V series
Low Voltage
Base Type : GU5.3
Input Voltage : 12V AC
LED Source : Orsam / Epistar / Nichia
Beam Angle :
Total Power Consumption :
Smart device requirement :
To make sure the APP to operate smoothly,
it is recommended to use with iPhone 4S
and iPad mini and up.
APP operating system :
iOS : iOS 9.0 and above、Bluetooth version
4.0 and above.
Android : Android 4.4.4 and above、
Bluetooth version 4.0 and above.
40°
5W±10%
Safety & Environment Specications
V series - Bluetooth MR16 RGBW are manufactured to conform to the following safety approbation.
Certificated Mark
Certificate Approval
Certificate Approval :●: Completed : In Progress
EMC LVD ErP
REACH
1Rev:01 2017 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.tw
Specification
Part Number LED Source Input Voltage Color
MR16
MR16
MR16
MR16
Option 1 : Lamp base : GU5.3
Option 2 : Input Voltage : 12V AC
Epistar
Orsam
Epistar
Orsam
Epistar
Orsam
Epistar
Epistar
Orsam
Epistar
12V 3000K 80 NA
12V
12V
12V
C.R.I.
Lightwave (nm) Beam Angle(°)
(RA)
Single Color
27
40
60
120
Wram Whitle / Cool White
3000K
6500K 951 446
3000K 80 NA
Red
Green 553 40
Blue 468 10
3000K
6500K 950 381
Red
Green 533 38
Blue 470 11
80 NA
R / G / B / Wram Whitle
600
NA
R / G / B / Wram Whitle / Cool White
80 NA
605
NA
27
40
60
120
27
40
60
120
27
40
60
120
CBCP
Candela
1215 5 485
1120
Total Pow.
(cd)
906
NA
905
NA
+/-10%
5
5
5
Typical Lumens
（lm）
436
410
375
20
15
Dimming
APP
Dimming
APP
Dimming
APP
Dimming
APP
Dimming
Power Factor
(PF)
>0.7
>0.7
>0.7
>0.7
Overview of APP
Device Connection
Step 1 : Download APP based on your operating system
Step 2 : Turn on Bluetooth
Step 3 : Startup app. Enter password,the default password is 1234
(4 digits only)
Step 4 : Click to Add devices
Step 5 : Choose the device,and click OK.
Step 6 : Click < back to the device list.
Step 3 Step 4 Step 5 Step 6
Rev:01 2017 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.tw
2
Overview of APP
Device Control
Click the icon - device will be ON/OFF
Long press the icon to popup interface of control settingStep.
Delete : After light blinks 3 times, reset successful.
Color Temperature Control.
Color Control.
Control Temperature / color / RGB Scenes / Nightlight.
Device Setting
Long press the icon to popup interface of control setting.
Edit setting : Rename / Group Setting.
Rename—click to edit.
3Rev:01 2017 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.tw
Overview of APP
Group Control
Step 1
Step 2
Add : Add group.
Edit : Delete group.
Step 3 Step 4
Edit group name :
click name to rename.
Step 5
Choose devices you
want to add in the
Living Room for group
adding.
Step 6
Control power.
Control all devices of group.
4Rev:01 2017 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.tw
2D Drawing
Product Packing Bluetooth MR16 RGBW
Step 1 Step 2 Step 3
Gife Box/ White Box 1Pc of Lamp Inner Carton 100 Boxes Outer Carton 2 Inner Cartons (200 White Boxes)
Dimensions(mm) L:53*W:53*H:83 Dimensions(mm) L:285*W:285*H:385 Dimensions(mm) L:590*W:304*H:400
Lamp body material
COVER : PC
PLASTIC HOUSING : PC
BASE : NPB
Dimension (mm) - Ø : 50
Net Weight (g)
Ø:50
50
Base GU5.3
Net Weight (g)
Luminaire Notice
The LED Lamp is not compatible with all luminaires
for halogen lamps. Before installation, please read
following guidelines:
-No sealed fixtures.
-Not for outdoor fixtures.
-Not for wet environment.
Rev:01 2017 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.tw
No sealed fixtures
Not for outdoor fixtures
5
Safety Label & Warning
• Do not cover lamp with paper, fabric, or any ammable material to avoid burning.
• Working Environmental Temperature: -20 ~ +40°
• Do not insert metal objects into the gap of lamp base.
• The appropriate combination of lamp and lamp base should be carefully selected for dierent voltage and wattage.
• Do not use in high-humidity environment or near water to avoid damage. (Except B.L.T.C. Outdoor IP65 version)
• Not suitable for use in automatic light sensor system, emergency lighting fixture and mercury fixture to avoid damage and
burning.
• Do not use near ammable objects such as gasoline, spray, chemicals, paints, oil…etc.
• Do not use in place that is likely to be impacted by force or vibration.
• Do not use in acidic environment.
• Please turn the light o when installing or cleaning to avoid electrical shock.
• Please handle with care to avoid damage and collision.
• Do not touch any powered-on lamps or lamps that have just been turned o to avoid burning.
• Please ensure the lamp is tightly installed into the socket to avoid dropping.
• Please select the appropriate xture based on lamp size and weight.
General Guideline
• Slight dierence of color temperature and brightness is likely to occur for the same part number due to the dierence of LED
chips.
• Brightness, color temperature, and light distribution may vary with dierent types of bulbs.
• To avoid heat build-up and the shortening of product lifetime, sealed xture is not recommended.
• Keep the lamp away from radio, video and television for a distance of 1 meter to avoid noise caused by interference.
• Do not install lamp in heal insulated xture.
• Do not disassemble or reconstruct the lamp.
• Do not stare directly at the lamp to avoid eye injury.
• The light distribution may vary with dierent type of xtures.
• Do not wash the lamp with water.
• Do not use the lamp outdoor if it is not marked as IP65.
• To avoid damage and poor insulation, do not use the lamp near water or in frosted environment if it is not marked as IP65.
• For lamps with a weight signicantly higher than that of the lamps for which they are a replacement, attention should be drawn
to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair
contact making and lamp retention.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Rev:01 2017 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.tw
6
Loading...