Toro OEM-190-182 Operator's Manual
Form No. 3357-363 Rev. A
To The Owner • Carton Contents • Assembly • Parts Lists • Warranty
OPERATOR’S MANUAL
Twin Rear Bagger Kit
For FastAttach™ Garden Tractors
with 46” Deck
READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION
PRINTED IN U.S.A.
Models OEM-190-182
IMPORTANT
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
FORM NO. 769-01778
03/2005
This Operator’s Manual is an important part of your new grass collector. It will help you assemble,
prepare and maintain the unit for best performance. Please read and understand what it says.
Finding and Recording Model Number
BEFORE YOU START ASSEMBLING YOUR NEW EQUIPMENT,
please locate the model plate and copy the information from it in this Operator’s Manual for future reference. The information on
the model plate is very important if you need help from our Customer Support Department or your authorized dealer.
You can locate it by looking on the front, left portion of the plastic grass catcher cover as seen below:
Model Number Serial Number
*Locate the model plate on your bagger and copy the information from it in the space provided above for future reference.
Customer Support
Please do
purchased, without first contacting Customer Support.
If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this
unit, you can seek help from the experts. Choose from the options below:
• Visit mtdproducts.com. Click on the Service & Support menu option.
• Phone a Customer Support Representative at 1-800-800-7310.
• Please have your unit’s model number and serial number ready when you call. See previous section to locate this information.
You will be asked to enter the serial number in order to process your call.
NOT
return the unit to the retailer from which it was
2
Model Plate
Sample Model Number
1 3 A M 6 1 9 G 0 0 0
1
6
3
0
3
13
8
1
1
4
6
4
1
3
4
6
H
7
-
-
O
3
C
,
0
0
L
D
X
2
N
L
0
O
A
2
8
B
L
-
-
E
D
.
V
0
T
0
O
E
3
.
L
0
M
P
C
3
8
m
s
t
o
c
c
.
u
d
o
r
p
d
t
m
w
.
w
w
Figure 1
Indicates Model Series 600
Figure 2
FastAttach™ Twin Bag
Grass Collector
The Model OEM-190-182 Twin Bag Grass Collector is a
grass collection system designed for use on all MTD 46”
cut FastAttach™ compatible lawn tractors (except 2001
MTD/Yard-Man Revolution).
The instructions in this manual are divided into sections.
Carefully read all sections and study the illustrations to
ensure proper installation and usage of this attachment.
Read and observe all WARNING and CAUTION statements. They are included to provide for the protection
of the equipment installer and user, and to ensure the
prolonged service life of the equipment.
NOTE: References to LEFT and RIGHT indicate the left
and right sides of the tractor when facing forward in the
operator’s position. Reference to the FRONT indicates
the grille end; to the REAR, the rear end of the tractor.
Determine The Model
of Your Rider
Since this manual is designed for installation of your new
bagger on several different rider units, it is important
for you to determine which model of rider you have.
Therefore you will know which set of instructions in the
following pages to follow.
To determine which model of rider you have, you will
need to locate the rider’s model plate, located under the
seat. Simply flip the seat up and locate the model plate,
which will consist of an 11 digit/letter model number
and a serial number. For ease in this installation and
for future use, copy your rider’s model number & serial
number below now:
1
Rider Model
Identification
NOTE: References to
LEFT and RIGHT indicate
the left and right sides of
the tractor when facing
forward in the operator’s
position. Reference to the
FRONT indicates the grille
end; to the REAR, the reare
end of the tractor.
Rider Model Number:__ __ __ __ __ __ __ __ __ __ __
Rider Serial Number:_________ ________________
th
The 5
, 6th & 7th numbers from the left in your model
number determine your rider’s model series. See Figure
2.
When you fill in your model number in the space above,
the actual model series number should fall into the gray
shaded area.
Now that you have determined what model rider you are
attaching this grass bag collection system to, follow the
instructions on the following pages according to your
model of rider.
3
2
Carton
Contents
If you are missing
any parts, please
do not contact the
retailer where you
purchased this unit,
call MTD directly at
1-330-220-4MTD or
toll free at
1-800-800-7310.
CONTENTS OF CARTON
Before beginning installation, remove all parts from the carton to make sure everything is present. Carton
contents are listed below and shown in Figure 1. Hardware part numbers are shown in parentheses.
One Chute Tube
One Discharge Chute Assembly
Two Grass Bag Assemblies
One Support Tube
One Grass Catcher Cover Assembly
One Mounting Bracket
Three Blades
Figure 3
4
CONTENTS OF HARDWARE PACK
This grass collector kit is shipped with a hardware pack enclosed. This hardware pack may contain extra
parts for installation on a different rider from which you have. Please check your hardware pack against the
illustration below in accordance with your model of rider as determined in Section 1 of this manual.
2
For all model series 820 through 849 tractors
(2)
(2)
A
(2)
B
For all model series 650 through 699 tractors
(2)
A
(2)
B
For decks with grass catcher pin
not pre-installed
(1)
G
(1)
H
C
(4)
D
(2)
Carton
Contents
(2)
F3
C
(1)(1)
F2 F1
(LH) (RH)
For older tractors only
(1)
E
If you are missing
any parts, please
do not contact the
retailer where you
purchased this unit,
call MTD directly at
1-330-220-4MTD or
toll free at
1-800-800-7310.
NOTE:
has been identified
in above for ease of
assembly, and the
letter code assigned
here is maintained
in assembly instructions.
Each item
Figure 4
NOTE: Each item has been identified in above for ease of assembly, and the letter code assigned here is maintained
in assembly instructions.
RH = Right Hand (#) = Quantity
LH = Left Hand
5
RH = Right Hand
LH = Left Hand
Loading...