
Diesel power in an affordable
Diesel power in an affordable
triplex reel mower.
triplex reel mower.
Considerable power from an 18.5 net hp
Considerable power from an 18.5 net hp
Briggs & Stratton®/Daihatsu®engine.
Briggs & Stratton®/Daihatsu®engine.
Enhanced usability with a simplified
Enhanced usability with a simplified
instrument panel and controls.
instrument panel and controls.
Long-term value from a proven
Long-term value from a proven
design and durable components.
design and durable components.
2000-D
®
Consistent cutting performance
Consistent cutting performance
provided by heavy-duty 27"
provided by heavy-duty 27"
or 32" cutting units.
or 32" cutting units.
Exceptional traction with
Exceptional traction with
minimal scuffing thanks
minimal scuffing thanks
to large floatation tires.
to large floatation tires.
REELMASTER
ATTACHMENTS for added versatility.ATTACHMENTS for added versatility.
27" 11-blade cutting unit Comb kit, scrapers, HD bedknife Grass basket
The Reelmaster 2000-D
adapts to a wide range
of requirements
depending on your
grass types, cutting
practices, and demands.

POWER
ENHANCED USABILITY
CONSISTENT CUT
POWER The Toro Reelmaster 2000-D features a
3-cylinder, 18.5 net hp, Briggs & Stratton/Daihatsu,
liquid-cooled diesel engine. This proven workhorse
delivers robust power to muscle through challenging
terrain, grasses and climates. Top quality components
offer the reliability to mow strong all day and for
many years to come. Plus, isolation mounting
reduces vibration to prevent wear on the operator
and the machine.
REELMASTER
ENHANCED USABILITY The instrument panel has been
ENHANCED USABILITY The instrument panel has been
simplified with easier to read gauges that can be checked at a glance
simplified with easier to read gauges that can be checked at a glance
and the cold start clutch has been eliminated. Operators can be
and the cold start clutch has been eliminated. Operators can be
confident maneuvering on wet grass, soft turf, undulating terrain or
confident maneuvering on wet grass, soft turf, undulating terrain or
hillsides with the high flotation front and rear tires that offer maximum
hillsides with the high flotation front and rear tires that offer maximum
traction while minimizing turf abrasion and marking. The Reelmaster
traction while minimizing turf abrasion and marking. The Reelmaster
2000-D is available in both 2WD or 3WD. On 3WD models the
2000-D is available in both 2WD or 3WD. On 3WD models the
PTO switch and 3WD engagement have been integrated. Standard
PTO switch and 3WD engagement have been integrated. Standard
on-board backlapping and single-point adjustment of the bedknife
on-board backlapping and single-point adjustment of the bedknife
to the reel allows for quick and easy maintenance of the reels.
to the reel allows for quick and easy maintenance of the reels.
CONSISTENT CUT You’ll achieve a beautiful, consistent
CONSISTENT CUT You’ll achieve a beautiful, consistent
cut in a variety of conditions with either the 27" or 32" cutting
cut in a variety of conditions with either the 27" or 32" cutting
units. Each cutting unit comes in a 5 or 8-blade configuration,
units. Each cutting unit comes in a 5 or 8-blade configuration,
while the 27" cutting unit offers an additional 11-blade reel for
while the 27" cutting unit offers an additional 11-blade reel for
a more precise cut. You have complete quality control with
a more precise cut. You have complete quality control with
manually adjustable, variable reel speed. The 27" cutting units
manually adjustable, variable reel speed. The 27" cutting units
provide a 72" width of cut, while the 32" cutting units provide
provide a 72" width of cut, while the 32" cutting units provide
an impressive 85" cutting swath for maximum productivity.
an impressive 85" cutting swath for maximum productivity.
®
2000-D

SPECIFICATIONS
Reelmaster®2000-D, Model 03428
Reelmaster®2000-D, Model 03428
Engine Briggs & Stratton®/Daihatsu®, 3-cylinder, liquid-cooled, OHV, diesel engine. 23 hp gross rated, 18.5 hp net @ 2950
Engine Briggs & Stratton®/Daihatsu®, 3-cylinder, liquid-cooled, OHV, diesel engine. 23 hp gross rated, 18.5 hp net @ 2950
Fuel Capacity 6.5 gallons (25 liters) diesel fuel.
Fuel Capacity 6.5 gallons (25 liters) diesel fuel.
Traction Drive Hydrostatic, closed-loop drive, variable displacement 1.24 cu. in. (19.7 cc) piston pump, infinitely variable in both
Traction Drive Hydrostatic, closed-loop drive, variable displacement 1.24 cu. in. (19.7 cc) piston pump, infinitely variable in both
Ground Speed Mowing speed: 0-5 mph (0-8 km/h). Transport speed: 0-8 mph (0-13 km/h). Reverse speed 0-3 mph (0-4.8
Ground Speed Mowing speed: 0-5 mph (0-8 km/h). Transport speed: 0-8 mph (0-13 km/h). Reverse speed 0-3 mph (0-4.8
Hydraulic Oil Capacity/Filter Remote mounted, 2.3 gallons (8.7 liters) oil reservoir. 10-micron remote mounted spin-on filter.
Hydraulic Oil Capacity/Filter Remote mounted, 2.3 gallons (8.7 liters) oil reservoir. 10-micron remote mounted spin-on filter.
Tires/Wheels Two front traction drive tires, 20 x 10-8 tubeless, 4-ply rating. Rear steering tire and tube, 20 x 8-8, 4-ply rating.
Tires/Wheels Two front traction drive tires, 20 x 10-8 tubeless, 4-ply rating. Rear steering tire and tube, 20 x 8-8, 4-ply rating.
Main Frame Frame consists of formed steel, welded steel and steel tubing components.
Main Frame Frame consists of formed steel, welded steel and steel tubing components.
Brakes Service braking accomplished through dynamic characteristics of hydrostat. Parking brake is actuated by ratchet
Brakes Service braking accomplished through dynamic characteristics of hydrostat. Parking brake is actuated by ratchet
Steering Pinion and sector gear with solid drag link to rear steer wheel arm.
Steering Pinion and sector gear with solid drag link to rear steer wheel arm.
Controls Single foot operated traction pedal for forward and reverse and adjustable traction pedal stop. Hand operated
Controls Single foot operated traction pedal for forward and reverse and adjustable traction pedal stop. Hand operated
Gauges & Protection Systems Hour meter, 4-light warning cluster gauge: oil pressure, water temperature, amps and glow plug. High coolant
Gauges & Protection Systems Hour meter, 4-light warning cluster gauge: oil pressure, water temperature, amps and glow plug. High coolant
Electrical Features 12 volt, group 55, 585 cold cranking amps at 0° F (-18° C), 95 minute reserve capacity at 80° F (27° C). Standard
Electrical Features 12 volt, group 55, 585 cold cranking amps at 0° F (-18° C), 95 minute reserve capacity at 80° F (27° C). Standard
Overall Dimensions Wheel tread width: 54.5" (138 cm). Wheelbase: 55" (140 cm). Overall length (includes out front hoses):
Overall Dimensions Wheel tread width: 54.5" (138 cm). Wheelbase: 55" (140 cm). Overall length (includes out front hoses):
Certification The Reelmaster 2000-D complies with the American National Standards Institute (ANSI B71.4 - 1999) and
Certification The Reelmaster 2000-D complies with the American National Standards Institute (ANSI B71.4 - 1999) and
Warranty Two-year limited warranty, refer to Operator’s Manual for details.
Warranty Two-year limited warranty, refer to Operator’s Manual for details.
Ty p e Three hydraulically driven, balanced, 7" (17.8 cm) diameter reels. Cutting units interchangeable to all
Ty p e Three hydraulically driven, balanced, 7" (17.8 cm) diameter reels. Cutting units interchangeable to all
Reel Blade Options 5, 8, and 11-blade reels available for 27" (68.6 cm) cutting unit. 5 and 8-blade reels available for 32" (81 cm)
Reel Blade Options 5, 8, and 11-blade reels available for 27" (68.6 cm) cutting unit. 5 and 8-blade reels available for 32" (81 cm)
HOC Range Height of cut ranges
HOC Range Height of cut ranges
Cutting Width 72" (183 cm), or 85" (216 cm) width of cut dependent on cutting unit selection.
Cutting Width 72" (183 cm), or 85" (216 cm) width of cut dependent on cutting unit selection.
Clip Frequency/Backlapping Manually controlled variable reel speed for adjustment of clip frequency. Standard on-board backlapping.
Clip Frequency/Backlapping Manually controlled variable reel speed for adjustment of clip frequency. Standard on-board backlapping.
Bedknife-to-Reel Adjustment Single point adjustment (SPA) of bedknife to reel.
Bedknife-to-Reel Adjustment Single point adjustment (SPA) of bedknife to reel.
Rollers Full roller standard on rear of cutting unit. Front roller options: full, Wiehle®, sectional, or anti-scalp
Rollers Full roller standard on rear of cutting unit. Front roller options: full, Wiehle®, sectional, or anti-scalp
rpm, 51.9 cu. in. (850 cc) displacement. Isolation mounted. Forced lubrication with spin-on oil filter. Mechanical
rpm, 51.9 cu. in. (850 cc) displacement. Isolation mounted. Forced lubrication with spin-on oil filter. Mechanical
centrifugal governor. Distributor type fuel injection pump. Fuel filter/water separator with replacement filter
centrifugal governor. Distributor type fuel injection pump. Fuel filter/water separator with replacement filter
element. Heavy-duty remote mounted air cleaner. Side mounted industrial radiator, 7 fins per in.
element. Heavy-duty remote mounted air cleaner. Side mounted industrial radiator, 7 fins per in.
forward and reverse directions. Front mounted oil cooler and shuttle valve provide positive closed-loop cooling.
forward and reverse directions. Front mounted oil cooler and shuttle valve provide positive closed-loop cooling.
2WD model uses two high-torque hydraulic 12 cu. in. (197 cc) wheel motors. 3WD models include a third high-
2WD model uses two high-torque hydraulic 12 cu. in. (197 cc) wheel motors. 3WD models include a third hightorque hydraulic 12 cu. in. (197 cc) wheel motor. 3WD selector valve automatically shifts into 3WD when reels
torque hydraulic 12 cu. in. (197 cc) wheel motor. 3WD selector valve automatically shifts into 3WD when reels
are engaged.
are engaged.
km/h).
km/h).
hand lever.
hand lever.
throttle, starter switch, reel engagement switch, cutting unit lift lever, parking brake and seat adjustment.
throttle, starter switch, reel engagement switch, cutting unit lift lever, parking brake and seat adjustment.
temperature shutdown. Engine pre-heat incorporated into starter switch. Reel engage indicator light.
temperature shutdown. Engine pre-heat incorporated into starter switch. Reel engage indicator light.
control module provides machine electrical diagnostics. 40 amp alternator with regulator/rectifier. Seat switch,
control module provides machine electrical diagnostics. 40 amp alternator with regulator/rectifier. Seat switch,
PTO, parking brake, and traction interlock switches.
PTO, parking brake, and traction interlock switches.
96" (244 cm). Overall width: RM2000-D with 27" (68.6 cm) cutting units: 76.5" (194 cm), with 32" (81 cm)
96" (244 cm). Overall width: RM2000-D with 27" (68.6 cm) cutting units: 76.5" (194 cm), with 32" (81 cm)
cutting units: 89.5" (227 cm). Transport width: RM2000-D with 27" (68.6 cm) cutting units: 72" (183 cm), with
cutting units: 89.5" (227 cm). Transport width: RM2000-D with 27" (68.6 cm) cutting units: 72" (183 cm), with
32" (81 cm) cutting units: 85" (216 cm). Overall height (top of steering wheel): 44" (112 cm).
32" (81 cm) cutting units: 85" (216 cm). Overall height (top of steering wheel): 44" (112 cm).
European Community (CE) specifications with required ballast installed.
European Community (CE) specifications with required ballast installed.
Cutting Units
Cutting Units
three positions.
three positions.
cutting unit.
cutting unit.
1
1
/4"-13/4" (.6-4.4 cm) standard in floating position, 1/2"-25/8" (1.2-7 cm) in fixed position.
Maximum 3" (7.6 cm) height of cut (approximate) in floating position when configured with heavy duty Wiehle
Maximum 3" (7.6 cm) height of cut (approximate) in floating position when configured with heavy duty Wiehle
roller and optional front roller brackets.
roller and optional front roller brackets.
(for fixed position cutting units).
(for fixed position cutting units).
/4"-13/4" (.6-4.4 cm) standard in floating position, 1/2"-25/8" (1.2-7 cm) in fixed position.
®
®
Products depicted in this brochure are for demonstration purposes only.
Actual products offered for sale may vary.
©2003 The Toro Company, 8111 Lyndale Ave. S., Bloomington, MN 55420-1196
Part No. 03-072-T. Printed in U.S.A.
www.toro.comwww.toro.com