Toro STX-38 Stump Grinder Sell Sheet
STX-38 EFI
Stump Grinder
HYDRAULICALLY DRIVEN HEAD
• Eliminates labor of tightening
or replacing costly poly-chain
®
belts or clutches
• No need to replace expensive
cogged pulleys
• No worry of customers engaging
grinder head at full throttle
• Eliminates shock loads to the
engine from belts slipping or
head stopping
• Heavy-duty sealed, greaseable
bearing housing and cutter shaft
minimize maintenance
• Intelli-Sweep feature automatically
adjusts sweep speed based on
the load on the wheel to
maintain optimal operation
• Cutter head and guard
design allow for exceptional
below-grade grinding and
chip management
HI-DRIVE TRACK SYSTEM
• Low center of gravity and large
footprint increase stability on
side hills
• Eliminates tire ruts and flat tires
• Operates in soft, wet ground
conditions
• Track design climbs curbs and
allows for zero turn capability
USER-FRIENDLY DESIGN
• Single-cylinder sweep and lift
design delivers a straight cut
• All-hydraulic sweep control valve
facilitates side-to-side feathering
• Kohler® Command PRO®
ECV980cc engine with electronic
fuel injection (EFI) and electric
start delivers reliable power
• 34" machine width — easily fits
through 36" gates
• Frame design provides excellent
cutter wheel visibility
THE TORO® STX-38 EFI STUMP GRINDER is built for outstanding durability in the
toughest conditions. The STX-38 now features an electronic fuel injected engine and a
redesigned cutter head for the best performance and grinding ability on the market. Fully
hydraulic cutting operation means no chance of expensive belts breaking or slipping and no
tension adjustments. The Intelli-Sweep™ feature automatically slows the sweep speed of the
cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the
engine. And with easy-to-use TX-style controls and tracks for maneuverability and stability, the
STX-38 EFI is extremely operator-friendly. Best of all, ground speeds of 4.5 mph allow you to
spend more time grinding — and less time transporting the machine — for greater productivity.
FEATUR ES
Stump Grinder
STX-38 EFI
MODEL 23214
Engine
Kohler
®
Command PRO® ECV980 980cc
38 hp 4-cycle gasoline air-cooled engine
Hydraulics
Dual hydrostatic traction drive – 16 cc hydropumps with
15 gpm max flow to each side; 20 gpm gear pump flow to
the piston motor driving the cutter head
Wheel 21.6" diameter to tooth; 1" thick; 16 Greenteeth cutting teeth
Cutter Depth 18" below grade
Cutter Height 35" above grade
Head Swing 52" radius x 60˚ sweep arc
Dimensions 34" (86 cm) W x 95" (241 cm) L (transport) x 51" (130 cm) H
Weight 1750 lb (794 Kg)
Max. Travel Speed 4.5 mph
Compliance CE and EPA compliant
Produc ts depicted in t his literature are for demonstrat ion purposes only. Actual product s offered for sale may var y in
use, design, required attachments and safety features. We reser ve the right to improve our prod ucts and make changes
in specifications, des igns and s tandard equipm ent without notice and without incur ring obligation. See your dealer for
details on all of our warranties.
STX CONTROL SYSTEM
OPERATES WITH TWO
EASY CONTROLS
Easy-to-use control system offers
smooth operation and fewer levers/
knobs than conventional stump
grinders. An armrest near the joystick
also reduces operator fatigue.
1 Steering System (forward, reverse,
turn) allows for zero turn capability
2 Sweep, lift/lower and engagement
of grinder head
490 -88 97
©2014 The Toro Company
All Rights Reserved.
Worldwide Headquarters
The Toro Company
8111 Lyndale Ave. So.
Bloomington, MN 55420
Phone: 1-952-888-8801
toro.com
SPECIFICATIONS
Advanced Performance
& Easy Operation
STX-38 EFI
Loading...