Toro P-220 Series Sell Sheet
P-220 Series
Valves
For proven reliability in the field, the Toro® P-220 Series valves
deliver. Constructed of heavy-duty, glass-filled nylon material,
these valves are ready to consistently withstand pressures up to
220 PSI.
Features & Benefits
Durable Glass-Filled Nylon
Ensures the P-220 can operate at pressures up to 220 psi.
Precise Pressure Control Option
Compact EZReg® dial-design technology (factory or field installed
- no need to remove solenoid).
Internal And External Manual Bleed
Keeps valve box dry and easy to use.
Effluent
Options
Available
DC Latching
Solenoid
Option
Pressure
Regulation
Schrader Valve Pre-Installed
Simple verification of downstream pressure.
Optional Spike-Guard™ Solenoid
Reduces wire size requirements, allows twice as many valves to
run simultaneously on a transformer, and lowers power costs with
a lightning rating exceeding 20,000 volts.
Filter Screen On 2” & 3” Models
Allows for upstream filtration of water to ensure no clogging
occurs inside the valve.
Water Management Highlight
Pressure Regulator
The EZReg® module can regulate with flows
of only 5 GPM with a 1" valve and it only
requires 10 psi differential to operate. The
pressure regulator can be easily and quickly
installed—even under pressure, with no
danger of water geysers.
P-220 Series
Specifications
Dimensions
• 1”: 6 ¾” H x 35⁄8” W
• 1½”: 7 ¼” H x 35⁄8” W
• 2”: 9 ½” H x 61⁄8” W
• 3”: 10 ¾” H x 61⁄8” W
Operating Specifications
• Flow Range:
– 1”: 5 to 40 GPM
– 1½”: 30 to 100 GPM
– 2”: 80 to 180 GPM
– 3”: 150 to 300 GPM
• Operating Pressure
– 1” & 1½ Models: 10 to 220 psi
– 2” & 3” Models: 20 to 220 psi
• Pressure regulating:
– Outlet (EZR-30): 5 to 30 psi ± 3
– Outlet (EZR-100): 5 to 100 psi ± 3
• Minimum pressure differential (between inlet and outlet) for
pressure regulation: 10 psi
• Body styles:
– Globe/Angle – 1”, 1½”, 2” & 3”
female threads
• 118-5982 Solenoid: 24 VAC (50/60 Hz) Standard
– Inrush: 60 Hz: 0.4 amps
– Holding: 60 Hz: 0.2 amps
Additional features
• Tough glass-filled nylon and stainless steel construction
• Internal and External bleed
• Pressure regulates in electric or pressure-regulating models
• No external tubing for either pressure-regulating model
• Standard, built-in Schrader-type valve for downstream
pressure verification
Additional features (continued)
• Flow control independent of solenoid
• Self-aligning bonnet to ensure correct installation
• Self-cleaning, stainless steel metering rod
• Low-flow capability down to 5 GPM with EZReg
®
• Low-power requirement for longer wire runs
Options Available
• EZR-30 - EZReg®, 5–30 psi Regulator Module
• EZR-100 - EZReg®, 5–100 psi Regulator Module
• EFF-KIT-60Hz - Effluent Water (Lavender) Solenoid Assembly (24
VAC, 60 Hz) and Warning Tag
• 118-5982 Solenoid: 24 VAC (50/60 Hz) Standard
• DCLS-P - Potted DC Latching Solenoid Assembly
• SGS-12 - Spike Guard™ Solenoid: 24 VAC (50/60 Hz)
Warranty
• Five years
P-220 Series Model List
Model Description
• P220-26-04
• P220-26-06
• P220-26-08
• P220-26-00
1” In-line, Angle
1½” In-line, Angle
2” In-line, Angle
3” In-line, Angle
Pressure-Regulated With EZ Reg
Model Description
• P220-27-04
• P220-27-06
• P220-27-08
• P220-27-00
1” In-line, Angle
1½” In-line, Angle
2” In-line, Angle
3” In-line, Angle
®
With Pre-Installed
Latching Solenoids
• P220-26-94
• P220-26-96
• P220-26-98
• P220-26-90
With Pre-Installed
Latching Solenoids
• P220-27-94
• P220-27-96
• P220-27-98
• P220-27-90
P-220 Series Friction Loss Data
11.20
8.90
2.70
1.60
GPM Flow
13.60
16.40
10.90
13.50
3.30
2.00
4.00
2.40
4.80
2.80
5.60
3.30
6.50
7.50
3.90
8.70
4.40
5.20
2.50
3.00
4.10
5.30
1.90
2.40
3.30
Flow rates are recommended not to exceed 5 psi loss.
4.30
6.70
5.50
8.30
6.90
10.10
8.50
Size Config.
Globe
1"
Angle
Globe
1
1
⁄2"
Angle
Globe
2"
Angle
Globe
3"
Angle
For optimum regulation performance, size regulating valves toward the higher flow ranges.
5 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 180 200 225 250 275 300
4.00
4.20
3.20
4.10
4.00
4.20
3.10
2.70
1.60
1.30
7.20
4.80
2.30
3.60
5.20
7.00
1.60
2.80
4.00
Note: For optimum performance when designing a system, be sure to calculate total friction loss to ensure sufficient downstream pressure.
5.50
9.20
7.10
2.10
1.20
Specifying Information—P220
P220-2X-X-X
Model Activation Type Solenoid Size
P220—P-220 Series Plastic Valve 26—NPT, Electric
P220
27—NPT, Pressure-regulated EZR-100 (Standard)
Example: A 1” (25mm) P-220 Series plastic electric, pressure-regulating valve would be specified as: P220-27-04
2X X X
0—Standard Solenoid
9—DC Latching Solenoid
4—1” (25mm)
1
6—1
⁄2”(40mm)
8—2” (50mm)
0—3” (80mm)
www.toro.com
The Toro Company • Irrigation Division • 5825 Jasmine St. Riverside, CA • 92504 • 877-345-8676
Specifications subject to change without notice. For more information, contact your local Toro distributor. ©2014 The Toro Company. All rights reserved.
P/N 14-1125-IRC
Loading...