Toro 115-1015, 115-1016 Installation Instructions
Trim/DischargeSideAnti-ScalpRollerKit
48inTURBOFORCE
ModelNo.115–1015
ModelNo.115–1016
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
®
FloatingMowerforWalk-BehindMower
FormNo.3359-184RevA
InstallationInstructions
ProcedureDescription
1
2
1
InstallingtheRollerBracket
Partsneededforthisprocedure:
1Rollerbracket
3
Carriagebolt(3/8x3/4inch)
3
Flangenut(3/8inch)
Rollerbracket1
Carriagebolt(3/8x3/4inch)
Flangenut(3/8inch)
Anti-scalproller1
Bolt(3/8x4-1/2inches)
Longspacer1
Shortspacer
Flangenut(3/8inch)
Important:Ensurethatyouinstallthecarriage
boltswiththeboltheadsontheinsideofthe
mowerdeckandthenutsontheoutside.
Qty.
Use
3
3
1
1
1
Installtherollerbracket.
Installtheanti-scalproller.
Procedure
1.Preparetheinstallationsiteasfollows:
•Ifyouarereplacinganexistinganti-scalproller,
removetheroller,rollerbracket,andallfasteners
fromthemoweranddiscardthem.
•Ifyouareinstallingtheanti-scalprollerforthe
rsttime,locatethethreeholesonthereartrim
ordischargesideofthemower(dependingon
whichkityouareinstalling)andremovethethree
boltsandnutsthatareinstalledintheholes.
2.Installtherollerbrackettothemowerusing3
carriagebolts(3/8x3/4inch)andangenuts(3/8
inch)(Figure1).
©2007—TheT oro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
1.Rollerbracket
2.Carriagebolt(3/8x3/4
inch)
3.Flangenut(3/8inch)
4.Anti-scalproller
Note:Inserttheboltsothatitsheadistowardthe
outsideofthemower.
4.Securetherollerwithaangenut(3/8inch)
(Figure1).
Figure1
5.Bolt(3/8x4-1/2inches)
6.Shortspacer
7.Longspacer
2
InstallingtheAnti-ScalpRoller
Partsneededforthisprocedure:
1Anti-scalproller
1
Bolt(3/8x4-1/2inches)
1Longspacer
1
Shortspacer
1
Flangenut(3/8inch)
Procedure
1.Slidethelongspacerintotheanti-scalproller
(Figure1).
2.Placetheshortspacerinsidetherollerhubonthe
sideoftherollerwiththeshorthub(Figure1).
3.Placetherollerintotherollerbracketandpushthe
bolt(3/8x4-1/2inches)throughthebracket,short
spacer,andthelongspacer/rollerassemblyatthe
desiredheight(Figure1).
2
Loading...