Toshiba 15LZJ28, 15LZU28X, 15LZR17, 15LZR28 User Manual

SAFETY INSTRUCTIONS AND MAINTENANCE

SAFETY INSTRUCTIONS AND MAINTENANCE (continued)

SPECIFICATIONS

OWNER'S MANUAL

Color Television

15LZR 17/28 15LZJ 28 15LZU 28X

Owner's Record

You will find the model number and serial number on the back of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your TOSHIBA dealer regarding this product.

Model number:

Serial number:

For safety

1) If and when anything abnormal occurs, unplug the power cord from the outlet immediately. Make sure that the smoke has stopped, then contact for a service. Continual usage of TV in such condition may cause a fire or an electric shock.

2) Do not cut, break, heat, modify, twist, bunch up or bent the cord or apply excessive force or tension to it, as this may cause damage, fire or electric shock. Contact a service technician if the power cord is damaged.

3) Do not pull on the power cord when removing the plug from the wall outlet. Always hold the plug firmly when removing it. If the power cord is yanked, the cord may become damaged and fire or electric shock may occur.

4) Do not repair, modify or disassemble the TV by yourself. Let qualified technicians check and adjust your TV. To avoid electrical shock or fire, never modify the TV.

5) Do not place hot objects or naked flame sources, such as lighted candles or nightlights, on or close to the TV. High temperature can melt plastic and lead to fires.

6) The TV shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the TV. This may cause a fire or electric shock.

7) Do not let metallic materials and/or combustibles get in the TV. These items may cause a fire or an electric shock. Be especially observant when children are present.

8) Do not stand or climb on the TV. The TV is dangerous if it is broken or if it has fallen down. Be especially observant when children are present.

9) When the TV will not be used for a long period of time, unplug the power plug from the outlet for safety. The main power plug or an appliance coupler is used as a disconnecting device and therefore should be remain readily operable.

10) During lightning storm, do not touch any part of the TV, including the power cord and the antenna lead-in-wire. You may suffer an electric shock.

2) 3) 4) 5), 6)

7) 8) 9) 10)

Notes on installation and on use

11) Place the TV on a horizontal, stable surface. Avoid location subject to vibration. Do not place the TV on its side or back. Otherwise, the TV may drop or fall off which may cause injury or damage.

12) Do not block the ventilation holes. Place the TV at least 10 cm away from the walls for good air circulation. The inside of this TV will overheat if the ventilation holes are sealed, which may result in a fire.

13) Take measures to prevent the TV from falling over. If not, the TV may lean or fall over and cause an injury. When moving, watch out for the ties.

14) Avoid placing the TV in direct sunshine, near a heating source or places with a high temperature, such as in a closed car. A fire may result when the inside temperature increases.

15) Also avoid the placing the TV on dusty or damp places. This may cause a fire or electric shock.

16) Set up the outdoor antenna away from high ways, power lines and neon signs. If the antenna falls down or drops, it may cause injury or electric shock accidents. The antenna should be checked and replaced periodically.

17) Do not jolt the TV, resulting in the TV falling over, dropping or causing an injury.

18) Keep magnets, electric clocks, speakers, etc. away from the TV.

19) Do not spray volatile compounds such as insecticide on the cabinet. This may cause a discoloration or damage of the cabinet.

Notes on cleaning

20) Before cleaning, unplug the power plug. Clean the cabinet with a soft and dry cloth. Do not use benzine, thinner, etc. to clean the TV.

21) Sometimes disconnect the power plug from the outlet and check it. If dust has collected on the power plug connectors, clean off the dust.

12) 14)

16) 20) 21)

13)

Not lean

and

protrude

Sturdy tie

MODEL 15LZR17 / 15LZR28 / 15LZJ28 / 15LZU28X

Rated voltage 15LZJ28:

~ 110 V–240 V, 50/60Hz

15LZR17 / 15LZR28: ~ 220 V–240 V, 50Hz

15LZU28X:

~ 220 V, 50Hz

Power consumption

(at ~ 220 V, 50 Hz)

Dimensions (Width x Depth x Height)

457.5(W) x 393.0(D) x 352.5(H) mm

67W

Mass 12.1 kg

Picture tube Type 15 Flat square picture tube

(393.4mm) Overall picture tube measured diagonally (355.6mm) Viewable picture tube measured diagonally 90° deflection

Television Channel System Channel VHF UHF CATV system coverage (Antenna input)

PAL B/G CCIR 2 – 12 21 – 69 X ~ Z+2, S1 ~ S41 PAL I U K — 21 – 69 — PAL D/K CHINA 1 – 12 13 – 57 Z–1 ~ Z–38 SECAM B/G CCIR 2 – 12 21 – 69 X ~ Z+2, S1 ~ S41 SECAM D/K OIRT 1 – 12 21 – 69 X1 ~ X19 NTSC M US 2 – 13 14 – 69 A–6 ~ A–1, A ~ W, AA ~ ZZ, AAA, BBB NTSC M JAPAN 1 – 12 13 – 62 M1 ~ M10, S1 ~ S41

Special RF Color system Sound system signal NTSC4.43 5.5/6.0/6.5 MHz

PAL 60Hz 5.5/6.0/6.5 MHz

Color system PAL/SECAM/NTSC4.43/NTSC3.58

Sound output 2.5 W X 2

Speaker 4 X 11cm (2)

Terminal For 15LZR17

Input [a(1), front and back]: Video, Audio (monaural) Output [

>(MONITOR)]: Video, Audio (monaural)

For 15LZJ28 / 15LZR28 / 15LZU28X

Input [a(1), front and back]: Video, Audio L, Audio R Output [

>(MONITOR)]: Video, Audio L, Audio R

Headphone output: Ø3.5 mm (mini jack)

Accessories • Remote control (1) • Rod antenna (1)*

• Batteries (R03, AAA) (2) * 15LZJ28 only

• This Owner's Manual

Design and specifications are subject to change without notice.

Help to recycle, this product indicates material names on main plastic parts.

GETTING STARTED

• The illustrations in this manual are of 15 LZJ28 model, if otherwise , it will be stated.

Connect the antenna to at the rear of the TV.

Adjust to the best possible reception

Rod antenna (supplied*)

VHF

Outdoor antenna (optional)

Mixer

75-ohm coaxial cable

* 15LZJ28 only

UHF

Connect the power cord to an electrical outlet ~110V-240V, 50/60Hz

(15LZJ28)

~220V-240V, 50Hz (15LZR17 / 15LZR28) ~220V, 50Hz (15LZU28X)

Notes

• Do not connect the power cord until all your equipments have been connected.

• The antenna cables should not be bundled with the power cord and the like.

Insert the batteries into the remote control.

Requires two R03 (AAA) batteries

• If the remote control does not operate correctly, if the operating range becomes reduced, replace both batteries with new ones.

• When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries to prevent leakage.

• Do not drop, dampen or disassemble the remote control.

Cautions

• Do not dispose batteries into fire. Dispose batteries into the designated disposal areas according to the local regulations.

• Do not mix battery types or combine used batteries with new ones.

Operating range

Remote sensor

Push the q (Power switch) on the front of TV until it clicks to turn on

the power.

Refer to page section J for details on power on and off.

Preset the channels automatically (ASM function).

Use remote control for this operation. The buttons on the TV with similar name may also be used.

1 Select the starting position for channel

to be preset. Press the Number buttons (-/--, 0~9) or CH s/t.

2 Set the correct broadcast system for

your region. Press MENU and then

-/+ to highlight the “ SET UP” icon.

;

Confirm “COLOR” is set to “AUTO” and “SOUND” is set to proper system. (Refer to the table on page section G.) If not, press CH s/t to select “COLOR” or “SOUND” and press ;

-/+ to set each

proper system.

3 Press MENU and then ;

the “ then press ;

TUNING” icon. Select “ASM”,

+ to start the search. When the TV screen returns to the start position, the procedure is completed.

Press ; -/+ to adjust the sound volume.

Printed in Indonesia

VX1A00014100

-/+ to highlight

EXTERNAL EQUIPMENT CONNECTIONS

• You can connect video equipments such as a VTR and video camera to this TV and enjoy the high quality picture. The front A/V terminal a (1) is convenient when hooking up video camera or game equipment.

• The following describes how to use and connect the TV with other AV equipment. Refer to the owner’s manual of the equipment to be connected as well.

• Connection cables are not supplied.

Caution: Do not plug in any power cords until you have finished connecting all equipment.

For 15LZJ28 / 15LZR28 / 15LZU28X models

Front

To video/ audio outputs

Video camera

W Y

To video output

W Y

PLAY BACK

Back

For 15LZR17 model

Front

To video/ audio

outputs

Video camera

> MONITOR terminals output the TV

• The

To video output

W Y

PLAY BACK

program or video (A ) signals being displayed on the screen. You can record a TV program or video signals by connecting a VTR from the output terminals (

> MONITOR) to

the input terminals of the VTR. However, except for personal use, you are not allowed to use video or sound you have recorded without consent of the owner of copyright according to copyright law.

To audio outputs

Back

To audio output

AUDIO

VTR etc.

VIDEO

L/MONO

VIDEO

AUDIO

(1)

VIDEO

L/MONO

AUDIO

To audio inputs

VTR (type without built-in tuner)

(MONITOR)

VIDEO

AUDIO

To audio input

VTR (type without built-in tuner)

(MONITOR)

Notes

• Connect the equipment to either front or back a (1) terminal. Audio and video interference may occur if both terminals are connected.

• Do not connect one VTR to the output and input terminals on the TV simultaneously, it may cause interference.

• For 15LZJ28 / 15LZR28 / 15LZU28X models, when connecting the audio signal to a monaural equipment, connect AUDIO L or R terminal of the TV to the AUDIO terminal of the equipment.

• For 15LZR17 model, when connecting the audio signal to a stereo equipment, connect them to the L/MONO terminal of the equipment. Otherwise, connect the audio signal to either L or R terminal.

: Signal flow : yellow (Video)

: white (Audio L/MONO)

: red (Audio R)

YWR

To video input

: Signal flow : yellow (Video)

: white (Audio)

To video input

REC

TROUBLESHOOTING

Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing.

Symptom Solution

Power is not turned on. • Be sure the power cord is plugged in.

No sound. • The headphones may be plugged in.

Poor color/tint. • The contrast, color and tint may need to be adjusted.

• If you change the direction of the TV while the TV is on, the picture may suffer from color shading. If so, turn off the TV and allow about 30 minutes to cool, then turn on the TV again. The picture may be improved.

Spots appear on the • The broadcast signal may be jammed by other electrical sources screen. such as cars, motorcycles, electric trains, high tension lines, neon

signs, hair dryers.

Lines appear on the • The broadcast signal may be jammed by other TV receivers, screen. personal computers, and TV games, as well as interference from

radio stations.

Double or triple images. • Interference may be due to broadcast waves reflected from

mountains or buildings.

• Check if the direction of the antenna has changed due to strong wind.

Snowy picture. • The antenna lead may be broken or disconnected.

• Check if the direction of the antenna has changed.

Remote control does • The batteries in the remote control may be exhausted. not work. • The batteries may be improperly installed.

• Check that there is no obstruction between the remote control and the remote (infrared) sensor.

• Check that a strong light is shining on the remote (infrared) sensor.

• Check that the main power is not turned off.

The following phenomena are not malfunctions

The cabinet clicks. • The clicking is a creaking sound produced when the cabinet

expands or contracts due to changes in the temperature. This will not affect the picture or sound.

Unevenness in color • If the brightness is set too high, such unevenness in color may sometimes develops occur depending upon the nature of the picture. The proper color in part of the screen. can be restored by reducing the contrast.

OTHER INFORMATIONS

Exemptions

9 Toshiba is not liable for any damage caused by natural disaster (such as thunder, earthquake),

fire, acts by third parties, accidents, misuse, or uses in other improper conditions.

9 Toshiba is not liable for incidental damages (such as profit loss or interruption in business,

modification or erasure of record data, etc.) caused by use or inability to use of product.

9 Toshiba is not liable for any damage caused by neglect of the instructions described in the

owner’s manual.

9 Toshiba is not liable for any damage caused by misuse or malfunction through simultaneous

use of this product and the connected equipment.

Broadcast Transmission Systems in Each Country or Region

System

Area Country or Region

Bahrain, Kuwait, Israel, Oman, Qatar, United Arab Emirates, Yemen, and other middle Eastern countries. PAL B/G Indonesia, Malaysia, Singapore, Thailand, and other Southeast Asian Countries.

Asia M. E.

Oceania Australia, New Zealand PAL B/G

Africa Republic of South Africa PAL I

South America

Notes

• PAL, SECAM and NTSC3.58 are different color signal broadcast transmission systems applicable to different country or region. NTSC4.43 (MHz) are used in some VTRs to playback NTSC recorded video tapes through PAL television equipment.

• Refer to the Specifications table to find the receivable television systems for this TV.

China PAL D/K

China Hong Kong PAL I

Iraq, Islamic Republic of Iran, Lebanon, Saudi Arabia SECAM B/G

Russian Federation SECAM D/K

Myanmar NTSC M

Argentina, Paraguay, Uruguay PAL N

Brazil PAL M

Chile, Colombia NTSC M

Color Sound

En01_01[15LZR17/28/JU28X]-8 21/6/06, 2:59 PM1

NAMES AND FUNCTIONS OF CONTROLS

SELECT /ADJUS

CTURE

100

MENU FUNCTION

BASIC OPERATIONS

PICTURE ADJUSTMENT

For details on the use of each control, refer to the page sections in [ ] box.

TV Front and Remote control

1 2

*1 The AUDIO R is not available for 15LZR17 *2 l - For 15LZR17

L - For 15LZJ28, 15LZR28 and 15LZU28X

TV Remote Control

a q Main power on/off J b Remote sensor D

q Power indicator (red) J

c d MENU Turn on menu display I e a Input source selection, press

repeatedly to select A or channel position number cyclically

– ; + Volume down/up D, J

Menu selection or item adjust I

g tcs Channel down/up J,

Menu item selection I

/ Headphones jack (Ø3.5mm)/

h l

Stereo headphones jack (Ø3.5mm) For private listening. The sound from the speakers will be cut off automatically.

i AUDIO Audio input terminals

j VIDEO Video input terminal E

Note: The shaded buttons are not available for your TV. If you press the button, “MODE NOT

AVAILABLE” will appear on the screen.

1 f Power on/standby J

2 o Sound Mute, press again or

-/+ to restore the sound.

;

3 0~9 Number buttons J

4 a Input source selection, press

repeatedly to select A or channel position number cyclically

5 MENU Turn on menu display I 6 CH s/t Channel up/down J,

Menu item selection I

7 CALL On-screen on/off, J

Turn off the menu J

8 -/-- Digit selection J

-/+ Volume down/up J,

9 ;

Menu selection or item adjust I

0 h Picture menu K

- Colored buttons for GAME mode N

Before watching the TV, please familiarize yourself the method to use the menu function of this TV. Instructions in this manual are based on using the remote control. Press the MENU to display menu, then press the ; Press the CH s/t to select an item and then press the ;

-/+ to select menu.

-/+ to select or adjust setting.

Menu display chart

Notes

• If you do not make a selection within 15 seconds, the menu display disappears automatically.

• To return to the previous menu, press MENU.

•The

area on the SET UP and TUNING menu display does not appear when video input source

is selected.

To turn TV on/off

1 Press the q power switch on the TV. The

q red power indicator lights up.

2 If no picture appears, it is in the standby

mode, press the

f button on the remote

control.

Notes

• You can also turn on the TV by pressing one of the Number buttons (0~9) on the remote control instead of the

f button.

By pressing the number (one digit only) where the channel you want to watch is preset, you can turn on the TV and channel selection at the same time.

• When the remote control is not at hand, you can turn on the TV by pressing the

a, – ;

+ or tcs button on the TV.

3 To switch to the standby mode, press the

button.

4 To turn off the main power, press the

power switch.

Auto Power Off

The TV will automatically turn off after about 15 minutes if it is tuned to a vacant channel, TV broadcasts for a day are finished, or the signal is interrupted for any reason. This feature does not work in video input mode.

Selecting the channels

• Press -/-- to select the input digit of position number and then press 0~9 to select the number. (e.g., for 25, press -/-- to display “--”, then 2 and 5)

• Press t to select lower position number, s to select higher ones.

Selecting the menu language

Choose from six different languages (English, Russian, French, Arabic, Persian and Swahili), select to display all on-screen Menus in your language of choice. 1 Press MENU and then ;

LANGUAGE” icon.

“

2 Press CH s/t, then press ;

-/+ to highlight the

-/+ to select the

desired language.

KISWAHILI

To display on-screen information

Press CALL to display the position number or video input mode selected (A). To erase the display, press CALL again.

Position number or video input mode

The CALL button can also be used to erase the on-screen menu display.

Color and Sound system

If the color or sound of a certain channel is abnormal

The color or sound system setting may be incorrect. Press MENU and then ;

SETUP” icon.

“ Press CH s/t to select the following items:

COLOR system setting

Select the appropriate color system with ; AUTO, PAL, SECAM, NTSC4.43 and NTSC3.58 will appear cyclically.

SOUND system setting

If the picture or sound is abnormal when receiving programs through the terminal, the sound system setting may be incorrect. Select the appropriate sound system with ;

-/+ according to the broadcast system

of your region. Refer to the table on OTHER INFORMATIONS page section G. I, D/K, M and B/G will appear cyclically.

-/+ to highlight the

-/+.

(antenna)

Picture quality adjustment

To access the PICTURE menu

Press for direct selection or press MENU and then ;

Press CH s/t to select the following items:

Preset picture mode

Four modes can be selected cyclically by pressing ;

-/+ to highlight the “ PICTURE” icon.

NTRAST

HTNE

BR COLOR TINT SHARPNESS

BLUE SCREEN

SELECT / MENU

-/+.

50 00 00

select for a bright and dynamic picture

STANDARD

select for standard picture settings

select to display a softer picture select for a picture quality set according to your preferences

CONTRAST Adjust to increase or decrease

the picture contrast with ;+ or ;- respectively.

BRIGHTNESS Adjust to brighten or darken

the picture with ;+ or ;respectively.

COLOR Adjust to increase or

decrease the color intensity with ; + or ; - respectively.

TINT Adjust the picture to be more

greenish or more purplish with ; + or ; - respectively. This effect is provided for NTSC system only.

SHARPNESS Adjust to sharpen or soften

the picture with ;+ or ;respectively.

BLUE SCREEN With the blue screen function

ON, the TV screen will automatically turn blue and the sound will be muted when no TV signal is received. Press ; -/+ to set ON or OFF.

Notes

• Any adjustment of the BRIGHTNESS, CONTRAST, COLOR, TINT or SHARPNESS settings will be stored in the MEMORY mode.

• If you adjust any of these items: BRIGHTNESS, CONTRAST, COLOR, TINT or SHARPNESS in the DYNAMIC, STANDARD or MILD modes, the TV will automatically change to the MEMORY mode.

TIMER SETTING/CHANNEL PRESETTING TV GAME MODE

Setting the Timer

With the OFF timer, the TV will automatically switch to standby mode at a preset time.

To access the TIMER menu

1 Press MENU and then ; -/+ to highlight

TIMER” icon.

the “

2 Press CH s/t to select the “TIMER OFF”

timer mode, press ; -/+ to set after how many hours and minutes you want the TV to switch into standby mode.

When you ; -/+ Setting time is

;

press once

hold down

+ increased by 1 minute

; - decreased by 1 minute

;

+ increased by 30 minutes

;

- decreased by 30 minutes

To cancel the OFF timer

Press the f button twice (to turn off the TV once and turn it on again) or set the OFF time to 00:00.

Presetting channel

• First, use the ASM (Automatic Search Memory) function to preset all active channels in your area automatically. Refer to step 5 of “Getting Started”, page section D. Then, arrange the preset channels with the SEARCH, SKIP and MFT (Manual Fine Tuning) functions so that you can tune into only desired channels.

• Use the SEARCH function if desired channels cannot be preset with the ASM or if you would like to preset channels to specific position numbers one by one.

To use the SEARCH function

1 Press MENU and then ; -/+ to highlight

the “

TUNING” icon.

2 Press CH s/t to select “SEARCH”. Press

;

-/+ to start searching. Pressing “–” searches for channels at lower frequencies while pressing “+” searches for channels at higher frequencies. While searching, pressing the opposite direction button, + or - respectively, will cancel SEARCH function.

STOP ( + )

V L 1

STOP

Repeat this process until you can get the desired channel.

3 When the desired channel is shown, press

CH t to select “POSITION”. Press the ;

-/+ buttons repeatedly until the position

number to be preset is shown.

4 Press CH s/t to select “MEMORY”, then

press ;

+ to memorize the channel at the

current position.

5 When you program other channels, repeat

steps 2 to 4.

To skip a position number

After presetting the channels, you may skip unnecessary position numbers so that only the channels you want to watch are selected using CH s/t.

1 First, select the position number to be

skipped with CH s/t or digit selection and number buttons (-/--, 0~9).

2 Highlight the “

CH s/t to select “SKIP”.

3 Press the ;

completes the setting for skipping the selected position number.

SET UP” icon and press

-/+ to set “SKIP” to “ON”. This

CHANNEL PRESETTING (continued)

Notes

• When “SKIP” is set to “ON” for the selected position number, a “ * ” mark appears to the left of the position number.

The position number will then be skipped when you select the position with the CH s/t buttons.

• If you want to restore a skipped position number, select it using the -/-- and 0~9 buttons then switch the “SKIP” setting to “OFF”.

Manual fine tuning (MFT)

The adjustments below are not necessary under normal conditions. However, under some reception conditions, fine tuning may be necessary to improve the picture quality. In such cases, adjust the manual fine tuning (MFT).

1 Select the position number where the

channel you want to fine-tune with CH s/t or digit selection and number buttons (-/--, 0~9).

2 Press MENU and then ;

the “

TUNING” icon.

3 Press CH s /t to select “MFT”. Press

;

-/+ to start fine tuning. Press ; -/+ repeatedly until the best possible picture and sound are obtained.

Auto fine tuning (AFT)

If the signal frequency is unstable due to environmental conditions, use auto fine tuning.

1 Select the position number where the

channel you want to fine-tune with CH s/ t or the digit selection and number buttons (-/--, 0~9).

-/+ to highlight

Note

When the position is set to “AFT OFF” status, the “R” mark appears to the left of the position number.

When the channel is set to “AFT ON” status, the position number is displayed without the “R” mark.

2 Press MENU then ;

“

TUNING” icon.

3 Press CH s/t to select “AFT”. Press ;

to select the “ON” indication.

Notes

• When you operate MFT, AFT is switched “OFF” automatically. If you switch on AFT after fine tuning with MFT, MFT may be canceled.

• AFT may be set independently for each position.

-/+ to highlight the

-/+

To play TV games

To select TV game mode

Press MENU and then ; -/+ to highlight the

GAME” icon.

“

Press CH s /t to select the desired game, HITTING, SLOT or DICE, and then press ; enter to the selected game mode.

In the game mode menu, the function selection located at the bottom of the screen are displayed in different colors. Press the colored button respectively to select the following functions.

START - Select to start the game. MENU - Select to return to GAME selection

MIX - select to superimpose the OSD on

TV - select to turn off the GAME function

STOP - While playing the HITTING game,

PAUSE - select to pause the game while

BET - Select to set the BET POINTS while

HITTING game

This game is played as competing the high score point which exists beating the Martian character with the hammer.

1 When enter into the HITTING game mode,

menu.

the normal TV program with contrast down.

and normal TV program appears on the screen if there is.

select STOP will stop the game, the “GAME OVER” OSD will appear on the screen.

- While playing the SLOT or DICE game, select to stop the number window or dice from changing.

attending to some other things.

playing SLOT game.

press Red button to start the HITTING game.

RECORD

SCORE

ST OP

PA U S

MIX TV

2 The number buttons (1-9) corresponds to the

position of each hole on the screen.

3 Martian character appears from 9 holes on

the screen randomly. When the Martian character appears from the holes, the character have to be hit with the hammer by pressing corresponding button(1-9).

4 If the player hits the Martian character, the

+ to

score will increase. The earlier the Martian character is hit, the higher the score is. Bigger size Martian character score higher than the smaller one.

5 If the Martian character cannot be stricken

with the hammer, or the bomb is stricken, the heart decreases. The heart mark displayed on the top-right of the screen, decreases upon every failed hitting.

6 When the game started, 10 hearts are given

to one’s shares. When heart mark decreases to zero, the game ends & “GAME OVER” appears. The game becomes difficult as the point of the score rises. Every 1000 points increases one heart until a maximum of ten. If the score is more than the RECORD score, the RECORD will be upgraded.

Note

The Game Logos appear one by one as the following sequence, and the score shown below if the player hits them when they appear.

Small Martian character

Big Martian character

Bomb

TV GAME MODE (continued)

SLOT game

This is a slot machine game. Three sets of numbers, 1 through 8 and the pictogram appear changing randomly in each window. Player need to stop the number one by one, the score will depend on the combinations of the numbers.

1 To play, after entering into the SLOT game

mode, press Red button to set the BET POINTS. Each press increment of 1 POINT. A BET must be placed before playing the game. As many as 10 POINTS can be bet at a time.

1 3 4

BET

SCORE

000200

BET MENU

2 Your SCORE start out with 200 POINTS,

points are won or lost, depending upon how much is bet.

3 Press Green button to start the game. Each

window turns to quick and random change mode simultaneously.

4 The windows stop changing from left to

right, one by one, each time you press Red button. Messages appear, depending on the window combinations:

When the first two windows are the same

“REACH” appears in the centre of the screen.

When no windows are the same

“LOST” appears in the centre of the screen, and the current bet is lost. The game returns to the BET mode.

When two or all the three windows are the same

“WIN” and “ODDS X_ _ _” are displayed for a moment, and your BET is multiplied by “– – –”. This total is added to your SCORE. The BET setting is then reset to 0 and the game returns to the BET mode.

5 Repeat steps 1 through 4 to play again. 6 When your SCORE is 0, the game ends.

“GAME OVER” appears.

POINT

MIX TV

Note

The odds and payback vary according to the window combination.

Combination Odds

7 7 ∗ x 5 7 ∗ 7x 5 ∗ 7 7 x 5

∗ x 10 ∗ x 10

∗ x 10

x 300

1 1 1 x 100 2 2 2 x 100 3 3 3 x 100 4 4 4 x 100 5 5 5 x 100 6 6 6 x 100 8 8 8 x 100 7 7 7 x 200

DICE game

This is a dice game in which two players compete by casting three dice and totaling the score.

1 When enter into the DICE game mode, the

display below appears. The right “00” and the left “00” are the scores for player 1 and player 2, respectively.

ST ART MENU

MIX TV

2 Press Red button to start the game. The

three dice start spinning randomly for player

3 Press Green button repeatedly to stop the

dice one at a time, from left to right. When all the dice are stopped, the total of the dice is added to the score for player 1.

4 Switch to player 2, and repeat steps 2 and

3. The dice total is added to the score for player 2.

5 Repeat steps 2 through 4 to play again.

En02_02[15LZR17/28/JU28X]-8 5/7/06, 6:25 PM2