Topband TB1206 User Manual

TB1206 Product specification

Revision note

Date

2018-12-18 V1.0

Ve rsi on

Description

The f irst version

ShenzhenTopbandCo.,Ltd.

CONTENT

CONTENT

1. OVERVIEW ........................................................................................................................ 1

1.1 Product features .................................................................................................................... 1

1.2 Application field ................................................................................................................... 2

2. ELECTRICAL PARAMETERS .......................................................................................... 2

2.1 working conditions ............................................................................................................... 2

2.2 Power consumption parameters ........................................................................................... 3

3. RADIO FREQUENCY CHARACTERISTICS .................................................................. 4

3.1 Radio frequency (rf) basic characteristics ............................................................................ 4

3.2 Output power ........................................................................................................................ 4

3.3 The adjacent channel inhibition ........................................................................................... 4

3.4 Receiving sensitivity ............................................................................................................ 5

4. MODULE INTERFACE ...................................................................................................... 5

4.1 Size package ......................................................................................................................... 5

4.2 Pin definition ........................................................................................................................ 6

5. ANTENNA INFORMATION .............................................................................................. 7

5.1 Type of antenna .................................................................................................................... 7

5.2 Reduce the antenna interference .......................................................................................... 7

5.3 An external antenna connector ............................................................................................. 8

6. ENCAPSULATES INFORMATION AND PRODUCTION GUIDANCE ........................ 8

6.1 Mechanical dimensions ........................................................................................................ 8

6.2 Production guide .................................................................................................................. 9

6.3 Reflow soldering temperature curve .................................................................................. 10

6.4 Peripheral wiring advice ..................................................................................................... 11

APPENDIX - DESIGN INFORMATION ................................................................................ 11

FCC COMPLIANCE ............................................................................................................... 12

I

TB1206 Product specification

1.Overview

TB1206 is a low power consumption embedded Wi-Fi module ,developed by the
Shenzhen Topband Co., ltd. It consists of a high level of integration of wireless RF chip
ESP8266 and small amounts of peripheral components，With built-in wi-fi network
protocol stack and rich library functions.TB1206 is embedded ultra-low power
consumption of the 32-bit RISC processor，With 16 bits simple model， CPU clock
speeds up to 160 MHZ，supports real-time operating system RTOS，Can use up to 80%
of the capacity for application programming and development。

TB1206 integrates all wi-fi MAC and complete TCP/IP protocol function library，
The user can use the module for networking function added to existing equipment，
Also can build an independent network controller ， and develop Wi-Fi

product embedded to satisfy his needs。

1.1 Product features

 SOC features

Built-in ultra-low power consumption 32-bit MCU， The main frequency

supports 80 MHZ and 160 MHZ，supports RTOS

Built-in TCP/IP protocol stack
Built-in 1 road 10 bits high precision ADC

 Rich peripheral interfaces

2 X UART

1 X ADC

1 X En

1 X Wake up the pin

1 X HSPI

1 X I2C

1 X I2S

Most 11 X GPIOs

 Wi-Fi connectivity

1

TB1206 Product specification

Supports 802.11 b/g/n.
Supports the STA/AP/STA + AP mode
Supports WPA/WPA2 security mechanism.
Supports WEP/TKIP/AES encryption type.
Supports the AT remote upgrade and the clouds OTA upgrade.
Supports SmartConfig and AP two types of Matching network (Including

Android and iOS devices).

1.2 Application field

Intelligent building
Smart home
Intelligent security

 Industrial wireless control

The baby monitor
 Wise medical
 Wise energy

2.Electrical parameters

2.1 working conditions

Table 2-1 normal working conditions

Minimum

Parameter

Working voltage

Working

temperature

value

3.0 3.3 3.6 V

-20 - 85

Typical

value

Maximum

value

Unit Remark

℃

Working

humidity

Storage

temperature

Electrostatic

10 - 90 %RH

-20 - 85

- - 2 KV TAMB=25℃

2

℃

discharge

T

voltage ( Human

body model)
Electrostatic

discharge

voltage

( Machine

model)

- - 0.5 KV TAMB=25℃

2.2 Power consumption parameters

Table2-2 power consumption parameters

TB1206 Product specification

Mode

Tx802.11b，CCK 11Mbps，POUT=+17dBm

Tx802.11g， OFDM 54 Mbps，POUT =+15dBm

Tx802.11n，MCS7，POUT =+13dBm

Rx 802.11b， length of the packet 1024 byte，

-80dBm

Rx 802.11g， length of the packet 1024 byte，

-70dBm

Rx 802.11n， length of the packet 1024 byte，

-65dBm

Modem-sleep①

Light-sleep②

Minimum

value

- 170 - mA

- 140 - mA

- 120 - mA

- 50 - mA

- 56 - mA

- 56 - mA

- 15 - mA

- 0.9 - mA

ypical

values

Maximum

values

Unit

Deep-sleep③

Power outages

Note ①: Modem-Sleep mode is used for scenes where the CPU needs to work all the time,

such as applied in PWM or I2S and so on. When Wi-Fi keeps connective, and if there is no

data transmission, shut down the circuit of Wi-Fi Modem to save power according to 802.11

standard ( e.g U-APSD ). For example, while it with DTIM3, maintain sleep for 300ms, and

receive Beacon package from AP in the awake interval time for 3ms, the current consumption

would be 15mA.

Note ②: Light-Sleep mode is used for applications where the CPU is intended to be paused,

- 20 - μA

- 0.5 - μA

3