Toro 22417, 22715 Installation Instructions

Counterweight

for Dingo Traction Units

FORM NO. 3322-722

Models 22417 and 22715

Loose

DESCRIPTION QTY. USE

Counterweight Pin Lynch

Installing

1. Slide the counterweight onto the operator

2. Secure the counterweight with the pin and lynch

Parts

pin (not available with all counterweights)

the Counterweight

platform (Fig. 1). Note: The counterweight for diesel traction

units with the battery mounted on the operator platform differs from Figure 1 in that it has a cutout area that fits around the battery.

pin (Fig. 1).

1 1 1

Install on traction unit

Note: When using the counterweight, the

rated lift capacity of the traction unit increases by about 110 lbs.

Removing

1. Remove the pin from the back of the

counterweight and slide it off of the platform.

2. Store the counterweight in a clean dry area, and

cover it to keep it clean.

Using

the Counterweight

INSTALLATION

INSTRUCTIONS

1. Operator

2. Counterweight

Printed in USA

platform

Figure 1

3. Pin

4. L

ynch pin

m–3969



The T

oro Company – 1999

The counterweight can be used any time you will be carrying a heavy load or attachment with the traction unit. Several attachments are heavy enough that they require the use of the counterweight. Refer to the attachment operator’s manual for recommendations on using the counterweight.