Toro 7275 Installation Instructions

Form No. 3324-915 Rev A

Heavy-Duty Rear Hitch

Workman 1100/2100 and Twister Utility Vehicle

Model No. 07275

Installing the Hitch

1. Position the machine on a level surface. Set the parking

brake, turn the ignition off, and remove the key.

Caution

If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure you or other bystanders.

Remove the key from the ignition switch before you do any maintenance.

Note: Installation may be easier if the cargo box is

removed.

2. Remove the existing hitch and hardware. Save them for

future installation.

3. Position the heavy-duty hitch on the rear of the frame as

shown in Figure 1.

Installation

Instructions

Towing

Warning

Towing a load could cause loss of control or tipping of the vehicle, resulting in personal injury.

• To provide adequate braking and traction,

always load the cargo box when trailering. Do not exceed the Gross Trailer Weight limits.

• Do not tow a load that exceeds 800 lb. (363 kg).

• Do not exceed a tongue weight of 100 lb. (45 kg).

• Never exceed 10 MPH (16 km/h) when towing a

load.

4. Secure the hitch with 8 flange head bolts and locknuts

(Fig. 1). Tighten the fasteners to 25 ft.-lb. (34 N⋅m).

Figure 1

1. Heavy-duty hitch

2. Flange head bolts

3. Locknuts

 2001 by The Toro Company 8111 Lyndale Avenue South Bloomington, MN 55420-1196

Printed in the USA