Toro Drip In PC Brown Dripline Sell Sheet

Regulating

Flushing

Drip In® PC

Brown Dripline

Landscape Drip

With higher water costs in our future, it makes more sense than
ever to use inline tubing in suitable landscape applications. Drip
In PC is both an eective and economical choice for at-grade
installations. This pressure compensating dripline delivers water
precisely and evenly to plant root zones from beginning to end
of the tubing run. Rugged, lightweight and flexible, Drip In PC is
also highly clog resistant thanks to its labyrinth type, turbulent
flow design. Manufactured of the highest quality resins and under
strict quality control standards, this brown tubing will blend into
the landscape and deliver years of reliable service.

FEATURES & BENEFITS

Built-in Emitters

Deliver precise water application directly to the root zone.

Fully Pressure-compensating From 15 – 60 psi

The pressure compensating design makes it ideal for slopes, high wind
areas and areas with limited water supply or low pressure.

High Uniformity

Proven, dependable pressure compensating Drip In emitters deliver
uniform, precise emitter discharge rates with exceptionally low variability.

Keeps Water O Hardscapes

Preventing unsightly water stains.

UNIQUE, CONTINUOUS FLUSHING

Three separate flushing cycles ensure ongoing
reliability and performance of the pressure
compensating Drip In emitter. Flushing
occurs at low pressure at start up, during the
irrigation cycle if the emitter begins to clog and
there is a reduction in flow, and as pressure
drops during shut-down.

HIGHLY CLOG RESISTANT

Unique, raised internal filtration design
deflects debris upward and away from the
emitter’s inlet. Because the inlet is also raised,
sediment won’t collect at the inlet while the
system is o.

DUAL OPPOSED OUTLETS

In above ground installations, dual opposing
ports in every emitter assure that at least one
outlet provides air relief, which prevents back­siphonage of contamination into the emitter.

l

(

h)

Head Loss v. Dripline Length and Emitter Spacing

Drip In PC 5/8", 0.53 gph (2 lph) Emitter @ 0% Slope.

0

5

10

15

20

25

30

35

40

0100 200 300 400 500 600 700 800 900

Dripline Length (feet)

Head Loss (psi)

12" (304 mm)
Spacing

18" (457 mm)
Spacing

12" 18"

Head Loss v. Dripline Length and Emitter Spacing

Drip In PC 5/8", 1.06 gph (4 lph) Emitter @ 0% Slope.

0

5

10

15

20

25

30

35

40

050 100 150 200 250 300 350 400 450 500 550

Head Loss (psi)

12" (304 mm)
Spacing

18" (457 mm)
Spacing

12" 18"

Drip In® PC Brown Dripline

Drip In PC 5/8"

1.20

1.00

0.80

gp

0.60

ow rate
F

0.40

0.96

0.52

0.99

0.53

Emitter discharge rate vs. pressure

1.04

1.03

1.01

0.55

0.54

0.54

1.05

0.55

1.06

0.55

1.07

0.55

1.08

0.56

1.09

0.56

0.5 gph (2 lph)

1.0 gph (4 lph)

5/8” (0.620” ID / 0.710” OD) INLET PRESSURE VS. MAX LENGTH OF RUN IN FEET

Part Number Tubing Size Flow Rate Emitter Spacing 15 psi 25 psi 30 psi 40 psi

T-PCB1853-12 .620” ID .53 gph 12” 250’ 360’ 400’ 460’

T-PCB1853-18 .620” ID .53 gph 18” 350’ 515’ 565’ 650’

T-PCB1810-12 .620” ID 1.0 gph 12” 160’ 240’ 260’ 300’

T-PCB1810-18 .620” ID 1.0 gph 18” 240’ 340’ 375’ 430’

Specifications

Options Available

• 12” and 18” spacing is available

• Coil lengths of 100’, 250’ and 500’

5/8” BROWN PC DRIPLINE
(0.620” ID X 0.710” OD X 0.045” WALL)

Model Description

T-PCB1853-12-100 0.53 GPH, 12” emitter spacing, 100’ coil
T-PCB1810-12-100 1.0 GPH, 12” emitter spacing, 100’ coil
T-PCB1853-18-100 0.53 GPH, 18” emitter spacing, 100’ coil
T-PCB1810-18-100 1.0 GPH, 18” emitter spacing, 100’ coil
T-PCB1853-12-250 0.53 GPH, 12” emitter spacing, 250’ coil

T-PCB1853-18-250 0.53 GPH, 18” emitter spacing, 250’ coil
T-PCB1810-18-250 1.0 GPH, 18” emitter spacing, 250’ coil
T-PCB1853-12-500 0.53 GPH, 12” emitter spacing, 500’ coil
T-PCB1810-12-500 1.0 GPH, 12” emitter spacing, 500’ coil
T-PCB1853-18-500 0.53 GPH, 18” emitter spacing, 500’ coil
T-PCB1810-18-500 1.0 GPH, 18” emitter spacing, 500’ coil

T-PCB1810-12-250 1.0 GPH, 12” emitter spacing, 250’ coil

www.toro.com • The Toro Company • Irrigation Division

5825 Jasmine St. • Riverside, CA • 92504 • 877-345-8676

Specifications subject to change without notice. For more information, contact your local Toro distributor. ©2015 The Toro Company. All rights reserved.
P/N 15-1063-IRC

0.20

0.00
05 1 0 15 20 25 30 35 40 45 50 55 60

Pressure in psi

LENGTH OF RUN CHART

PERFORMANCE TABLE

Flow Rate .53/1.06 gph

Inside Diameter 0.620”

Outside Diameter 0.710”

Wall 0.045”

Operating Pressure (P)

Minimum Filtration Requirement 120 Mesh

Hazen-Williams C Factor 140

Barb Loss Factor (Kd) .98

Specifying Information—DripIn PC

T-P CB-18-XX-XX-XXX

Tubing Type Tubing Size

T-P CB 18 XX XX XXX

T-PCB–Brown
Tubing

18–5/8”

(.720 OD

X 0.620” ID)

Example: A coil of 5/8” (0.620” ID) pressure compensating .53 gph emitters spaced at

12” on a 500’ coil would be specified as: T-PCB1853-12-500

15–60 psi

Emitter Flow

(gph @ 30 psi)

53–0.53 gph
10–1.00 gph

Emitter Spacing Coil Length

12–12”
18–18”

100–100’
250–250’
500–500’