Toro 125-5064 Installation Instructions

MulchingKit

g021232

30inTurfMasterWalk-BehindLawnMower

ModelNo.125-5064

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

FormNo.3376-352RevA

InstallationInstructions

Description

Mulchbafeassembly Carriagebolt(5/16x3/4inch) Flangelocknut(5/16inch) Flange-headbolt(1/4x1/2)

Nopartsrequired

InstallingtheMulchingKit

WARNING

Ifyouleavethewireonthesparkplug,someone couldaccidentallystarttheengine.Accidental startingoftheenginecouldseriouslyinjureyouor otherbystanders.

Disconnectthewirefromthesparkplugbeforeyou doanymaintenance.Setthewireasidesothatit doesnotaccidentallycontactthesparkplug.

Note:Determinetheleftandrightsidesofthemachine fromthenormaloperatingposition.

Qty.

Use

1 3 4 1

–

Installthemulchingkit.

Converttoside-dischargeoperation(asneeded).

1.Parkthemachineonalevelsurface.

2.Makesurethatallmovingpartshavestoppedandthe machinehascooled.

3.Removethespark-plugwirebeforestartingthese instructions.

4.Removethegrassbagorsidedischargechutefromthe machine,whicheveryourmachineiscurrentlyequipped with,alongwithitshardware.

5.Tiptheunitontoitsrightside.

6.Cleanoutanygrassbuildupfromundersideofdeck.

7.Removeandretaintheowcontrolbafefromthe frontofthedeck(Figure1)andhardware.

Registeratwww.T oro.com.

Figure1

Removingoriginalhardware

1.Nut

2.Flowcontrolbafe

3.Carriagebolt

8.InstallthemulchbafeassemblyasshowninFigure2.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3376-352*A

g021 184

Installingnewhardware

G019812

1.Flangelocknut(5/16inch)

2.CarriageBolt(5/16x3/4 inch)

Figure2

3.Rear-dischargeplug

4.Flange-headbolt(1/4x 1/2inch)

ConvertingtoSide-Discharge Operation

Toconvertthemowerbacktoside-dischargeoperation, completethefollowingprocedure:

1.Parkthemachineonalevelsurface.

2.Makesurethatallmovingpartshavestoppedandthe sparkplugwirehasbeendisconnected.

Note:Allowtheunittocoolbeforestartingthese instructions.

3.Removethebaggerfromtheunitifequipped.

4.Tiptheunitrearwardontoitshandle.

5.Cleanoutanygrassbuildupfromundersideofdeck.

6.Removethesidedischargecover.

7.Removethemulchbafeassemblyanditshardware.

8.Installstandardbladesiflow-liftbladeswereused.

9.Installtheowcontrolbafeanditshardware.

10.Installthesidedischargechuteanditshardware.

9.Installthedischargecoverontothemachine.

Note:Youwillhaveanextrabolt,astheange-head boltthatcomeswiththiskitwillreplaceoneofthe boltsthatmountthedischargecovertothemachine.

10.Installtherear-dischargeplugbygripingthehandle, raisingthereardeector,andinsertingitintothe rear-dischargechuteuntilthelatchlocksintoplace (Figure3).

1.Rear-dischargeplug

Figure3

2.Reardeector

DANGER

Anuncovereddischargeopeningwillallow objectstobethrowninthedirectionofthe operatororbystanders.Also,contactwiththe bladescouldoccur.Thrownobjectsorblade contactcancauseseriousinjuryordeath.

Neveroperatethemachinewithoutthe side-dischargedeectororside-discharge chuteinplaceandworkingproperly.

11.Installthebaggerorrear-dischargeplugfromthe machine.

WARNING

Ensurethateithertherear-dischargeplugor thegrassbaghasbeeninstalledbeforeyou turnonthemachine.Neverengagetheblades withouteithertherear-dischargeplugorthe grassbaginstalled.

11.Tightenallthefasteners.

12.Carefullyplacetheunitinthenormaloperating position.

13.Connectthespark-plugwire.

Note:Anoptionallowliftblade(P/N120-9500)maywork betterincertainmulchingconditions.Refertothemower operator’smanualforblademaintenance.