Toro OEM-190-180 Operator's Manual
Form No. 3357-362 Rev. A
To The Owner • Carton Contents • Assembly • Parts Lists • Warranty
OPERATOR’S MANUAL
Twin Rear Bagger Kit
For FastAttach™ Lawn Tractors
with 38” & 42” Decks
READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION
PRINTED IN U.S.A.
Models OEM-190-180
IMPORTANT
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
FORM NO. 770-10253F
03/2005
This Operator’s Manual is an important part of your new grass collector. It will help you assemble,
prepare and maintain the unit for best performance. Please read and understand what it says.
TABLE OF CONTENTS
1. Rider Identification ........................................... Page 3
2. Carton Contents .............................................. Page 4
3. Bracket Assembly ............................................ Page 6
4. Attach Grass Bags ........................................... Page 9
5. Attach Discharge Chute ................................... Page 10
6. Parts List .........................................................Page 12
7. Notes ...............................................................Page 14
Warranty .......................................................... Page 16
Finding and Recording Model Number
BEFORE YOU START ASSEMBLING YOUR NEW EQUIPMENT,
please locate the model plate and copy the information from it in this Operator’s Manual for future reference. The information on
the model plate is very important if you need help from our Customer Support Department or your authorized dealer.
You can locate it by looking on the front, left portion of the plastic grass catcher cover as seen below:
Model Number Serial Number
*Locate the model plate on your bagger and copy the information from it in the space provided above for future reference.
Customer Support
Please do
purchased, without first contacting Customer Support.
If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this
unit, you can seek help from the experts. Choose from the options below:
• Visit www.mtdproducts.com. Click on the Service & Support menu option.
• Phone a Customer Support Representative at 1-800-800-7310.
• Please have your unit’s model number and serial number ready when you call. See above to locate this information. You will
be asked to enter the serial number in order to process your call.
NOT
return the unit to the retailer from which it was
2
Model Plate
Figure 1
Sample Model Number
1 3 A M
7 9 0
Indicates Model Series 700
Figure 2
G 0 0 0
FastAttach™ Twin Bag
Grass Collector
The Model OEM-190-180 Twin Bag Grass Collector is a
grass collection system designed for use on all MTD 38”
1
6
3
0
3
13
8
1
1
4
6
4
1
3
4
6
H
7
-
-
O
3
C
,
0
0
L
D
X
2
N
L
0
O
A
2
8
B
L
-
-
E
D
.
V
0
T
0
O
E
3
.
L
0
M
P
C
3
8
m
s
t
o
c
c
.
u
d
o
r
p
d
t
m
w
.
w
w
& 42” cut FastAttach™ compatible lawn tractors (except
2001 MTD/Yard-Man Revolution).
The instructions in this manual are divided into sections.
Carefully read all sections pertaining to your model of
Rider Model
Identification
rider, and study the illustrations to ensure proper installation and usage of this attachment. Read and observe all
WARNING, NOTES and IMPORTANT statements. They
are included to provide for the protection of the equipment installer and user, and to ensure the prolonged
service life of the equipment.
NOTE: References to LEFT and RIGHT indicate the left
and right sides of the tractor when facing forward in the
operator’s position. Reference to the FRONT indicates
the grille end; to the REAR, the rear end of the rider.
Determine The Model
of Your Rider
Since this manual is designed for installation of your new
bagger on several different rider units, it is important
for you to determine which model of rider you have.
Therefore you will know which set of instructions in the
following pages to follow.
To determine which model of rider you have, you will
need to locate the rider’s model plate, located under the
seat. Simply flip the seat up and locate the model plate,
which will consist of an 11 digit/letter model number
and a serial number. For ease in this installation and
for future use, copy your rider’s model number & serial
number below now:
1
NOTE:
References to LEFT
and RIGHT indicate the
left and right sides of
the tractor when facing
forward in the operator’s
position. Reference to
the FRONT indicates the
grille end; to the REAR,
the rear end of the rider.
Rider Model Number:__ __ __ __ __ __ __ __ __ __ __
Rider Serial Number:_________ ________________
th
The 5
, 6th & 7th numbers from the left in your model
number determine your rider’s model series. See Figure
2.
When you fill in your model number in the space above,
the actual model series number should fall into the gray
shaded area.
Now that you have determined what model rider you are
attaching this grass bag collection system to, follow the
instructions on the following pages according to your
model of rider.
3
2
Carton
Contents
CONTENTS OF CARTON
Before beginning installation, remove all parts from the carton to make sure everything is present. Carton
contents are listed below and shown in Figure 3. Hardware part numbers are shown in parentheses.
One Chute Tube
One Discharge Chute Assembly
Two Grass Bag Assemblies
One Support Tube
One Grass Catcher Cover Assembly
One Mounting Bracket
If you are missing
any parts, please
do not contact the
retailer where you
purchased this unit,
call MTD directly at
1-330-220-4MTD or
toll free at
1-800-800-7310.
Grass Catcher Cover
Assembly
Chute Tube
Discharge Chute
Assembly
Support Tube
Grass Bag Assemblies
Mounting Bracket
Figure 3
4
CONTENTS OF HARDWARE PACK
This grass collector kit is shipped with a hardware pack enclosed. This hardware pack may contain extra
parts for installation on a different rider from which you have. Please check your hardware pack against the
illustration below in accordance with your model of rider as determined in Section 1 of this manual.
2
Carton
For all Model Series 650 through 699 tractors
(2)
A
(2)
B
For all Model Series 700 tractors
(2)
A
(2)
B
For older tractors only
(2)
(2)
(4)
(1)
E
Contents
C
F2 F1
(LH) (RH)
C
D
For decks with grass catcher pin
not pre-installed
F2 F1
(LH) (RH)
(1)
G
(1)
H
(1)(1)
If you are missing
any parts, please
do not contact the
retailer where you
purchased this unit,
call MTD directly at
(1)(1)
1-330-220-4MTD or
toll free at
1-800-800-7310.
NOTE:
has been identified
in above for ease of
assembly, and the
letter code assigned
here is maintained
in assembly instructions.
RH = Right Hand
LH = Left Hand
(#) = Quantity
Each item
Figure 4
NOTE: Each item has been identified in above for ease of assembly, and the letter code assigned here is maintained
in assembly instructions.
RH = Right Hand (#) = Quantity
LH = Left Hand
5
Loading...