Toro 79365 Addendum

42” Snowthrower

FORM NO. 3319–989

MODEL NO. 79365

MODEL NO. 715706006

This document contains an additional procedure to mount the snow deflector in the correct throwing position.

Mounting the Snow Deflector

1. Remove the carriage bolts, nuts, and washers

securing the snow deflector (Fig. 1).

2. Swing the snow deflector back, over the lip of

the upper section of the discharge chute (Fig. 1).

3. Secure the snow deflector with the carriage bolts

(heads to the inside), nuts, and washers removed
previously (Fig. 1).

1. Discharge Chute 2. Snow Deflector

OPERATOR’S MANUAL

ADDENDUM

IMPORTANT: Tighten nuts only enough to
give friction between the chute and deflector.
The deflector must pivot for adjustment.

1

Figure 1

2

m–3754

FORM NO. 3319–989

42” Snowthrower

MODEL NO. 79365

MODEL NO. 715706006

This document contains an additional procedure to mount the snow deflector in the correct throwing position.

Mounting the Snow Deflector

4. Remove the carriage bolts, nuts, and washers

securing the snow deflector (Fig. 1).

5. Swing the snow deflector back, over the lip of

the upper section of the discharge chute (Fig. 1).

6. Secure the snow deflector with the carriage bolts

(heads to the inside), nuts, and washers removed
previously (Fig. 1).

1. Discharge Chute 2. Snow Deflector

OPERATOR’S MANUAL

ADDENDUM

IMPORTANT: Tighten nuts only enough to
give friction between the chute and deflector.
The deflector must pivot for adjustment.

1

Figure 2

2

m–3754