Page 1
Reelmaster® 7000-D
The Reelmaster 7000-D is a multi-use, heavy-duty reel mower designed for productivity and performance in the most
extreme fairway and rough conditions. We started with patented DPA cutting units that manicure your turf and save you time
with easy set-up and long-lasting adjustments. Then, we added a 55 horsepower Yanmar
motors, and the SmartCool™ auto-reversing fan system so southern grasses and high heat don’t stand a chance. Finally,
we combined it all with a whopping 126” width-of-cut! This mower has it all – power, productivity, and superior aftercut
appearance. By the way, it’s also an overseeding monster!
®
diesel engine, high-torque reel
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
77
Page 2
ENGINE
LUBRICATION
AIR CLEANER
ENGINE COOLING
FUEL TANK CAPACITY
HYDRAULICS/COOLING
MAIN FRAME
TRACTION DRIVE
GROUND SPEED
TIRES
BRAKES
STEERING
GAUGES/INDICATORS
SEAT
CONTROLS
ELECTRICAL & INTERLOCKS
DIAGNOSTICS
DIMENSIONS
WITH CUTTING UNITS
WEIGHT
SAFETY CERTIFICATION
WARRANTY
Reelmaster® 7000-D Specifications*
REELMASTER 7000-D, MODEL 03780
Tier 4 emission compliant Yanmar® 4-cylinder, liquid-cooled diesel engine, 55 hp (41 kW)
6-Quarts (5.7 liters)
Dry, replaceable primary and safety elements.
Rear-mount, aluminum, 6 fins per inch, 9 quart (8.5 liters) capacity.
22 gallons (83 liters) diesel fuel. Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petrol blend).
8.25 gallon (31.3 liter) capacity with 10 micron remote spin-on filter, aluminum side-mounted cooler. Variable speed hydraulic fan drive with automatic (based on
coolant and oil temps) and manual reversing capabilities.
All welded formed-steel frame with integral tie-down anchors.
Full-time, bi-directional, hydrostatic, closed-loop, 4WD transmission. Optional 4WD Flow Divider Kit, model 30876
Transport: 0-14 mph (0-22.5 km/h) forward, 0-7 mph (0-11 km/h) reverse. Mow: 0-7 mph (0-11 km/h) forward.
Front: 31x13.5-15, 4-ply turf tire. Rear: 20 x 12-10, 4-ply multi-trac tread. 12-15 PSI recommended range.
Mechanically actuated, internal wet disc brakes. Individual foot-operated steering brake control of left and right wheel or lock pedals together.
Power steering with dedicated power source, tilt steering.
Onboard LCD InfoCenter display shows alerts, faults, service reminders, electrical systems diagnostics, coolant temp., low oil pressure, alternator, engine hours,
engine rpm, voltage, reel speed, backlap speed, glow indicator, lift/lower indicator.
Premium air ride suspension seat with full range of adjustments; retractable seat belt.
Ignition switch, hand-operated throttle, foot-operated traction pedal, joystick for cutting unit lift, mow/transport selector switch, lockable individual brake pedals,
park brake.
12-volt, 650 CCA battery, 80 amp alternator. Overload protection with automotive type fuses. Interlocks for: starting, operator presence, mowing, transport and parking brake.
Diagnostics pressure test ports: forward and reverse traction, cutting unit circuit 1 & 2, lift, steering, traction charge and fan
REEL OPTIONS
All 27” CUs or 32” in the rear All 32” CUs
Overall length w/cutting units down 146" (371 cm) 146" (371 cm)
Transport width 94" (239 cm) 94" (239 cm)
Mow width 136” (345 cm) 141” (358 cm)
Height w/2-post ROPS 87" (220 cm) 87" (220 cm)
3,470 lbs. (1574 kg) - with full fluids, no cutting units. 4,270 lbs (1937 kg) - with full fluids and 27” 8-blade cutting units.
Complies with American National Standards Institute (ANSI B71.4-2012) and applicable CE (EN ISO 5395) requirements.
Two-year limited warranty. Refer to the Operator’s Manual for further details.
Cutting Units: 27” 8-BLADE, MODEL 03710 27” 11-BLADE, MODEL 03711 32” 8-BLADE, MODEL 03712
5-plex, hydraulically driven, with adjustable rear weight transfer spring. Interchangeable to all positions with rear throw capability.
TYPE
7” (17.8 cm) diameter, 27" (68.6 cm) wide, 8 & 11" blade cutting units and 32” (81.3 cm) 8-blade cutting units.
SIZE
WIDTH OF CUT
HOC RANGE
REEL SPEED
BEDKNIFE ADJUSTMENT
ROLLERS
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
121” (307 cm) or 126” (320 cm)
0.25" - 2.50" (6.35 - 63.5 mm)
Manually controlled, variable reel speed, incrementally adjustable between 200-1,650 rpm with a backlap speed of 200 rpm.
Dual Precision Adjustment (DPA), bedknife to reel.
3" (7.6 cm) diameter, deep groove plastic front Wiehle roller. 3.0" (7.6 cm) diameter steel rear roller (other roller configurations optional).
78
The Reelmaster 7000-D is manufactured
in Tomah, WI ISO 9002 Certified Plant.
Page 3
Reelmaster® 7000-D Accessories
*
CUTTING UNITS
03710 27" - 8-Blade DPA Cutting Unit
03711 27" - 11-Blade DPA Cutting Unit
127-2093 27" - 5-Blade Service Reel
03712 32” – 8-Blade DPA Cutting Unit
127-2104 32” - 5-Blade Service Reel
03716 27” Verticutter Cutting Unit
ROLLERS
114-9383 27" Full Front Roller
114-9384 32" Full Front Roller
119-0630 27" Shouldered Wiehle Roller
119-0640 32" Shouldered Wiehle Roller
119-4286 27” Short Rear Roller
119-4288 32” Short Rear Roller
SCRAPER OPTIONS
114-9372-03 27” Wiehle Roller
114-9373-03 32” Wiehle Roller
114-9386-03 27” Full Front Roller
114-9387-03 32” Full Front Roller
114-9381-03 27” Shouldered Wiehle Roller
114-9382-03 32” Shouldered Wiehle Roller
114-9368 27” - Rear Roller Scraper Kit
114-9369 32” - Rear Roller Scraper Kit
114-9376 27” - Front Roller Comb/Scraper Kit
114-9377 32” - Front Roller Comb/Scraper Kit
TRACTION UNIT ACCESSORIES
30349 Universal Mount Sunshade – White
30552 Universal Mount Sunshade – Red
110-8804 Operator Fan Kit
119-0020 2-Post ROPS Extension
119-9440
Windscreen Kit for ROPS Extension
(requires 119-0020)
OTHER ACCESSORIES
117-0975 Rear Bearing Installation Tool
108-6715 HOC Gauge Bar
29-9100 Backlap Brush and Handle
04399 Turf Evaluator
BEDKNIFE OPTIONS
114-9388 27” Standard (Production)
114-9389 32” Standard (Production)
114-9390 27” Heavy-Duty Fairway
114-9391 32” Heavy-Duty Fairway
120-1641 27” Ext. Low Cut Fairway
120-1642 32” Ext. Low Cut Fairway
112-8910 27” EdgeMax
112-8956 32” EdgeMax
CUTTING UNIT ACCESSORIES
03186
03187
115-0838
115-0849
03713 & 03714
27” Rear Roller Brush Kit (up to 2”
HOC only)
32” Rear Roller Brush Kit (up to 2”
HOC only)
27” Roller Brush (High HOC > 1” on
03186)
32” Roller Brush (High HOC > 1” on
03187)
27” Groomer Kit – 3x 03713 (LH) & 2x
03714 (RH)
TM
TM
119-4294 27” Broomer Kit
119-0649 27" Collar Kit for Wiehle Roller (6)
119-0649 32" Collar Kit for Wiehle Roller (6)
110-4086 Rear Roller Brush / Groomer Rebuild Kit
114-5430 Roller Rebuild Kit
115-0803 Roller Rebuild Tool Kit
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in design, required attachments and safety features. Consult your Toro Distributor.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
79
The Reelmaster 7000-D is manufactured
in Tomah, WI ISO 9002 Certified Plant.
Loading...