Toro 112-9971 Installation Instructions
Form No. 3357-919 Rev B
Weight Kit
For 2007 and After Commercial Floating-Deck
Mid-Size Mowers
Model No. 112–9971
Installation Instructions
Note: Deter mine the left and right sides of the mac hine from the nor mal operating position.
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
1
2
3
No parts required
No parts required
Weight
Bolt (5/16 x 2 inches)
Bolt (5/16 x 3 inches)
Bolt (5/16 x 4 inches)
Bolt (5/16 x 5 inches)
Locknut (5/16 inch)
Washer (5/16 inch)
Description
Qty.
–
–
1
2
2
2
2
2
2
Use the weight for Performance.
Use the Weight with a TRU TRAK®
Sulky
Install the weight.
Use
© 2006—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com. Original Instructions (EN)
Printed in the USA.
All Rights Reserved
Step
1
Using the Weight for
Performance
No Parts Required
W ith the w eights installed in the r ear
position, the fr ont end of the machine can
rapidl y rise up when the mo w er is r emo v ed.
T his could cause serious injur y to y ou or
bystander s.
Suppor t the r ear of the machine when
r emo ving the mo w er fr om the car rier frame.
Procedure
• W eights are installed to impro v e handling,
balance and impro v e perfor mance . W eights
can be added, relocated or remo v ed to
create optimized perfor mance under different
mo wing conditions and for operator preference
( Figure 1 or Figure 2 ).
• It is recommended that w eights be added,
relocated or remo v ed one at a time until the
desired handing and balance is ac hiev ed.
Ex cessi v e w eight changes can ef fect
handling and operation of the machine.
T his could cause serious injur y to y ou or
bystander s.
Mak e w eight changes is small incr ements
onl y .
Ev aluate the mo w er after each w eight
change to ensur e the machine can be
operated safel y .
T he follo wing table indicates the position and
n umber of the w eights fur nished with the mo w er .
Number of Weights Furnished with Mower
Deck size
36 0
40
48 2
52 3
60
Gear Driven Mowers
Number
of
Weights
1 Front 1 Front
Not Available
Weight
Position
None 1 Front
Rear
Rear 1 Rear
Hydraulic Driven
Mowers
Number
Weights
of
0
0
Weight
Position
None
None
Step
2
Using the Weight with a TRU
TRAK
No Parts Required
Procedure
• Any rear w eight m ust be remo v ed when a TR U
• As a g eneral r ule , a w eight shift of
• Use the follo wing table to deter mine the
Number of Weights recommended with the TRU TRAK
Sulky
Deck size
®
Sulky
TRAK
®
Sulk y is installed.
appro ximately 45 pounds (20.4 kg) is needed
to compensate for the sulk y attac hment and
the w eight of the operator on the rear of the
mac hine .
n umber of front w eights recommended to be
installed with a TR U TRAK
Gear Driven Mowers
Number
of
Weights
36 3
40
48
52 0 2
60
4 Front 4 Front
1 Front
Not Available
Weight
Position
Front 4 Front
®
Hydraulic Driven
Mowers
Number
Weights
Sulk y .
of
3
1 Front
Weight
Position
Front
Front
®
2
Loading...