Toro Reelmaster Universal Frames, Reelmaster Transport Frames Specifications

Reelmaster® Frames & Cutting Units

CUTTING CAPACITY

LIFTING MECHANISM

MAIN FRAME

WING LIFT ARMS

AXLE ASSEMBLY

TRAILER TRANSP. WHEELS

TRAILER TONGUE

CONTROL TOWER

JACK

HYD. SYSTEM CAPACITY

HYD. SYSTEM COUPLERS

HYDRAULIC VALVE

HYDRAULIC CYLINDERS

HYDRAULIC HOSES

CUTTING UNITS

FRAME DIMENSIONS

OPTIONS

WARRANTY

Reelmaster frames give you economical options that

afford you flexibility, maneuverability and transport

ease. Proven, ground driven Reelmaster 5, 7 or 11

Blade Cutting Units provide the finishing touch –

a quality of cut you’ve come to expect.

REELMASTER TRANSPORT FRAME - 5 UNIT, MODEL 33455 - 5 TO 7 UNIT CONVERSION KIT, MODEL 33452

6.7 acres/h (2.7 hectares/h) @ 5.5 mph (8.8 km/h) with 5 Unit Frame. 9.4 acres/h (3.8 hectares/h) @ 5.5 mph (8.8 km/h) with optional 7 Unit Frame. Assumes no reduction in total area mowed due to overlap, turning, stops, etc.

Hydraulic lift - 1st, 2nd and 3rd cutting units operate together. Cutting units 4 and 5 (and optional 6 and 7) operate individually.

Tubular and structural steel; bolted and electrically welded construction.

Tubular steel, reinforced welded construction.

Implement type. Maximum load capacity is 4940 lbs. (2241 kg) at maximum tire inflation of 28 psi (1.9 bars).

6 bolt, 15 x 8" implement style wheels with 11L-15, 6-ply rating implement rib tires. Recommended tire pressure: 24-28 psi (1.6-1.9 bars).

Tubular and structural steel; welded construction. Trailer clevis is adjustable to 3 positions.

Adjustable to 12.5" (32 cm) fore/aft and 7" (18 cm) up and down; controls are operable from tractor seat.

Side-screw type trailer jack. 10" (25.4 cm) stroke. Stores inside trailer tongue when not in use. Load capacity: 2200 lbs. (998 kg).

2 gallons (7.6 liters) hydraulic oil with cylinders retracted.

Quick-disconnect coupler for easy hook-up to tractor.

Heavy duty directional control valve, parallel circuit open center, stack design. Cast iron valve bodies with hardened spools and plated for corrosion protection. Primary relief valve [approx. 1500 psi (103.4 bars)] shim adjustable. Relief valve prevents excess pressure build-up in the hydraulic system and safeguards the hydraulic pump and hoses.

Tie rod construction, 3" (7.6 cm) bore, double-acting cylinders; chrome-plated rods 1.375" (3.5 cm) diameter for units 1, 2, and 3; and 1.125" (2.8 cm) diameter for units 4, 5, 6, and 7; all with precision finished bore in cylinder tubes.

SAE 100R7, two braid, 1/2" (12.7 mm) ID feed line hoses from tractor to valve body. SAE 100R7, two braid, 5/16" (7.9 mm) ID cylinder hoses from valve body to hydraulic cylinders.

Reelmaster 5, 7 or 11-blade cutting units.

Transport Frame Tread Transport Mowing Transport Weight w/ w/ Cutting Unit Width Length Width Width Height Cutting Units Clearance

5 Unit Frame 68" 150" 7' 11" 11' 58" 2760 lbs. 71/2" (19 cm) (173 cm) (381 cm) (241 cm) (335 cm) (147 cm) (1252 kg) 7 Unit Frame 68" 150" 7' 11" 14' 4" 58" 3560 lbs. 71/2" (173 cm) (381 cm) (241 cm) (437 cm) (147 cm) (1615 kg) (19 cm)

Conversion Kit, 18" (46 cm) Cutting Unit Wheels, P/N 51-3060: Using 18" (46 cm) semi-pneumatic cutting unit wheels. Kit is required for 6 & 7 position cutting units. Hitch Ball Couple Kit, P/N 53-9760: Coupler bolts directly to frame and replaces the standard clevis type hitch. 5-7 Conversion Kit, Model 33452: consists of component parts to allow the installation of two additional cutting units.

Two-year limited warranty. Refer to the Operator’s Manual for further details.

REELMASTER UNIVERSAL FRAME

FRAME UNITS

CUTTING WIDTH (APPROX.)

CUTTING CAPACITY

OVERALL WIDTH IN

CUTTING POSITION

MAIN FRAME CONSTRUCTION

CUTTING UNIT

OVERALL LENGTH

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

2014 Toro Commercial Equipment Guide 14-003-T Rev. 1/14

5 Unit — Model 33145 & 33155 (required) 7 Unit — Model 33145 & 33155 & 33165 (required)

5 Unit — 11' (335 cm) 7 Unit — 16' (488 cm)

Acres/hr at 5.5 mph (8.8 km/h)

5 Unit 7.2 (2.9 hectares) 7 Unit 10.5 (4.2 hectares)

Mowers w/ Iron Wheels Mowers w/ Rubber Wheels

5 Unit 12'4" (376 cm) 12'8" (386 cm) 7 Unit 16'10" (513 cm) 17'2" (523 cm)

Reinforced structural steel and tubular steel welded construction.

Reelmaster 5, 7 or 11-blade cutting units.

10' (304 cm).

The Reelmaster Frames & Cutting Units are manufactured in Tomah, WI ISO 9002 Certified Plant.

TYPE OF MOWING

HEIGHT OF CUT (HOC)

HOC ADJUSTMENT

REEL CONSTRUCTION

CHASSIS

CONSTRUCTION

REEL DRIVE

DIFFERENTIAL

AVERAGE CLIP

FREQUENCY

BEDKNIFE-TO-REEL

ADJUSTMENT

BEDKNIFE & BEDBAR

CUTTING UNIT

SUSPENSION

REAR ROLLER

BEARINGS

LUBRICATION

FRAME

APPLICATIONS

Reelmaster® Frames & Cutting Units Specifications* (continued)

REELMASTER GANG MOWERS - 5-BLADE, MODEL 01005; 7-BLADE, MODEL 01007; 11-BLADE, MODEL 01011

Reel Type Turf Application Width of Cut

5-Blade w/16" (40.6 cm) wheels Semi-formal 30" (76.2 cm) 5-Blade w/18" (45.7 cm) wheels Informal (rough) 30" (76.2 cm) 7 Blade Formal 30" (76.2 cm) 11 Blade Super-formal 30" (76.2 cm)

Reel Type Recommended HOC Range

11-Blade w/16" (40.6 cm) wheels .5" - 1.25" (12.7 mm - 45 mm) 7-Blade w/16" (40.6 cm) wheels .75" - 1.75" (19 mm - 45 mm) 5-Blade w/16" (40.6 cm) wheels 1.25" - 2.25" (32 mm - 57 mm) 5-Blade w/18" (45.7 cm) wheels 2" - 3" (51 mm - 76 mm)

Roller brackets adjust the height of cut, offering 53 individual settings in .040" (1 mm) increments.

5-Blade: 8.06" (20.4 cm) diameter with 5 medium carbon steel induction hardened blades. 7-Blade: 8.06" (20.4 cm) diameter with 7 medium carbon steel induction hardened blades. 11-Blade: 7.06" (18 cm) diameter with 11 medium carbon steel induction hardened blades. All Reels: blades are welded to seven, 7-gauge, steel spiders. 1.5" (3.8 cm) diameter shaft on tapered roller bearings with adjustment nut to compensate for

bearing wear.

Ribbed cast iron gear cases with tubular cross member. Front cross member provides lift point for the cutting unit to all Toro Reelmaster Frames. Front cross member provides frame rigidity.

Two ground engaged wheels transmit power to gear train in both sides. Machine cut hardened steel gears and clutch idler gear; 75T ring gear to 10T pinion gear through 14T disengaging idler gear. All gears are sealed from dirt. Reel to wheel speed ratio: 7.5:1.

The differential provides disengaging overrunning idler gear in the gear train to disengage reel for free wheeling in turns and transport.

Inch Millimeter Wheel Diameter Cuts Per Meter 11-Blade .58" 14.7 mm 16" (40.6 cm) 68 7-Blade .91" 23.1 mm 16" (40.6 cm) 43

5-Blade 1.28" 32.5 mm 16" (40.6 cm) 31 5-Blade 1.51" 38.3 mm 18" (45.7 cm) 26

Bedknife adjusts against reel positively with a single hand-controlled knob located at center of bedbar. Adjustment knob contains detent with .001" (.025 mm) movement of bedknife for each indexed position. No tools required. Top pivot points are greaseable.

High carbon steel bedknife attached to a fabricated steel bar; single screw adjustment pivots at three points on vibration isolating bushings with eccentric shoulder bolt leveling adjustment.

Drawbar attaches to two low pull points on cross tube. Chain pick up at center of cutting unit for transportation. System allows for flotation in all directions in mowing mode.

3.5" (8.9 cm) diameter steel roller has greaseable tapered roller bearings with a double lip oil seal and wear sleeve to help keep out grit and moisture. Roller brackets adjust the height of cut.

The reel, roller and wheels have adjustable tapered roller bearings.

Gears and bearings are continuously lubricated from main reservoirs filled with 16 ounce (473 ml), 80-90 weight gear oil.

5 or 7 unit Reelmaster Transport Frame, 3 unit Reelmaster Lift Frame of 3, 5 or 7 unit Reelmaster Universal Frames. See Reelmaster Frame sales specification literature for more details.

OVERALL WEIGHTS[1] & DIMENSIONS (APPROXIMATE)

16" dia. w/ Semi-pneumatic Wheels, Model 01304

16" dia. w/ Pneumatic Wheels, Model 01323

16" dia. w/ Steel Wheels, Model 01336

18" dia. w/ Semi-pneumatic Wheels, Model 01035

5-Blade

Model 01005

239 lbs. (108.4 kg) 244 lbs. (110.6 kg) 248 lbs. (112.5 kg) 16" (40.6 cm) 41.375" (105 cm)

225.5 lbs. (102.2 kg) 230.5 lbs. (104.5 kg) 234.5 lbs. (106.3 kg) 16" (40.6 cm) 41.375" (105 cm)

237 lbs. (107.5 kg) 242 lbs. (109.7 kg) 246 lbs. (111.6 kg) 16" (40.6 cm) 41.375" (105 cm)

252 lbs. (114.3 kg) N/A N/A 18" (45.7 cm) 45.5625" (114.7 cm)

7-Blade

Model 01007

OPTIONAL ACCESSORIES

Part No. Description

47-4540 Roller Scraper Kit

47-5390 (11-blade) Grass Dispersion Shield Kit

13-3629 Overhaul Kit

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in design, required attachments and safety features. Consult your local Toro Distributor.

[1] Weights exclude drawbars.

2014 Toro Commercial Equipment Guide 14-003-T Rev. 1/14

11-Blade

Model 01011

Height

The Reelmaster Frames & Cutting Units are manufactured in Tomah, WI ISO 9002 Certified Plant.

Wheel Tread

Width