Toro 22302TE Setup Instructions

Dingo 220–D
Form No. 3323–143
Installing
If the valve lever is not installed, install it as follows:
1. Thread the lever into the pump selector valve
(Fig. 1).
Note: The lever should be installed with the
2. Tighten the jam nut on the lever to lock it in
position.
the V
bend toward the operator.
1
alve Lever
Setup
Instructions
Installing
1. Slide the hose clamp over the collar on the
bottom of the dust collector (Fig. 2).
2. Slide the collar on the dust collector over the
fitting on the top of the air cleaner (Fig. 2).
the Dust Collector
1
2
m–3883
Figure 1
1. Pump
Installing
The traction unit may or may not have been shipped with the wheels installed. If they are not, install the wheels on the wheel hubs, securing them with the supplied lug nuts. Torque the nuts to 55 ft-lb (75 Nm)
Printed in USA
selector lever
the Wheels
The T
oro Company – 1999
All Rights Reserved
3
Figure 2
1. Dust
2.
3. Tighten the hose clamp securely.
Bleeding
Bleed the fuel system to ensure that there is no air in the fuel lines. Refer to the Operator’s Manual for more information on bleeding the fuel system.
collector
Hose clamp
3.
Air cleaner
the Fuel System
m–4492
Setup Instructions
Installing
Decals
Install any loose decals in the areas indicated in the following figures (some decals may already be installed on the traction unit):
4
(arrow down)
10
7
4
(arrow up)
13
Left
11
Top
12
4
(arrow down)
14
15
16
8
6
Back
9
19
21
Front
4
(arrow up)
17
2
18
Right
6
4
(arrow down)
1. 98–4679
2. 99–3088 can be read from the operator’
3. 93–7275
4. 93–9084
5.
98–8218 (also place it on the side of the left arm)
(place it so that it s position)
7
6. 93–9367
7. 98–4680
8. 100–1705
9. 93–6680
10.
100–1701 (on the inside of the left arm)
11. 99–3094
5
4
(arrow down)
Figure 3
12. 99–3095
13. 100–1703
14. 100–1704
15. 98–8235
16. 93–7272
17. 93–6686
18. 100–1702
3
20
1
m-4487–4491
19.
99–3089 (place it near the parking brake lever the frame)
20.
99–3088 (place it so that it can be read from the front of the traction unit)
21.
98–8219 (place it near the throttle lever)
, inside of
2
Loading...