FLEX800™ 35/55 SERIES
GOLF ROTORS
The New FLEX800 35/55 Series features a dual trajectory main nozzle that provides exceptional nozzle
performance at the 25° standard angle position and great performance in windy applications at the 15° low
angle position. And the part/full circle drive allows you to adjust the area of coverage to match your seasonal
watering needs or meet water rationing mandates in seconds with no additional parts required.
Features & Benefits
Industry’s Largest Nozzle Selection
Nozzles from 43’ to 92’ radius plus a wide assortment
of back nozzles lets you put the precise amount of water
exactly where you need it. All nozzles threaded in from front.
Stainless Steel Valve Seat
Eliminates body damage from rocks and debris. This
in-destructible stainless steel seat is molded to the
body and virtually eliminates body replacements due
to seat damage.
Optional Radius Reduction Screw
Allows for fine tuning the radius to exactly the distance
you need. In combination with main nozzle sizing and
trajectory adjustment the radius reduction screw can
effectively reduce the sprinkler throw down to 30’.
True Part and Full-Circle in One – (40° - 330° part circle)
These sprinklers can be full circle today and part
circle tomorrow allowing you to adjust the area of
coverage to match your seasonal needs or meet
water rationing mandates.
FLX35
25°
OR
15°
Dual Trajectory
The 25° setting provides
maximum distance of
throw and the 15° setting
provides improved wind
performance, radius
reduction and obstacle
avoidance.
FLX55
FLEX800™ 35/55 SERIES GOLF ROTORS
FLX35 Series Performance Chart—25°
Nozzle Set 30
Nozzle Set 31
Nozzle Set 32
Nozzle Set 33
Nozzle Set 34
Nozzle Set 35
Nozzle Set 36
Nozzle Set 37
Front
Nozzle
Positions
Back
Nozzle
Positions
(White Plug)
102-2208 102-6906 102-0726 102-6907 102-0728 102-6955 102-6935 102-6936
Yellow Biege Yellow Brown Yellow Yellow Yellow Yellow Yellow Yellow Yellow Green Green Green Green Green
102-5670 102-6942 102-5670 102-5671 102-5670 102-6884 102-5670 102-6884 102-5670 102-6884 102-5670 102-6885 102-6531 102-6885 102-6531 102-6885
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335
PSI Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM
50 43 8.2 53 13.8 56 18.3 61 21.7 65 25.3 — — — — — —
65 45 10.0 53 15.5 59 20.5 64 24.4 68 28.2 72 34.1 — — — —
80 46 11.5 57 17.3 62 22.7 67 27.1 71 31.1 75 37.8 78 40.3 80 44.0
100 47 13.4 59 19.1 65 24.9 70 29.8 74 34.1 79 40.9 81 43.8 83 47.3
(Yellow)
(Blue)
(Brown)
(Orange)
(Green)
(Gray)
(Black)
FLX35 Series Performance Chart—15°
PSI
Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM
50 43 8.2 52 13.6 58 18.1 61 21.5 62 25.6 — — — — — —
65 45 10.0 54 15.3 60 20.3 64 24.2 65 27.3 69 33.1 — — — —
80 46 11.5 58 17.2 64 22.6 69 26.8 69 30.2 75 36.8 76 39.7 76 42.9
100 47 13.4 60 19.0 66 24.7 71 29.5 72 32.9 78 39.5 82 42.6 82 46.1
Stator 102-6929 Blue 102-1939 Yellow 102-1940 White
Conversions FLX35-3134 FLX35-3537
■
Toro recommends the use of a 11⁄4" swing joint at flows over 25-GPM (95-LPM). Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 PSI.
Actual site conditions must be considered when selecting the appropriate nozzle.
Not recommended at these pressures. Radius shown in feet.
FLX35 Nozzle Apex
Pressure Nozzle Apex at 15˚ Apex at 25°
31 6’ @ 51’ 13’ @ 54’
32 6’ @ 51’ 11’ @ 64’
65 PSI
80 PSI
33 7’ @ 59’ 13’ @ 68’
34 8’ @ 63’ 15’ @ 74’
35 9’ @ 66’ 15’ @ 76’
36 8’ @ 75’ 18’ @ 83’
37 9’ @ 74’ 19’ @ 82’
FLX55 Series Performance Chart—25°
Nozzle Set 51
Nozzle Set 52
Nozzle Set 53
Nozzle Set 54
Nozzle Set 55
Nozzle Set 56
Nozzle Set 57
Nozzle Set 58
Nozzle Set 59
Front
Nozzle
Positions
Back
Nozzle
Positions
PSI Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM
50 55 14.1 57 18.5 62 22.3 66 25.8 — — — — — — — — — —
65 57 15.8 60 20.9 65 25.1 69 28.7 73 35.9 — — — — — — — —
80 59 17.5 61 23.1 68 27.8 72 31.7 76 39.7 80 43.1 83 48.2 85 50.0 89 57.5
100 61 19.3 63 25.3 71 30.3 75 34.5 80 43.5 83 49.0 88 51.5 90 53.9 92 61.3
(Yellow)
102-6906 102-0726 102-6907 102-0728 102-6955 102-6935 102-6936 102-6909 102-4259
Yellow Brown Yellow Yellow Yellow Yellow Yellow Yellow Yellow Green Green Green Green Green Green Green Green Green
102-5670 102-5671 102-5670 102-6884 102-5670 102-6884 102-5670 102-6884 102-5670 102-6885 102-6531 102-6885 102-6531 102-6885 102-6531 102-6885 102-6531 102-6885
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335
(Blue)
(Brown)
(Orange)
(Green)
(Gray)
(Black)
(Red)
(Beige)
FLX55 Series Performance Chart—15°
PSI
Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM
50 55 14.0 59 16.5 62 22.2 63 25.6 — — — — — — — — — —
65 56 15.6 62 20.7 65 25.0 66 28.5 75 35.3 — — — — — — — —
80 59 17.4 66 23.0 69 27.7 70 31.5 78 39.0 78 42.4 79 46.9 79 49.5 82 57.2
100 60 19.2 68 25.1 71 30.2 72 34.3 80 41.9 81 47.2 83 52.1 83 53.4 85 60.8
Stator 102-1939 Yellow 102-1940 White
Conver-
sions
Toro recommends the use of a 11⁄4" swing joint at flows over 25-GPM (95-LPM). Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
FLX55-5154 FLX55-5558
■
Not recommended at these pressures. Radius shown in feet.
All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 PSI.
Actual site conditions must be considered when selecting the appropriate nozzle.
102-1941 White
FLX55-59
FLX55 Nozzle Apex
Pressure Nozzle Apex at 15˚ Apex at 25°
51 6’ @ 51’ 13’ @ 54’
52 6’ @ 51’ 11’ @ 64’
65 PSI
80 PSI
53 7’ @ 59’ 13’ @ 68’
54 8’ @ 63’ 15’ @ 74’
55 9’ @ 66’ 15’ @ 76’
56 8’ @ 75’ 18’ @ 83’
57 9’ @ 74’ 19’ @ 82’
58 10’ @ 82’ 18’ @ 87’
59 11’ @ 81’ 21’ @ 91’
FLEX800™ 35/55 SERIES GOLF ROTORS
Main Nozzle Adapter Performance Charts
Intermediate Nozzle Performance Charts
102-2929
Beige
Pressure Flow Radius Radius Radius Radius Radius Radius
PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters
50 3.4 8.1 30.7 53 17.4 52 17.1 50 16.4 48 15.7 45 14.8 42 13.8
60 4.1 8.9 33.7 57 18.7 56 18.4 53 17.4 51 16.7 47 15.4 45 14.8
65 4.5 9.3 35.2 58 19.0 56 18.4 54 17.7 51 16.7 49 16.1 46 15.1
70 4.8 9.6 36.3 59 19.4 57 18.7 56 18.4 53 17.4 50 16.4 48 15.7
80 5.5 10.3 39.0 61 20.0 60 19.7 58 19.0 56 18.4 53 17.4 50 16.4
90 6.2 10.9 41.3 63 20.7 61 20.0 59 19.4 57 18.7 54 17.7 51 16.7
100 6.9 11.5 43.5 65 21.3 63 20.7 60 19.7 58 19.0 55 18.0 51 16.7
Trajectory 30° 25° 20° 15° 10° 7°
102-2928
Red
Pressure Flow Radius Radius Radius Radius Radius Radius
PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters
50 3.4 6.3 23.8 53 17.4 51 16.7 48 15.7 46 15.1 43 14.1 40 13.1
60 4.1 7.0 26.5 55 18.0 53 17.4 50 16.4 48 15.7 45 14.8 42 13.8
65 4.5 7.2 27.3 56 18.4 54 17.7 52 17.1 49 16.1 47 15.4 44 14.4
70 4.8 7.5 28.4 57 18.7 55 18.0 53 17.4 51 16.7 49 16.1 46 15.1
80 5.5 8.0 30.3 59 19.4 58 19.0 56 18.4 54 17.7 52 17.1 49 16.1
90 6.2 8.5 32.2 60 19.7 58 19.0 57 18.7 55 18.0 53 17.4 50 16.4
100 6.9 9.0 34.1 61 20.0 59 19.4 57 18.7 55 18.0 53 17.4 50 16.4
102-2927
Gray
Pressure Flow Radius Radius Radius Radius Radius Radius
PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters
50 3.4 5.0 18.9 50 16.4 48 15.7 46 15.1 44 14.4 41 13.5 38 12.5
60 4.1 5.5 20.8 52 17.1 50 16.4 48 15.7 46 15.1 43 14.1 40 13.1
65 4.5 5.7 21.6 53 17.4 51 16.7 49 16.1 46 15.1 44 14.4 41 13.5
70 4.8 5.9 22.3 53 17.4 51 16.7 49 16.1 47 15.4 45 14.8 42 13.8
80 5.5 6.3 23.8 54 17.7 52 17.1 50 16.4 48 15.7 46 15.1 43 14.1
90 6.2 6.7 25.4 55 18.0 53 17.4 52 17.1 50 16.4 48 15.7 45 14.8
100 6.9 7.1 26.9 55 18.0 54 17.7 53 17.4 52 17.1 50 16.4 46 15.1
102-2926
Orange
Pressure Flow Radius Radius Radius Radius Radius Radius
PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters
50 3.4 4.3 16.3 48 15.7 46 15.1 44 14.4 42 13.8 39 12.8 35 11.5
60 4.1 4.7 17.8 50 16.4 48 15.7 46 15.1 44 14.4 41 13.5 38 12.5
65 4.5 4.9 18.5 51 16.7 49 16.1 47 15.4 45 14.8 42 13.8 39 12.8
70 4.8 5.1 19.3 51 16.7 50 16.4 48 15.7 46 15.1 43 14.1 40 13.1
80 5.5 5.4 20.4 52 17.1 51 16.7 50 16.4 48 15.7 45 14.8 42 13.8
90 6.2 5.8 22.0 53 17.4 52 17.1 51 16.7 49 16.1 47 15.4 44 14.4
100 6.9 6.1 23.1 54 17.7 53 17.4 52 17.1 50 16.4 48 15.7 45 14.8
Trajectory 30° 25° 20° 15° 10° 7°
Trajectory 30° 25° 20° 15° 10° 7°
Trajectory 30° 25° 20° 15° 10° 7°
102-2925
Blue
Pressure Flow Radius Radius Radius Radius Radius Radius
PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters
50 3.4 2.7 10.2 42 13.8 41 13.5 39 12.8 38 12.5 36 11.8 34 11.2
60 4.1 3.0 11.4 43 14.1 42 13.8 40 13.1 39 12.8 37 12.1 35 11.5
65 4.5 3.2 12.1 43 14.1 42 13.8 40 13.1 39 12.8 37 12.1 35 11.5
70 4.8 3.3 12.5 44 14.4 42 13.8 41 13.5 39 12.8 38 12.5 36 11.8
80 5.5 3.5 13.2 44 14.4 43 14.1 41 13.5 40 13.1 38 12.5 36 11.8
90 6.2 3.7 14.0 45 14.8 44 14.4 42 13.8 41 13.5 39 12.8 37 12.1
100 6.9 3.9 14.8 45 14.8 44 14.4 43 14.1 42 13.8 40 13.1 38 12.5
Trajectory 30° 25° 20° 15° 10° 7°
Main Nozzle Adapter Performance Charts
Intermediate Nozzle Performance Charts
102-6885
Green
Pressure Flow Radius Radius Radius Radius Radius Radius
PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters
50 3.4 5.4 20.4 51 16.7 50 16.4 48 15.7 45 14.8 42 13.8 39 12.8
60 4.1 5.9 22.3 52 17.1 51 16.7 49 16.1 46 15.1 43 14.1 41 13.5
65 4.5 6.1 23.1 52 17.1 51 16.7 50 16.4 47 15.4 44 14.4 42 13.8
70 4.8 6.3 23.8 53 17.4 52 17.1 50 16.4 47 15.4 44 14.4 42 13.8
80 5.5 6.7 25.4 53 17.4 52 17.1 51 16.7 48 15.7 45 14.8 43 14.1
90 6.2 7.1 26.9 54 17.7 53 17.4 52 17.1 50 16.4 47 15.4 45 14.8
100 6.9 7.4 28.0 55 18.0 55 18.0 54 17.7 52 17.1 49 16.1 47 15.4
Trajectory 30° 25° 20° 15° 10° 7°
102-6884
Yellow
Pressure Flow Radius Radius Radius Radius Radius Radius
PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters
50 3.4 4.1 15.5 48 15.7 47 15.4 45 14.8 41 13.5 38 12.5 35 11.5
60 4.1 4.5 17.0 49 16.1 48 15.7 47 15.4 44 14.4 41 13.5 38 12.5
65 4.5 4.7 17.8 50 16.4 49 16.1 48 15.7 45 14.8 42 13.8 39 12.8
70 4.8 4.8 18.2 50 16.4 49 16.1 48 15.7 45 14.8 43 14.1 40 13.1
80 5.5 5.1 19.3 51 16.7 50 16.4 49 16.1 47 15.4 44 14.4 41 13.5
90 6.2 5.4 20.4 53 17.4 52 17.1 50 16.4 48 15.7 45 14.8 42 13.8
100 6.9 5.8 22.0 54 17.7 53 17.4 51 16.7 49 16.1 46 15.1 43 14.1
102-6883
Brown
Pressure Flow Radius Radius Radius Radius Radius Radius
PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters
50 3.4 2.4 9.1 41 13.5 40 13.1 38 12.5 36 11.8 33 10.8 30 9.8
60 4.1 2.6 9.8 43 14.1 42 13.8 40 13.1 38 12.5 36 11.8 33 10.8
65 4.5 2.7 10.2 44 14.4 42 13.8 41 13.5 39 12.8 37 12.1 34 11.2
70 4.8 2.8 10.6 45 14.8 43 14.1 42 13.8 40 13.1 38 12.5 35 11.5
80 5.5 3.0 11.4 46 15.1 45 14.8 43 14.1 41 13.5 40 13.1 36 11.8
90 6.2 3.2 12.1 46 15.1 45 14.8 44 14.4 42 13.8 41 13.5 37 12.1
100 6.9 3.4 12.9 46 15.1 45 14.8 44 14.4 43 14.1 41 13.5 38 12.5
Trajectory 30° 25° 20° 15° 10° 7°
Trajectory 30° 25° 20° 15° 10° 7°
Inner Nozzle Performance Charts*
102-6937
Yellow
Pressure Flow Radius Radius Radius
PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters
50 3.4 3.7 14.0 26 8.5 24 7.9 20 6.6
60 4.1 4.0 15.1 28 9.2 25 8.2 22 7.2
65 4.5 4.2 15.9 28 9.2 25 8.2 22 7.2
70 4.8 4.4 16.7 28 9.2 26 8.5 23 7.5
80 5.5 4.7 17.8 28 9.2 26 8.5 24 7.9
90 6.2 5.0 18.9 29 9.5 27 8.9 25 8.2
100 6.9 5.2 19.7 30 9.8 29 9.5 27 8.9
Trajectory 30° 25° 20°
Main Nozzle Adaptor
P/N 118-1521
102-6531
Green
Pressure Flow Radius Radius Radius
PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters
50 3.4 4.0 15.1 32 10.5 30 9.8 26 8.5
60 4.1 4.3 16.3 34 11.2 31 10.2 27 8.9
65 4.5 4.5 17.0 34 11.2 31 10.2 27 8.9
70 4.8 4.7 17.8 34 11.2 31 10.2 28 9.2
80 5.5 5.0 18.9 34 11.2 32 10.5 29 9.5
90 6.2 5.3 20.1 34 11.2 32 10.5 29 9.5
100 6.9 5.6 21.2 35 11.5 33 10.8 30 9.8
Trajectory 30° 25° 20°
* Not recommended below 20°
FLEX800™ 35/55 SERIES GOLF ROTORS
Operating Specifications
FLX35 Conversion Upgrades
Models Description
• FLX35-3134
FLX35 w/31–34 Nozzles
(#3 Nozzle Installed)
• FLX35-3537
FLX35 w/35–37 Nozzles
(#5 Nozzle Installed)
• FLX35-3134E
FLX35 w/31–34 Nozzles
(#3 Nozzle Installed), Effluent
• FLX35-3537E
FLX35 w/35–37 Nozzles
(#5 Nozzle Installed), Effluent
FLX55 Conversion Upgrades (Ribbed Body)
Models Description
• FLX55-5154
• FLX55-5558
• FLX55-59
• FLX55-5154E
• FLX55-5558E
FLX55 w/51–54 Nozzles
(#3 Nozzle Installed)
FLX55 w/55–58 Nozzles
(#5 Nozzle Installed)
FLX55 w/59 Nozzle
FLX55 w/51–54 Nozzles
(#3 Nozzle Installed), Effluent
FLX55 w/55–58 Nozzles
(#5 Nozzle Installed), Effluent
• FLX55-59E
• 102-5011
FLX55 w/59 Nozzle, Effluent
690 Adapter
allows you to upgrade
any 690 with FLX55
conversions
FLX55 Conversion Upgrades (Ribless Body)
Models Description
• FLX55-5154R
• FLX55-5558R
• FLX55-59R
• FLX55-5154RE
• FLX55-5558RE
FLX55 w/51–54 Nozzles
(#3 Nozzle Installed)
FLX55 w/55–58 Nozzles
(#5 Nozzle Installed)
FLX55 w/59 Nozzle
FLX55 w/51–54 Nozzles
(#3 Nozzle Installed), Effluent
FLX55 w/55–58 Nozzles
(#5 Nozzle Installed), Effluent
• FLX55-59RE
FLX55 w/59 Nozzle, Effluent
• Inlet:
- FLX35: 1” ACME
- FLX55: 1½” ACME
• Radius:
- FLX35: 43’ – 83’
- FLX55: 55’ – 92’
• Flow Rate:
- FLX35: 8.2 – 47.3 GPM
- FLX55: 14.1 – 61.3 GPM
• Precipitation Rates:
- FLX35: Minimum - .41”/hr; Maximum - .45”/hr
- FLX55: Minimum - .46”/hr; Maximum - .58”/hr
• Pilot Valve: Selectable at 50, 65, 80 and 100 PSI
• Recommended Operating Pressure Range: 65-100 PSI
(maximum – 150 PSI and minimum – 40 PSI)
• Activation types – Electric Valve-in-Head:
- Standard Solenoid:
n24 VAC, 50/60 Hz
nInrush: 0.30 A
nHolding 0.20 A
- Spike Guard Solenoid:
n24 VAC, 50/60 Hz
nInrush: 0.12 A
nHolding 0.10 A
- Nickel-Plated Spike Guard Solenoid:
n24 VAC, 50/60 Hz
nInrush: 0.12 A
nHolding 0.10 A
- DC Latching Solenoid (DCLS):
nMomentary low voltage pulse
- Integrated GDC Module w/DCLS:
nMomentary low voltage pulse
Additional Features
• FLX35 has eight nozzle
variations (30, 31, 32, 33,
34, 35, 36 & 37)
• FLX55 has nine nozzle
variat ion s (51, 52, 53, 54,
55, 56, 57, 58 & 59)
• Three in-line nozzles,
rotating stream pattern
• Two back nozzle positions
• Stator variations: 3
• Radius reduction screw
363-4839 for fine tuning
•
Ratcheting riser
•
Nozzle base clutching
Dimensions
• Body Flange Diameter:
- FLX35-6: 61/2”
- FLX55-6: 71/2”
• Body height:
- FLX35: 10”
- FLX55: 113/8”
• Weight:
- FLX35-6: 2.89 lbs.
- FLX55-6: 3.57 lbs.
• Weight–Integrated GDC
- FLX35: 3.58 lbs.
- FLX55: 4.26 lbs.
•
Pop-up height to nozzle: 3¼”
Warranty
• Three years
• Five years when installed with Toro Swing Joints
Specifying Information—FLX35 & FLX55
FLXX5-XXX-X-7
Body
Inlet
FLXX 5 X X X X 7
3—1"
5—11⁄2"
Example: When specifying an FLX35 Series Sprinkler with #34 nozzle, pressure regulation at 65 PSI and Spike Guard you would specify: FLX35–346–2
Note: Not all models available. * All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 PSI.
www.toro.com / e Toro Company, Irrigation Division / 5825 Jasmine Street, Riverside, CA 92504 / 877-345-8676 / Specications subject to change without notice / © 2015. All rights reserved / P/N 15-5059-IG
Arc Nozzle
5—Part-circle and
Full-circle
In One
FLX35—30, 31, 32, 33 , 34, 35, 36, 37
FLX55—51, 52, 53, 54, 55, 56, 57, 58, 59
Pressure
Regulation*
6—65 PSI
8—80 PSI
1—100 PSI
Activation Type Optional
1—Standard Solenoid
2—Spike Guard™ Solenoid
3—Nickel-plated Spike Guard Solenoid
4—DC Latching Solenoid (DCLS)
5—Integrated GDC Module w/DCLS
7—Effluent
Loading...