![](/html/c0/c0b5/c0b578bce22384c8829aed63dca492b0303ebf89fdf10b9c47a7f2b4a5dace17/bg1.png)
Manufacturer: Shenzhen Topband Co., Ltd
Package List
Power Bank x1
Manual x1
WDC07
WDC07
Wireless Charging Power Bank with charging Dock
V
WDC07
Power bank
power bank
User Manual
Wireless Charging power bank with charging dock
PD18W + 10000mAh
Model No: WDC07
FCC ID: 2ADDW-WDC07
Portable Power Bank charge the smartphone by cable
will automac turn off during charging the device,
press the buon to check the power bank power.
or Type-C ,PD18W is available for individual
USB or Type ouput , not available for USB and
Type-C output at the same me
on and hold 2s, then
Onput 2
Onput 1
Wireless Charging Power Bank with charging Dock
Power of the power bank
Charger the Power Bank
Power Bank
Power Bank
Power Bank
(PD , 5V/3A,9V/2A,12V/1.5A)
power bank
power bank
Power Bank
and hold 2s, then
will automac turn off during charging the device
LED hold 2s, then will automac
all turn off (5 LEDs) when charging
the device
or 9V/2A
power bank
Power Bank
Type-C Input
Type-C Output
USB Output
Type-C Input
4.5V/3A
10000mAh/37Wh
5V/3A, 9V/2A, 12V/1.5A
5V/3A, 9V/2A, 12V/1.5A
(PD 18W max)
5V/3A, 9V/2A (PD 18W max)
75(W)x152(L)x16(T)mm
5V/3A, 9V/2A, 12V/1.5A
5V/3A, 9V/2A
88(W)x92(L)x25(T)mm
power bank
Power Bank
there have 2 ways output :
1.Wireless charging funcon is available, then the
USB output funcon will be shut off;
2.The USB output funcon is available ,then the
wireless charging funcon will be shut off
WDC07
WDC07
WDC07
WDC07
WDC07.
![](/html/c0/c0b5/c0b578bce22384c8829aed63dca492b0303ebf89fdf10b9c47a7f2b4a5dace17/bg2.png)
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.