Toro FLEX800 35-6, FLEX800 55-6 Sell Sheet

FLEX800™ 35-6/55-6 SERIES

GOLF ROTORS

With the industry’s largest selection of high performance nozzles and Trujectory™ adjustment the New FLEX800
35-6/55-6 Series allows you to put water precisely where you want it for maximum distribution uniformity. And
the part/full circle drive allows you to simply and economically adjust the area of coverage to match your seasonal
watering needs or meet water rationing mandates in seconds with no disassembly or additional parts required.

Features & Benefits

Industry’s Largest Nozzle Selection

Nozzles from 42’ to 100’ radius plus a wide assortment
of back nozzles lets you put the precise amount of water
exactly where you need it. All nozzles threaded in from
the front.

20,000 Volt Lightning Rating

Spike-Guard™ solenoid virtually eliminates the need
for replacements in high lightning areas. Draws half
the amperage of traditional solenoids so you can run
twice as many sprinklers simultaneously, reduce the
cost of wire during initial installation or increase the
distance from controller to sprinkler.

30°

Adjustment With No Disassembly

Toro exclusive, simply pull up the riser and ratchet it
to the precise position you want to water.

True Part and Full-Circle in One – (40° - 330° part circle)

These sprinklers can be full circle today and part circle
tomorrow allowing you to simply and economically
adjust the area of coverage to match your seasonal
needs or meet water rationing mandates.

Trajectory – 24 Positions

From 7° - 30° in 1° increments
put water where you want

7°

it. Adjust from the top of the
sprinkler in seconds, wet or dry.
This flexibility lets you tackle every
obstacle on the course; wind,
trees, bunkers, mounds and more.

FLEX800™ 35-6/55-6 SERIES GOLF ROTORS

B

C

FLX35-6 Trajectory Performance

Nozzle/PSI/GPM #31 Nozzle @ 65 PSI, 15.5 GPM #32 Nozzle @ 65 PSI, 20.5 GPM #33 Nozzle @ 65 PSI, 22.9 GPM

Trajectory 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30°

"A" Radius 46' 46' 50' 53' 54' 50' 46' 49' 51' 55' 63' 54' 54' 56' 59' 62' 66' 61'

"B" Spray Height 4' 4' 5' 8' 11' 13' 3' 4' 6' 9' 12' 15' 4' 5' 7' 9' 13' 15'

"C" Distance from Head 25' 25' 26' 33' 33' 33' 20' 24' 28' 34' 34' 34' 23' 28' 32' 34' 35' 35'

Nozzle/PSI/GPM #34 Nozzle @ 65 PSI, 30.0 GPM #35 Nozzle @ 65 PSI, 32.4 GPM #36 Nozzle @ 80 PSI, 34.0 GPM

Trajectory 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30°

"A" Radius 58' 60' 63' 67' 74' 70' 59' 61' 64' 70' 76' 74' 64' 68' 76' 80' 84' 82'

"B" Spray Height 4' 4' 6' 11' 14' 17' 4' 5' 7' 11' 15' 17' 5' 7' 9' 14' 17' 22'

"C" Distance from Head 24' 26' 35' 39' 39' 39' 30' 32' 36' 43' 43' 43' 25' 38' 40' 45' 49' 45'

A

Nozzle/PSI/GPM #37 Nozzle @ 80 PSI, 39.8 GPM

Trajectory 7° 10° 15° 20° 25° 30°

"A" Radius 65' 69' 78' 82' 86' 84'

"B" Spray Height 5' 7' 9' 14' 18' 22'

"C" Distance from Head 30' 39' 41' 46' 50' 46'

FLX55-6 Trajectory Performance

Nozzle/PSI/GPM #51 Nozzle @65 PSI, 15.7 GPM #52 Nozzle @65 PSI, 20.8 GPM #53 Nozzle @65 PSI, 23.4 GPM

Trajectory 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30°

"A" Radius 46' 46' 51' 53' 54' 50' 49' 50' 51' 55' 64' 65' 54' 56' 59' 62' 68' 61'

"B" Spray Height 4' 4' 6' 10' 13' 15' 4' 4' 6' 9' 11' 13' 5' 6' 7' 9' 13' 15'

"C" Distance from Head 26' 27' 32' 38' 40' 41' 22' 26' 31' 35' 34' 30' 30' 33' 32' 35' 37' 37'

Nozzle/PSI/GPM #54 Nozzle @ 65 PSI, 31.2 GPM #55 Nozzle @ 65 PSI, 33.8 GPM #56 Nozzle @ 80 PSI, 35.7 GPM

Trajectory 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30°

"A" Radius 58' 60' 63' 67' 74' 70' 59' 62' 66' 70' 76' 77' 72' 73' 75' 82' 85' 82'

"B" Spray Height 5' 6' 8' 10' 15' 17' 6' 6' 9' 11' 15' 17' 5' 7' 9' 14' 17' 22'

"C" Distance from Head 31' 34' 40' 41' 41' 42' 34' 36' 43' 45' 45' 45' 25' 38' 40' 45' 49' 45'

Nozzle/PSI/GPM #57 Nozzle @ 80 PSI, 41.9 GPM #58 Nozzle @ 80 PSI, 46.2 GPM #59 Nozzle @ 80 PSI, 53.3 GPM

Trajectory 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30°

"A" Radius 72' 74' 77' 83' 89' 85' 75' 77' 83' 87' 92' 88' 77' 78' 84' 89' 96' 92'

"B" Spray Height 5' 7' 9' 14' 18' 22' 6' 7' 10' 15' 18' 22' 7' 8' 11' 16' 21' 25'

"C" Distance from Head 30' 39' 41' 46' 50' 46' 38' 40' 43' 47' 52' 48' 42' 44' 45' 47' 53' 49'

Information is for reference only. Actual results may vary.

FLX35-6 Series Performance Chart

Nozzle Set 30

Nozzle Set 31

Nozzle Set 32

Nozzle Set 33

Nozzle Set 34

Nozzle Set 35

Nozzle Set 36

Nozzle Set 37

Base

Pressure

PSI Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM
50 42 7.1 52 13.7 61 17.1 64 20.2 69 27.4 — — — — — —
65 45 8.7 54 15.5 63 20.5 66 22.9 74 30.0 76 32.4 80 34.0 — —
80 46 9.6 57 17.0 67 22.6 70 25.3 77 33.2 79 35.8 84 37.5 86 40.8

100 48 11.2 59 18.9 72 25.2 74 28.2 80 37.0 84 39.9 88 42.5 92 45.3

Stator 102-6929 Blue 102-1939 Yellow 102-1940 White

(White)

102-2208 102-4587 102-4588 102-4589 102-0728 102-0729 102-0730 102-4261

Blue Gray Blue Gray Red Gray Orange Gray Orange Gray Blue Gray Blue Gray Orange Gray

102-2925 102-2910 102-2925 102-2910 102-2928 102-2910 102-2926 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910 102-2926 102-2910

Conversions FLX35-6-3134 FLX35-6-3537

(Yellow)

(Blue)

(Brown)

(Orange)

(Green)

(Gray)

(Black)

FLX55-6 Series Performance Chart

Nozzle Set 51

Base

Pressure

PSI

50 52 13.9 62 17.4 66 20.7 69 28.6 — — — — — — — — — —
65 54 15.7 64 20.8 68 23.4 74 31.2 76 33.8 81 35.7 — — — — — —
80 57 17.2 68 22.9 72 25.8 77 34.4 79 37.2 85 39.4 89 43.6 92 47.5 96 57.0

100 59 19.1 73 25.5 76 28.7 80 38.2 84 41.3 89 43.7 94 48.5 95 51.1 100 61.1

Stator 102-1939 Yellow 102-1940 White

Conver.

(Yellow)

102-4587 102-4588 102-4589

Blue Gray Red Gray

102-2925 102-2910 102-2928 102-2910 102-2926 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910

Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM

Nozzle Set 52

(Blue)

Toro recommends the use of a 11⁄4" swing joint at flows over 25-GPM (95-LPM). Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.

Nozzle Set 53

(Brown)

Orange

FLX55-6-5154 FLX55-6-5558 FLX55-6-59

Gray

Nozzle Set 54

(Orange)

102-0728

Orange

Nozzle Set 55

Gray Blue Gray Blue Gray

(Green)

102-0729 102-0730 102-4261 102-4260 102-4259

All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 PSI.

Nozzle Set 56

(Gray)

Actual site conditions must be considered when selecting the appropriate nozzle.

Nozzle Set 57

n

(Black)

Orange

Not recommended at these pressures. Radius shown in feet.

Nozzle Set 58

(Red)

Gray Blue Gray Blue Gray

Nozzle Set 59

(Beige)

102-1941

Main Nozzle Adapter

A wide assortment of
intermediate and inner nozzles
for use in the main nozzle
adapter and back nozzle
position provide unmatched
nozzle flexibility.

FLEX800™ 35-6/55-6 SERIES GOLF ROTORS

Main Nozzle Adapter Performance Charts

Intermediate Nozzle Performance Charts

102-2929

Beige

Pressure Flow Radius Radius Radius Radius Radius Radius

PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters

50 3.4 8.1 30.7 53 17.4 52 17.1 50 16.4 48 15.7 45 14.8 42 13.8
60 4.1 8.9 33.7 57 18.7 56 18.4 53 17.4 51 16.7 47 15.4 45 14.8
65 4.5 9.3 35.2 58 19.0 56 18.4 54 17.7 51 16.7 49 16.1 46 15.1
70 4.8 9.6 36.3 59 19.4 57 18.7 56 18.4 53 17.4 50 16.4 48 15.7
80 5.5 10.3 39.0 61 20.0 60 19.7 58 19.0 56 18.4 53 17.4 50 16.4
90 6.2 10.9 41.3 63 20.7 61 20.0 59 19.4 57 18.7 54 17.7 51 16.7

100 6.9 11.5 43.5 65 21.3 63 20.7 60 19.7 58 19.0 55 18.0 51 16.7

Trajectory 30° 25° 20° 15° 10° 7°

102-2928

Red

Pressure Flow Radius Radius Radius Radius Radius Radius

PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters

50 3.4 6.3 23.8 53 17.4 51 16.7 48 15.7 46 15.1 43 14.1 40 13.1
60 4.1 7.0 26.5 55 18.0 53 17.4 50 16.4 48 15.7 45 14.8 42 13.8
65 4.5 7.2 27.3 56 18.4 54 17.7 52 17.1 49 16.1 47 15.4 44 14.4
70 4.8 7.5 28.4 57 18.7 55 18.0 53 17.4 51 16.7 49 16.1 46 15.1
80 5.5 8.0 30.3 59 19.4 58 19.0 56 18.4 54 17.7 52 17.1 49 16.1
90 6.2 8.5 32.2 60 19.7 58 19.0 57 18.7 55 18.0 53 17.4 50 16.4

100 6.9 9.0 34.1 61 20.0 59 19.4 57 18.7 55 18.0 53 17.4 50 16.4

102-2927

Gray

Pressure Flow Radius Radius Radius Radius Radius Radius

PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters

50 3.4 5.0 18.9 50 16.4 48 15.7 46 15.1 44 14.4 41 13.5 38 12.5
60 4.1 5.5 20.8 52 17.1 50 16.4 48 15.7 46 15.1 43 14.1 40 13.1
65 4.5 5.7 21.6 53 17.4 51 16.7 49 16.1 46 15.1 44 14.4 41 13.5
70 4.8 5.9 22.3 53 17.4 51 16.7 49 16.1 47 15.4 45 14.8 42 13.8
80 5.5 6.3 23.8 54 17.7 52 17.1 50 16.4 48 15.7 46 15.1 43 14.1
90 6.2 6.7 25.4 55 18.0 53 17.4 52 17.1 50 16.4 48 15.7 45 14.8

100 6.9 7.1 26.9 55 18.0 54 17.7 53 17.4 52 17.1 50 16.4 46 15.1

102-2926

Orange

Pressure Flow Radius Radius Radius Radius Radius Radius

PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters

50 3.4 4.3 16.3 48 15.7 46 15.1 44 14.4 42 13.8 39 12.8 35 11.5
60 4.1 4.7 17.8 50 16.4 48 15.7 46 15.1 44 14.4 41 13.5 38 12.5
65 4.5 4.9 18.5 51 16.7 49 16.1 47 15.4 45 14.8 42 13.8 39 12.8
70 4.8 5.1 19.3 51 16.7 50 16.4 48 15.7 46 15.1 43 14.1 40 13.1
80 5.5 5.4 20.4 52 17.1 51 16.7 50 16.4 48 15.7 45 14.8 42 13.8
90 6.2 5.8 22.0 53 17.4 52 17.1 51 16.7 49 16.1 47 15.4 44 14.4

100 6.9 6.1 23.1 54 17.7 53 17.4 52 17.1 50 16.4 48 15.7 45 14.8

Trajectory 30° 25° 20° 15° 10° 7°

Trajectory 30° 25° 20° 15° 10° 7°

Trajectory 30° 25° 20° 15° 10° 7°

102-2925

Blue

Pressure Flow Radius Radius Radius Radius Radius Radius

PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters

50 3.4 2.7 10.2 42 13.8 41 13.5 39 12.8 38 12.5 36 11.8 34 11.2
60 4.1 3.0 11.4 43 14.1 42 13.8 40 13.1 39 12.8 37 12.1 35 11.5
65 4.5 3.2 12.1 43 14.1 42 13.8 40 13.1 39 12.8 37 12.1 35 11.5
70 4.8 3.3 12.5 44 14.4 42 13.8 41 13.5 39 12.8 38 12.5 36 11.8
80 5.5 3.5 13.2 44 14.4 43 14.1 41 13.5 40 13.1 38 12.5 36 11.8
90 6.2 3.7 14.0 45 14.8 44 14.4 42 13.8 41 13.5 39 12.8 37 12.1

100 6.9 3.9 14.8 45 14.8 44 14.4 43 14.1 42 13.8 40 13.1 38 12.5

Trajectory 30° 25° 20° 15° 10° 7°

Main Nozzle Adapter Performance Charts

Intermediate Nozzle Performance Charts

102-6885

Green

Pressure Flow Radius Radius Radius Radius Radius Radius

PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters

50 3.4 5.4 20.4 51 16.7 50 16.4 48 15.7 45 14.8 42 13.8 39 12.8
60 4.1 5.9 22.3 52 17.1 51 16.7 49 16.1 46 15.1 43 14.1 41 13.5
65 4.5 6.1 23.1 52 17.1 51 16.7 50 16.4 47 15.4 44 14.4 42 13.8
70 4.8 6.3 23.8 53 17.4 52 17.1 50 16.4 47 15.4 44 14.4 42 13.8
80 5.5 6.7 25.4 53 17.4 52 17.1 51 16.7 48 15.7 45 14.8 43 14.1
90 6.2 7.1 26.9 54 17.7 53 17.4 52 17.1 50 16.4 47 15.4 45 14.8

100 6.9 7.4 28.0 55 18.0 55 18.0 54 17.7 52 17.1 49 16.1 47 15.4

Trajectory 30° 25° 20° 15° 10° 7°

102-6884

Yellow

Pressure Flow Radius Radius Radius Radius Radius Radius

PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters

50 3.4 4.1 15.5 48 15.7 47 15.4 45 14.8 41 13.5 38 12.5 35 11.5
60 4.1 4.5 17.0 49 16.1 48 15.7 47 15.4 44 14.4 41 13.5 38 12.5
65 4.5 4.7 17.8 50 16.4 49 16.1 48 15.7 45 14.8 42 13.8 39 12.8
70 4.8 4.8 18.2 50 16.4 49 16.1 48 15.7 45 14.8 43 14.1 40 13.1
80 5.5 5.1 19.3 51 16.7 50 16.4 49 16.1 47 15.4 44 14.4 41 13.5
90 6.2 5.4 20.4 53 17.4 52 17.1 50 16.4 48 15.7 45 14.8 42 13.8

100 6.9 5.8 22.0 54 17.7 53 17.4 51 16.7 49 16.1 46 15.1 43 14.1

102-6883

Brown

Pressure Flow Radius Radius Radius Radius Radius Radius

PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters

50 3.4 2.4 9.1 41 13.5 40 13.1 38 12.5 36 11.8 33 10.8 30 9.8
60 4.1 2.6 9.8 43 14.1 42 13.8 40 13.1 38 12.5 36 11.8 33 10.8
65 4.5 2.7 10.2 44 14.4 42 13.8 41 13.5 39 12.8 37 12.1 34 11.2
70 4.8 2.8 10.6 45 14.8 43 14.1 42 13.8 40 13.1 38 12.5 35 11.5
80 5.5 3.0 11.4 46 15.1 45 14.8 43 14.1 41 13.5 40 13.1 36 11.8
90 6.2 3.2 12.1 46 15.1 45 14.8 44 14.4 42 13.8 41 13.5 37 12.1

100 6.9 3.4 12.9 46 15.1 45 14.8 44 14.4 43 14.1 41 13.5 38 12.5

Trajectory 30° 25° 20° 15° 10° 7°

Trajectory 30° 25° 20° 15° 10° 7°

Inner Nozzle Performance Charts*

102-6937

Yellow

Pressure Flow Radius Radius Radius

PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters

50 3.4 3.7 14.0 26 8.5 24 7.9 20 6.6
60 4.1 4.0 15.1 28 9.2 25 8.2 22 7.2
65 4.5 4.2 15.9 28 9.2 25 8.2 22 7.2
70 4.8 4.4 16.7 28 9.2 26 8.5 23 7.5
80 5.5 4.7 17.8 28 9.2 26 8.5 24 7.9
90 6.2 5.0 18.9 29 9.5 27 8.9 25 8.2

100 6.9 5.2 19.7 30 9.8 29 9.5 27 8.9

Trajectory 30° 25° 20°

Main Nozzle Adaptor
P/N 118-1521

102-6531

Green

Pressure Flow Radius Radius Radius

PSI BAR GPM lpm Feet Meters Feet Meters Feet Meters

50 3.4 4.0 15.1 32 10.5 30 9.8 26 8.5
60 4.1 4.3 16.3 34 11.2 31 10.2 27 8.9
65 4.5 4.5 17.0 34 11.2 31 10.2 27 8.9
70 4.8 4.7 17.8 34 11.2 31 10.2 28 9.2
80 5.5 5.0 18.9 34 11.2 32 10.5 29 9.5
90 6.2 5.3 20.1 34 11.2 32 10.5 29 9.5

100 6.9 5.6 21.2 35 11.5 33 10.8 30 9.8

Trajectory 30° 25° 20°

* Not recommended below 20°

FLEX800™ 35-6/55-6 SERIES GOLF ROTORS

FLX35-6 Conversion Upgrades

Models

• FLX35-6-3134

• FLX35-6-3537

• FLX35-6-3134E

• FLX35-6-3537E

FLX55-6 Conversion Upgrades—(Ribbed Body)

Models Description

• FLX55-6-5154

• FLX55-6-5558

• FLX55-6-59

• FLX55-6-5154E

• FLX55-6-5558E

• FLX55-6-59E

• 102-5011

FLX55-6 Conversion Upgrades—(Ribless Body)

Models Description

• FLX55-6-5154R

• FLX55-6-5558R

• FLX55-6-59R

• FLX55-6-5154RE

• FLX55-6-5558RE

• FLX55-6-59RE

Description

FLX35-6 w/31–34 Nozzles
(33 Nozzle Installed)
FLX35-6 w/35–37 Nozzles
(35 Nozzle Installed)
FLX35-6 w/31–34 Nozzles
(33 Nozzle Installed), Effluent
FLX35-6 w/35–37 Nozzles
(35 Nozzle Installed), Effluent

FLX55-6 w/51–54 Nozzles
(53 Nozzle Installed)
FLX55-6 w/55–58 Nozzles
(55 Nozzle Installed)
FLX55-6 w/59 Nozzle installed
FLX55-6 w/51–54 Nozzles
(53 Nozzle Installed), Effluent
FLX55-6 w/55–58 Nozzles
(55 Nozzle Installed),
FLX55-6 w/59 Nozzle installed
Effluent 690 Adapter
allows you to upgrade
any 690 with
FLX55-6 conversions

FLX55-6 w/51–54 Nozzles
(53 Nozzle Installed)
FLX55-6 w/55–58 Nozzles
(55 Nozzle Installed)
FLX55-6 w/59 Nozzle installed
FLX55-6 w/51–54 Nozzles
(53 Nozzle Installed), Effluent
FLX55-6 w/55–58 Nozzles
(55 Nozzle Installed), Effluent
FLX55-6 w/59 Nozzle installed, Effluent

Operating Specifications

• Inlet:

- FLX35-6: 1” ACME

- FLX55-6: 1½” ACME

• Radius:

- FLX35-6: 42’ – 92’

- FLX55-6: 52’ – 100’

• Flow Rate:

- FLX35-6: 7.1 – 45.3 GPM

- FLX55-6: 13.9 - 61.1 GPM

• Precipitation Rates:

- FLX35-6: Minimum - .37”/hr; Maximum - .53”/hr

- FLX55-6: Minimum - .43”/hr; Maximum - .60”/hr

• Pilot Valve: Selectable at 50, 65, 80 and 100 PSI

• Recommended Operating Pressure Range: 65-100 PSI
(maximum -150 PSI and minimum - 40 PSI)

• Activation types – Electric Valve-in-Head:

- Standard Solenoid:
n24 VAC, 50/60 Hz
nInrush: 0.30 A
nHolding 0.20 A

- Spike Guard Solenoid:
n24 VAC, 50/60 Hz
nInrush: 0.12 A
nHolding 0.10 A

- Nickel-Plated Spike Guard Solenoid:
n24 VAC, 50/60 Hz
nInrush: 0.12 A
nHolding 0.10 A

- DC Latching Solenoid (DCLS):
nMomentary low voltage pulse

- Integrated GDC Module w/DCLS:
nMomentary low voltage pulse

• Trajectory: 24 positions from 7° - 30° in 1° increments

Additional Features

• FLX35-6 has eight nozzle
variations (30, 31, 32, 33,
34, 35, 36 and 37)

• FLX55-6 has nine nozzle
variations (51, 52, 53, 54,
55, 56, 57, 58 and 59)

• Four in-line nozzles,
rotating stream pattern

•

One back nozzle position

•

Stator variations:

FLX

35-6 – 3

and FLX55-6 – 3

•

Ratcheting riser

•

Nozzle base clutching

Dimensions

• Body Flange Diameter:

- FLX35-6: 61/2”

- FLX55-6: 71/2”

• Body height:

- FLX35-6: 10”

- FLX55-6: 113/8”

• Weight:

- FLX35-6: 2.94 lbs.

- FLX55-6: 3.61 lbs.

• Weight–Integrated GDC

- FLX35-6: 3.63 lbs.

- FLX55-6: 4.30 lbs.

•

Pop-up height to nozzle: 3¼”

Warranty

• Three years

• Five years when installed with Toro Swing Joints

Specifying Information—FLX35-6 & FLX55-6

FLXX5-XXX-X6-7

Body
Inlet

FLXX 5 X X X X 6 7

3—1"
5—11⁄2"

Note: Not all models available. * All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 PSI.

www.toro.com / e Toro Company, Irrigation Division / 5825 Jasmine Street, Riverside, CA 92504 / 877-345-8676 / Specications subject to change without notice / © 2015. All rights reserved / P/N 15-5058-IG

Arc Nozzle

5—Part-circle and
Full-circle
In One

Example: When specifying an FLX35-6 Series Sprinkler with #34 nozzle, pressure regulation at 65 PSI and Spike Guard you would specify: FLX35-346-26

FLX35—30, 31, 32, 33 , 34, 35, 36, 37
FLX55—51, 52, 53, 54, 55, 56, 57, 58, 59

Pressure

Regulation*

6—65 PSI
8—80 PSI
1—100 PSI

Activation Type Trajectory Optional

1—Standard Solenoid
2—Spike Guard™ Solenoid
3—Nickel-plated Spike Guard Solenoid
4—DC Latching Solenoid (DCLS)
5—Integrated GDC Module w/DCLS

6—24-position
TruJectory

7—Effluent