Toro 22980 Installation Instructions

Download

Page 1

BackllBlade

TRXTrenchers

ModelNo.22980—SerialNo.290000001andUp

Safety

SafetyandInstructionalDecals

Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyareaof potentialdanger.Replaceanydecalthatisdamagedorlost.

117-6252

1.Entanglementhazard;trencher—removetheignitionkeybeforeinstallingthebladeorperforminganymaintenance.

FormNo.3361-864RevA

InstallationInstructions

117-6251

1.Inserttherearmountingbracketintothebaseofthetrencher.3.Securethefrontmountingbracketwiththemountingplate

2.Insertthefrontmountingbracketintotheboom.

Registeratwww.Toro.com.

andlynchpin.

4.Lowertheboomtolowerthebladetotheground.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

Page 2

Installation

G010365

G010366

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Blade1 Rearmountingbracket1 Carriagebolt Locknut6 Frontmountingbracket1 Carriagebolt Locknut4

Qty.

InstallingtheRearMounting Bracket

Installtherearmountingbracketontothebladeusing6 carriageboltsandlocknuts(Figure1).

Use

Installtherearmountingbracket.

Installthefrontmountingbracket.

InstallingtheFrontMounting Bracket

Installthefrontmountingbracketontothebladeusing 4carriageboltsandlocknuts(Figure2).

Figure1

1.Carriagebolt

2.Blade4.Locknut

3.Rearmountingbracket

Figure2

1.Blade3.Locknut

2.Carriagebolt

4.Frontmountingbracket

Page 3

Operation

G010367

G010368

G010369

Note:Determinetheleftandrightsidesofthe machinefromthenormaloperatingposition.

InstallingtheBladeonthe Trencher

Ifyouattempttoinstallorremovetheblade withthetrenchermotorrunning,someone couldaccidentallystartthechain,whichcould severelyinjureorkillyou.

Alwaysstoptheengineandremovetheignition keybeforeattemptingtoinstallorremovethe blade.

1.Raisetheboom,stoptheengine,andremovethe ignitionkey.

Figure4

5.Slidethemountingplateontothefrontmounting bracket,securingitwiththeattachedlynchpin (Figure5).

2.Slidetherearmountingbracketofthebladeinto theopeningonthetrenchertotheleftoftheboom, seatingitonthecrossbar(Figure3).

Figure3

3.Removethelynchpinandmountingplatefromthe frontmountingbracket(Figure5).

4.Swingthebladetotheright,insertingthefront mountingbracketintotheopeningintheboom (Figure4).

1.Lynchpin(lanyardnot shown)

2.Mountingplate

Figure5

3.Frontmountingbracket

Page 4

BackllingaTrench

G010481

1.Drivethetrencherwiththebladeattachedtothe endofthetrench,orientingthebladejustbehind thespoilspilesothattheleftendoftheblade overlapstherightsideofthetrench(Figure6).

Figure6

RemovingtheBlade

Ifyouattempttoinstallorremovetheblade withthetrenchermotorrunning,someone couldaccidentallystartthechain,whichcould severelyinjureorkillyou.

Alwaysstoptheengineandremovetheignition keybeforeattemptingtoinstallorremovethe blade.

2.Lowertheboomuntilthebladetouchestheground, butdonotdigthebladedownintotheground.

Note:Ifyouarebackllingoversodthatyoudo notwanttornup,lowerthebladeuntilitisjust touchingthetopofthegrass.Thatwayitwillpush mostofthesoilintothetrenchwithoutdigginginto thesod.Youcanthenrakeintheremainingsoil afterbacklling.

3.Drivethetrencherforward,pushingthespoilssoil intothetrench.

1.Raisetheboomtoliftthebladeoffoftheground.

2.Stoptheengineandremovetheignitionkey .

3.Removethelynchpinandmountingplatefromthe frontmountingbracket(Figure5).

4.Pullthefrontmountingbracketoutoftheboom andliftthebladeoffofthetrencher.

5.Installthemountingplateandlynchpinbackonthe frontmountingbracketforstorage.

LoadingtheBladeonaTrailer

Removethebladebeforeloadingthetrencherona trailer.Storeandsecureitseparatelyfromthetrencher.

Important:Ifyouattempttoloadthetrencher withthebladeattachedontotheToroTRXtrailer, youmaydamagethetrailerortheblade.Always removethebladebeforeloadingitonthetrailer.

Page 5

Notes:

Page 6

Notes:

Page 7

Notes:

Page 8

Toro Compact Utility Equipment Warranty

A One-Year Limited Warranty

CUE Products

The Toro® Company and its afﬁ liate, Toro Warranty Company, pursuant

Conditions and Products Covered

to an agreement between them, jointly warrant your Toro Compact Utility Equipment (“Product”) to be free from defects in materials or workmanship. The following time periods apply from the date of purchase:

Products Warranty Period

Loaders, Trenchers and 1 year or 1000 operating

Attachments hours, whichever occurs

ﬁ rst Kohler Engines 3 years All other Engines 2 years

Where a warrantable condition exists, we will repair the Product at no cost to you including diagnosis, labor, and parts.

Instructions for Obtaining Warranty Service

If you think that your Toro Product contains a defect in materials or workmanship, follow this procedure:

1. Contact any Authorized Toro Compact Utility Equipment (CUE) Service Dealer to arrange service at their dealership. To locate a dealer convenient to you, access our website at www.Toro.com. You may also call our Toro Customer Care Department toll free at 888-865-5676 (U.S. customers) or 888-865-5691 (Canadian customers).

2. Bring the product and your proof of purchase (sales receipt) to the Service Dealer.

If for any reason you are dissatisﬁ ed with the Service Dealer’s analysis or

with the assistance provided, contact us at:

LCB Customer Service Department Toro Warranty Company 8111 Lyndale Avenue South Bloomington, MN 55420-1196 Toll Free: 888-865-5676 (U.S. customers) Toll Free: 888-865-5691 (Canada customers)

Owner Responsibilities

You must maintain your Toro Product by following the maintenance procedures described in the Operator’s Manual. Such routine maintenance, whether performed by a dealer or by you, is at your expense. Parts scheduled for replacement as required maintenance (“Maintenance Parts”), are warranted for the period of time up to the scheduled replacement time for that part. Failure to perform required maintenance and adjustments can be grounds for disallowing a warranty claim.

Not all product failures or malfunctions that occur during the warranty period are defects in materials or workmanship. This express warranty does not cover the following:

Product failures which result from the use of non-Toro replacement

• parts, or from installation and use of add-on, modiﬁ ed, or unapproved accessories Product failures which result from failure to perform required mainte-

• nance and/or adjustments Product failures which result from operating the Product in an abusive,

• negligent or reckless manner Parts subject to consumption through use unless found to be defec-

• tive. Examples of parts which are consumed, or used up, during normal Product operation include, but are not limited to, digging teeth, tines, spark plugs, tires, tracks, ﬁ lters, chains, etc. Failures caused by outside inﬂ uence. Items considered to be outside

• inﬂ uence include, but are not limited to, weather, storage practices, contamination, use of unapproved coolants, lubricants, additives, or chemicals, etc. Normal “wear and tear” items. Normal “wear and tear” includes, but is

• not limited to, worn painted surfaces, scratched decals or windows, etc Any component covered by a separate manufacturer’s warranty

• Pickup and delivery charges

•

Repair by an Authorized Toro Compact Utility Equipment (CUE) Service Dealer is your sole remedy under this warranty. Neither The Toro®

Company nor Toro Warranty Company is liable for indirect, incidental or consequential damages in connection with the use of the Toro Products covered by this warranty, including any cost or expense of providing substitute equipment or service during reasonable periods of malfunction or non-use pending completion of repairs under this warranty. All implied warranties of merchantability and ﬁ tness for use are limited to the duration of this express warranty. Some states do not allow exclusions of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions and limitations may not apply to you. This warranty gives you

speciﬁ c legal rights, and you may also have other rights which vary from state to state.

Except for the engine warranty coverage and the Emissions warranty referenced below, if applicable, there is no other express warranty. The Emissions Control System on your Product may be covered by a separate warranty meeting requirements established by the U.S. Environmental Protection Agency (EPA) or the California Air Resources Board (CARB). The hour limitations set forth above do not apply to the Emissions Control System Warranty. Refer to the California Emission Control Warranty Statement printed in you operator’s manual or contained in the engine manufacturer’s documentation for details.

Items and Conditions Not Covered

General Conditions

Customers who have purchased Toro products exported from the United States or Canada should contact their Toro Distributor (Dealer) to obtain guarantee policies for your country, province, or state. If for any reason you are dissatisﬁ ed with your Distributor’s service or have difﬁ culty obtaining guarantee information, contact the Toro importer. If all other remedies fail, you may contact us at Toro Warranty Company.

Countries Other than the United States or Canada

Part Number 374-0198 Rev. A