Toro INFINITY 34, INFINITY 54 Sell Sheet

INFINITY™ 34/54

SERIES ROTORS

The New INFINITY 34/54 is Toro’s Premium full-circle golf sprinkler series with SMART ACCESS®. The dual
trajectory main nozzle provides exceptional nozzle performance at the 25° standard angle position and great
performance in windy applications at the 15° low angle position. And the consistency of the constant velocity
full circle drive ensures even water application across the coverage area every time you water.

Features & Benefits

Industry’s Largest Nozzle Selection

Nozzles from 52’ to 100’. Color coded for easy flow
and radius identification and threaded from the front to
simplify servicing.

Five Activation types

- Standard solenoid

- Spike Guard™ solenoid

- Nickel plated Spike Guard solenoid

- DC Latching solenoid (DCLS)

- Integrated GDC module w/ DCLS

- Available on all INFINITY models!

Constant Velocity Full Circle Drive

Ensures consistent rotation speeds when matched with
station run times for even water application across the
coverage area every time you water.

Radius Reduction Screw for Fine Tuning

In combination with main nozzle sizing and trajectory
adjustment the radius reduction screw can effectively
reduce the sprinkler throw down to 30’.

SMART ACCESS

Provides top accessibility to all critical components.

• No digging or unsightly turf repair scars

• No buried wire splices or ground faults

• Pilot valve removable with water “ON”

• Lower long term cost of ownership

• Customizable marker

• Replaceable cover if damaged

• Increased labor efficiency

INF34 Series Performance Chart—25°

Nozzle Set 31

Nozzle Set 32

INFINITY™ 34/54 SERIES ROTORS

Nozzle Set 33

Nozzle Set 34

Nozzle Set 35

Nozzle Set 36

Nozzle Set 37

Front

Nozzle

Positions

Back

Nozzle

Positions

PSI Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM
50 57 13.0 58 15.5 64 21.9 68 24.4 — — — — — —
65 58 14.6 60 18.0 68 24.4 72 28.1 76 32.2 — — — —
80 60 16.2 63 20.5 72 26.9 76 31.1 80 35.6 83 38.2 85 41.5

100 62 17.9 66 23.4 75 29.8 79 34.9 84 49.3 88 43.4 91 46.9

(Yellow)

102-0725 102-7001 102-0727 102-7002 102-6908 102-0730 102-4261

Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Brown

102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-6883

Yellow Blue Yellow Orange Yellow Red Yellow Beige Yellow Beige Yellow Red Yellow Gray

102-6937 102-2925 102-6937 102-2926 102-6937 102-2928 102-6937 102-2929 102-6937 102-2929 102-6937 102-6944 102-6937 102-6945

(Blue)

(Brown)

(Orange)

(Green)

(Gray)

INF34 Series Performance Chart—15°

PSI Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM
50 52 12.9 53 15.6 60 21.7 62 25.5 — — — — — —
65 53 14.4 54 17.1 61 24.2 64 28.0 67 32.1 — — — —
80 56 16.0 57 19.0 65 26.6 69 31.0 73 35.5 76 38.0 77 41.3

100 57 17.5 59 20.5 67 29.5 71 33.9 75 38.4 80 43.1 81 46.8

Stator 102-6929 Blue 102-1940 White

Conversions INF34-3134 INF34-3537

■

Toro recommends the use of a 11⁄4" swing joint at flows over 25-GPM (95-LPM).

Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.

All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.

Actual site conditions must be considered when selecting the appropriate nozzle.

Not recommended at these pressures. Radius shown in feet.

(Black)

INF34 Nozzle Apex

Pressure Nozzle Apex at 15˚ Apex at 25°

31 6’ @ 51’ 13’ @ 54’

32 6’ @ 51’ 11’ @ 64’

65 PSI

33 7’ @ 59’ 13’ @ 68’

34 8’ @ 63’ 15’ @ 74’

35 9’ @ 66’ 15’ @ 76’

80 PSI

36 8’ @ 75’ 18’ @ 83’

37 9’ @ 74’ 19’ @ 82’