Topband TB WDC02 User Manual

WIRELESS CHARGER&Portable

Power

Thanks for choosing our wireless charging power bank!
This is a smartphone wireless charging power bank for
Samsung Galaxy S8, S8+, iPhone 8, iPhone 8 Plus,
iPhone X, Qi-enabled devices and other digital devices.
Please kindly read the user manual before using.

Wireless Coil 1

Wireless Coil 2

Method of use

Three charging ways
Whether your smartphone is placed horizontally or vertically,
even lying down without cell phone holder, charging is still
perfect.

User Manual

Model NO.: TB-WDC02

Instructions

Connect USB Plug into Compatible Power Supply
(for Optimal Charging use Min 2A Charing Supply),
or PC/Laptop.

Instructions

Enables pass-through charging while connected to a power
source. Power is sent to your smartphone first, and then the
TB-WDC02 recharges itself.When TB-WDC02 is in the
charging mode, the power indicator shows the charging status
in different signs:

Signs：

OFF ON BLINK

0%-25%

LED1 BLINK

25%-50%
LED1 ON

LED2 BLINK

50%-75%

LED1~LED2

ON LED3 BLINK

75%-99%

LED1~LED3

ON LED4 BLINK

100%

LED1~LED4 ON

Product Outline

Wireless Charging
Power Bank

Charging Dock

Short press the button for power remain

The power indicator will turn green（standby or no device
under after long press the button for 3 seconds）

GREEN

Place the mobile with wireless function when the light is under
green. The power indicator will turn blue when charging

BLUE

When charging the stand, the power indicator will remain
white

WHITE

Contact

USB-C Input

Power Bank
LED Indicator

Non-slip
Silicone Pad

LED Indicator

USB Output
Power Button

Wireless Charging
LED Indicator

USB Cable

Contact

1 32

Product Specifications

Charging Dock
Input: DC 5V/2A, DC 9V/1.67A max
Power Bank
Rated capacity: 5000mAh/18.5Wh
Input: DC 5V/2A
USB Output: DC 5V/2.4A max
Wireless Charging
Output: 10W
Transmission Distance: ＜8mm
Conversion Efficiency: ≥72%

Size

Wireless Charging Power Bank ：

134.15x68x14mm

Charging Dock：

74.9x84.20x21 mm

Note

When TB-WDC02 is not connected to power
source,priority USB output port charging.USB
output port charging and Qi wireless charging
couldn't enable at the same time.
When TB-WDC02 is connected to power source,
USB output port charging will be disabled.

Wireless Charging
Power Bank

Wireless Charging
Power Bank
with charging dock

Wireless Charging
Power Bank
with charging dock

Products Supplied

Wireless Charging Power Bank
Charging Dock
User Manual

Attention

Please keep the charger away from water and other
liquid.
Please make sure it is not connected power supply
if you need to clean the charger.
Using environment temperature remains 0-45℃.

4 5 6 7

y

FCC ID: 2ADDWTB-WDC02
Shenzhen Topband Co.,Ltd

Model name: WIRELESS CHARGER&Portable Power
Model No.: TB-WDC02

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that ma

Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment。

Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.

cause undesired operation.