Toro 115-4462 Installation Instructions

RearHeight-of-CutKit

21inHeavy-DutyHi-VacWalk-BehindLawnMower

ModelNo.115-4462

InstallingtheKit

1.Raisetherearofthemowerofftheground.

2.Removetheendcapsfromthereardoorpivotshaft andremovethedoor.

3.Removetherearwheels.

4.Removetheretainingring,piniongear,key,washer, retainingrings,andwasherfromeachside.

Note:Ensurethatthespringforthekeyremainsin thekeywayontheaxle.

5.Removethesnapringoffeachpivotarmunderthe mowerhousing.

6.Slidethepivotarmsandthespringarmsofftheaxle.

Note:Discardthespringarms.

1.Pivotarm/Springarm assembly

FormNo.3360-213RevA

InstallationInstructions

Figure1

2.Clamp

7.Removetheoldangebushingsfromthemower housinganddiscardthem.

8.Removethehandle.

9.Removeanddiscardthesideplates.

10.Installthenewsideplates.

Note:Torquethesideplatefastenersto70–110 in-lb.

11.Installthehandle.

12.Applyageneral-purposegreasetotheoutsideface andinnerdiameterofthenewangebushings.

13.Installthenewangebushings.

14.Installanewspringarmontoeachpivotarm.

15.Installeachpivotarm/springarmassembly.

Note:Toinstallasnapringtoeachpivotarm, clampthepivotarm/springarmassemblytothe mowerhousing(Figure1).

16.Installaknobontoeachspringarmsothatthe cuppedsideistowardthemowerhousing.

17.Installthewasher,retainingring,washer,key,pinion gearandretainingringoneachside.

Note:Installthepiniongearsothatitratchets (freewheels)whenthetopofthegearrotatestoward therearofthemachineandengageswhenthetop ofthegearrotatestowardthefrontofthemachine. Thisallowsthewheeltoratchetorfreewheelwhen yourotateitforward.

18.Installtherearwheels.

Note:Torquethewheelhex-headboltsto250–400 in-lb.

19.Installthereardoorandsecureitwithendcaps.

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved