Toro 132-3147 Parts Catalogue
Form No. 0453-691
Arctic Cat® Prowler
Installation Instructions - Accessory Kit
Full Windshield Kit
(p/n 1436-829 & 1436-515)
NOTE: Read these Installation Instructions thoroughly before beginning the installation process. Retain
these Installation Instructions for future reference.
Kit includes:
Ref. No. p./n QTY DESCRIPTION
1 N/A 1 Windshield
2 2441-224 8 Rubber Clamp
3 * 8 Machine Screw
4 * 8 Flat Washer
5 * 8 Nut
6 * 1 Adhesive Foam
0453-691 1 Instructions
* Included in Hardware Kit (p/n 1436-573)
1. Thoroughly clean the installation area on the vehicle.
2. Apply Adhesive Foam (6) along the inside perimeter of the Windshield (1); then align windshield
with the hood and front ROPS bars. See Fig. 1.
Fig. 1
3. Place eight Rubber Clamps (2) on the forwardmost section of the ROPS making sure the flat side
of the clamp is facing toward the front of the vehicle.
4. Secure the windshield to the ROPS using eight
Machine Screws (3), eight Flat Washers (4), and
eight Nuts (5). Tighten until snug only.
CAUTION
Do not over-tighten the nuts. Damage to the windshield may occur.
UTV-095A
Printed in the U.S.A. ®™Trademarks of Arctic Cat Inc., Thief River Falls, MN 56701 1013
Loading...