Toro DDC WP Data Sheet
DDC™WP Series
Controllers
Looking for a rugged waterproof controller ideal for remote or
isolated installations? Toro’s DDCWP Series controller provides
all that and more. Using the new potted DC latching solenoid
popular on Toro EZFlo® Plus, TPV, P-220 and 220 Brass Series
valves, the DDCWP is battery-operated using two 9V batteries.
Toro’s exclusive digital dial technology provides the simplicity
of a mechanical dial without any moving parts. The digital dial
guides users through simple programming functions without
the potential for mechanical failure common to traditional
dials. Available in 2-, 4-, 6-, and 8-station models, the DDCWP
is a controller for those who demand a step above the rest.
Features & Benefits
Fully Waterproof and Submersible
Submersible up to 6.5’ per IP-68 standards,
allowing contractors to mount up to an
8-station controller in a valve box.
Operates DC Latching Solenoids
Controller is compatible with most manufacturers’
DC Latching solenoids.
Exclusive “Digital Dial” Technology
Simple programming functions.
Unique Power Feature
Verifies sufficient voltage level for turning stations
off before turning any stations on.
Monthly Watering Schedule
Monthly preset option – ideal for automatic
runtime adjustments. Delay with Pump-enabled
Option.
Wired Rain
Sensor
Compatible
DDC™WP Series
EZ-Flo® and P-220 valves shown with the DCLS-P Latching
solenoid which provide cost and labor savings.
Battery Cap
Easy installation of two 9V batteries with the simple screw
on/off lid. The battery cap provides a dependable leak- proof
seal allowing submersion up to 6.5’ per IP-68.
Water Management Highlight
Specifications
Model Description
• DDCWP-2-9V
• DDCWP-4-9V
• DDCWP-6-9V
• DDCWP-8-9V
Dimensions
• 5 ¾” W x 5” H x 1 15⁄16” D
• Weight: 23.3 oz. (without 9V battery)
Operating Specifications
• Operating temperature: 0° - 60° C
• Operates using two x 9V alkaline batteries (not supplied)
• Operates one latching solenoid per station and one latching
solenoid-equipped master valve
• Controller is compatible with all Toro valves accepting latching
solenoids (model DCLS-P or equivalent) and competitive
valve models/latching solenoids
• Accepts Toro TRS RainSensor™ and other normally closed sensors
• Low-battery indicator visible on LCD screen
• Three independent programs and three start times per program
• Three scheduling choices by program:
–Seven-day calendar
–1 to 7-day interval
–Odd/even with 365-day calendar and 31st day exclusion
• Station run times from one minute to four hours in
one-minute increments
• Seasonal adjust by month from 0-200% in 10% increments
• Manual operation by station or program
• Self-diagnostic circuit breaker skips shorted stations
• Five-year program retention with on-board coin battery saves
time of day and all programming features
Warranty
• Three years
www.toro.com • The Toro Company • Irrigation Division
5825 Jasmine St. • Riverside, CA • 92504 • 877-345-8676
Specifications subject to change without notice. For more
information, contact your local Toro distributor. P/N 13-1090-IRC
©2013 The Toro Company. All rights reserved.
2-station
4-station
6-station
8-station
Monthly % Adjust
DDCWP adjusts annual irrigation run time the first time the
controller is set up. Options include from 0-200% and January
to December scheduling. With easy adjusting for seasonal
watering, water savings is enhanced for all-around intelligent
programming.
1 = The first month, January
10 = 100%. 140% would be designated as 14.
Wire Run Lengths for DDCWP
With battery voltage at 9 VDC,
maximum recommended wire runs
for an 8-station DDCWP are:
Multi-strand
Wire
18 AWG 197
16 AWG 305
14 AWG 493
12 AWG 820
Distance
Feet
Specifying Information
DDCWP-X-9V
Description Stations Voltage
DDCWP
DDCWP—Digital Dial
Waterproof
Controller
Example: An 8 station DDCWP controller would be specified as:
2—2 Stations 6—6 Stations
4—4 Stations 8—8 Stations
DDCWP-8-9V
XX XX
9V—9 Volt
Loading...