Toro 79451 Operator's Manual

Quiet Collector

FORM NO. 3322-160

Model No. 79451-9900001 & Up

Operator’s Manual

IMPORTANT: Read this manual, and your tractor manual, carefully. They
contain information about your safety and the safety of others. Also become
familiar with the controls and their proper use before you operate the product.

.

ce

INTERNATIONAL ENGLISH (GB)

Introduction

We want you to be completely satisfied with
your new product, so feel free to contact your
local Authorized Service Dealer for help with
service, genuine replacement parts, or other
information you may require.

Whenever you contact your Authorized Service
Dealer or the factory, always know the model
and serial numbers of your product. These
numbers will help the Service Dealer or Service
Representative provide exact information about
your specific product. You will find the model
and serial number plate located in a unique
place on the product as shown below.

The warning system in this manual
identifies potential hazards and has
special safety messages that help you
and others avoid personal injury, even
death. DANGER, WARNING, and
CAUTION are signal words used to
identify the level of hazard. However,
regardless of the hazard, be extremely
careful.

DANGER signals an extreme hazard that
will cause serious injury or death if the
recommended precautions ar e not
followed.

WARNING signals a hazard that may
cause serious injury or death if the
recommended precautions ar e not
followed.

CAUTION signals a hazard that may
cause minor or modera te injury if the
recommended precautions ar e not
followed.

1. Model and Serial Number Plate

For your convenience, write the product model
and serial numbers in the space below.

Model No:__________________________
Serial No.:__________________________

1

Two other words are also used to

highlight information. “Important” calls
attention to special mechanical
information and “Note” emphasizes
general information worthy of special
attention.

The left and right side of the machine is
determined by sitting on the seat in the
normal operator’s position.

© The Toro Company
All rights reserved

Contents

Page

Safety and Instruction decals................................................................................. 2

Installation

Loose Part.................................................................................................. 3

Installing Quick Hitch.................................................................................. 4

Installing Double Idler................................................................................. 4

Tractor with R.O.P...................................................................................... 5

Installing Mower ......................................................................................... 5

Installing Collector...................................................................................... 6

Tube Cut to Length..................................................................................... 6

Boot Installation.......................................................................................... 7

Tube Installation......................................................................................... 7

Operation

Operating Collector .................................................................................... 8

Dumping Action.......................................................................................... 9

Draft Control............................................................................................... 9

Fill gauge Control....................................................................................... 9

Maintenance

Filter Cleaning............................................................................................ 10

V-belt Inspection......................................................................................... 10

Storage .......................................................................................................... 11

Troubleshooting...................................................................................................... 11

_____

1

Safety

______________________________________________________

Safety and Instruction Decals

Safety decal and instructions are easily visible to the operator and are
located near any area of potential danger. Replace any decal that is
damaged or lost.

(1) ON DUMP ARM (1) ON DRAFT CONTROL

(Part No. 98-3679) (Part No. 98-3680)

PLATE

___

2