Toro P-220S Scrubber Series Data Sheet

P-220 Scrubber

Series

Valves

True dirty water irrigation valves, the Toro P-220S Scrubber

Series valves are built to handle chlorine, chloramine, and other
chemicals found in reclaimed and non-potable water systems.
Constructed of heavy duty, glass-filled nylon and EPDM rubber
components the P-220S valves feature Toro’s patent-pending
Active Cleansing Technology (ACT™), which helps prevent the
build-up of sand, algae, and other organic materials that may
inhibit water from metering properly through the valve.

Features & Benefits

Multiple Design Configurations

Available in 1”, 1.5”, 2”, and 3” inlet/outlet designs, all of which allow the
flexibility of globe or angle orientation.

Durable Glass-Filled Nylon Construction

Robustly built to operate at pressures of up to 220 psi.

Active Cleansing Technology (ACT™)

The industry’s first active scrubber valve cleans continuously, whereas
competing valves only clean upon their opening and closing.

Fabric-reinforced EPDM Diaphragm and EPDM Seat

Designed to work in virtually all water applications.

Rugged Internal Plastic and Stainless Steel Components

The ACT scrubber turbine, nut and metering system are constructed of
marine and aerospace-grade plastics and metals that make them resistant
to chlorine- and ozone-treated water.

Available with Precise Pressure Regulation

Compact EZReg® dial-design technology ensures precise downstream
pressure for optimized sprinkler head performance.

Completely Serviceable and Retrofittable

The ACT scrubber diaphragm assembly can be replaced, and can also be
retrofit into previously installed P-220 models.

“Scrubber” Turbine

Filter Surface

Effluent
Options
Available

DC Latching
Solenoid
Option

Pressure
Regulation

The P-220S Scrubber

The new P-220 Scrubber Series valves feature
Toro’s patent-pending Active Cleansing
Technology (ACT™) system. The ACT system’s
durable turbine is in constant rotation, which
in turn keeps the metering and filtration area
free of dirt and algae build-up. The turbine is
constructed of materials resistant to chlorine,
chloramines, and ozone, thereby keeping the
valve operating at peak performance.

P-220 Scrubber Series

Specifications

Dimensions

• 1” – 6 3/4” H x 3 5/8” W

• 1.5” – 7 1/4” H x 3 5/8” W

• 2” – 9 1/2” H x 6 1/8” W

• 3” – 10 3/4” H x 6 1/8” W

Operating Specifications

• Flow Range:
– 1”: 5 to 40 GPM
– 1.5”: 30 to 100 GPM
– 2”: 80 to 180 GPM
– 3”: 150 to 300 GPM

• Operating Pressure:
– 1” and 1.5” models: 10 to 220 psi
– 2” and 3” models: 20 to 220 psi

• Regulated Outlet Pressure Range:
– EZR-30: 5 to 30 psi +/- 3 psi
– EZR-100: 5 to 100 psi +/- 3 psi

• Minimum Pressure Differential (between inlet and outlet) for
Pressure Regulation: 10 psi

• Body Styles: Globe/Angle with female threads

• 102-5073 Solenoid:
– Inrush: 60 Hz, 0.4 amps
– Holding: 60 Hz, 0.2 amps

Specifying Information—P220S

P220S-2X-XX

Model Activation Type Solenoid Size

P220S 2X X X

P220S—P-220S Scrubber
Series

Plastic Valve

Example: A 2” P-220S Series plastic electric, pressure-regulating valve

26—NPT, Electric
27—NPT, Pressure­ regulated

EZR-100 (Standard)

would be specified as: P220S-27-08

0—Standard
Solenoid
9—DC Latching
Solenoid

4—1”
6—1.5”
8—2”
0—3”

Toro P-220 Scrubber Valve

Size Config.

Globe

1"

Angle

1.5"

For optimum regulation performance, size regulating valves toward the higher flow ranges.

Globe

Angle

Globe

2"

Angle

Globe

3"

Angle

5 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 180 200 250 300

4.63 4.74 3.10 6.05 10.75

4.14

4.64 2.54 5.53 9.46

1.14 1.56 2.85 4.36 6.28 8.57 11.20 14.03 17.20 20.46

0.95 1.51 2.28 3.69 5.29 6.97 9.26 11.80 14.60 17.40

Note: For optimum performance when designing a system, be sure to calculate total friction loss to ensure sufficient downstream pressure.

Gallons per Minute (GPM) Flow

www.toro.com

The Toro Company • Irrigation Division • 5825 Jasmine St. Riverside, CA • 92504 • 877-345-8676

Specifications subject to change without notice. For more information, contact your local Toro distributor. ©2014 The Toro Company. All rights reserved.
P/N 14-1069-IRC Rev. A

Additional features

• Internal and external bleed

• Available in electric or pressure-regulating models

• No external tubing for either pressure-regulating model

• Standard, built-in Schrader-type valve for downstream
pressure verification

• Flow control independent of solenoid

• Self-aligning bonnet to ensure correct installation

• Self-cleaning stainless steel metering rod

Options Available

• EZR-30: EZReg, 5-30 psi regulator module

• EZR-100: EZReg, 5-100 psi regulator module

• EFF-KIT-60HZ: Effluent Water solenoid assembly and
warning tag (lavender color; 24 VAC, 60 Hz)

• 102-5073: 24 VAC solenoid assembly (60 Hz, 18-inch leads,
and captive plunger)

• DCLS-P: Potted DC latching solenoid assembly

Warranty

• Five years

Model Description

P220S-26-04 P-220, 1" valve with ACT™ System
P220S-26-06 P-220, 1.5" valve with ACT™ System
P220S-26-08 P-220, 2" valve with ACT™ System
P220S-26-00 P-220, 3” valve with ACT™ System

P220S-26-94

P220S-26-96

P220S-26-98

P220S-26-90

P220S-27-04 P-220, 1" valve with EZReg® and ACT™ System
P220S-27-06 P-220, 1.5" valve with EZReg® and ACT™ System
P220S-27-08 P-220, 2" valve with EZReg® and ACT™ System
P220S-27-00 P-220, 3" valve with EZReg® and ACT™ System
P220S-KIT-04 1" Scrubber diaphragm assembly kit
P220S-KIT-06 1.5" Scrubber diaphragm assembly kit
P220S-KIT-08 2" Scrubber diaphragm assembly kit
P220S-KIT-00 3" Scrubber diaphragm assembly kit

3.57 4.62 5.33 6.80 8.20 9.02 10.46 11.61

2.79 3.50 4.41 5.62 6.39 7.35 8.81 9.37

P-220, 1" valve with ACT™ System and DC
Latching Solenoid

P-220, 1.5" valve with ACT™ System and DC
Latching Solenoid

P-220, 2" valve with ACT™ System and DC
Latching Solenoid

P-220, 3" valve with ACT™ System and DC
Latching Solenoid

2.06 2.34 2.70 3.88 4.86 7.26 10.23

1.86 2.16 2.44 3.35 4.11 6.42 9.31

Flow rates are recommended not to exceed 5 psi loss.