Toner Cable RX8200 User Manual

RX8200

Advanced Modular Receiver

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Advanced Modular Receiver

Broadcasters' requirements for differing equipment configurations
and the many and varied ways in which receivers are used is dri­ving the need for a flexible receiver platform. The Ericsson
RX8200 Advanced Modular Receiver has been designed to pre­cisely meet these requirements.

By allowing each individual RX8200 to be configured and tailored
to the user’s precise needs the perfect balance of functionality and
cost can be achieved, resulting in a unit having only the required
features without the additional expense of superfluous connectivity
or functionality. The RX8200 offers a vast and sophisticated array
of configuration possibilities allowing it to cover a broad range of
applications. The RX8200 can be tailored to standard definition or
high definition uses with MPEG-2 or MPEG-4 decode technology
in both 4:2:0 and 4:2:2 modes while connectivity into the receiver
is achieved with DVB-S2 satellite, IP, ATM and ASI options.

The high powered processing capabilities of the RX8200 enable
the unit to be simply and easily upgraded in the field with addition­al software options to increment the functionality at any point after
initial installation.

PRODUCT OVERVIEW

A New Receiver With an Unrivalled Pedigree

The RX8200 Advanced Modular Receiver is Ericsson’s fourth gen­eration receiver that builds on the success and knowledge of pre­vious generations of products to ensure an unrivalled level of qual­ity and reliability.

Increased Distribution Capacity and Efficiency

The RX8200 Advanced Modular Receiver, in combination with
Ericsson’s MPEG-4 AVC Encoders and DVB-S2 PREKOR™
Satellite Modulators achieves a level of bandwidth efficiency that is
unrivalled allowing more HD services per transponder compared
with any competing solution.

Wide Choice of Inputs and Outputs for Enhanced Connectivity

The RX8200 can be integrated into a variety of system architec­tures, including ASI, IP and satellite delivery systems through a
choice of input and output modules. The receiver offers a multi­tude of IP, audio and video outputs for high quality delivery to all
major onward networks.

Simplified Control and Lower Cost of Operations

Organizations with large populations of RX8200 Advanced
Modular Receivers or other Ericsson receivers can simplify control
by integrating with the Director by Ericsson control system.
Director provides remote, over-air, single-view control from a cen­tral location, reducing the need for on-site local operators.

BASE UNIT FEATURES

RX8200 – Advanced Modular Receiver
(RX8200/BAS, FAZ 101 0113/1)

The following features are available as standard:

• 1x ASI input transport stream input

• Front panel control

• Web browser and SNMP remote control

• Alarm relay and SCTE 35 controlled contact closures for
ad-insertion signaling

• Many sophisticated, additional hardware and software
based modules available as options

RX8200 – Advanced Modular Receiver
(RX8200/BAS/2, FAZ 101 0113/2)

Functionality as above with the addition of:

• Base unit includes MPEG-2 and MPEG-4 4:2:2 decoder
card (functionality enabled via additional license keys)

INPUT OPTIONS

The RX8200 Advanced Modular Receiver has a single ASI input
as standard and can be configured with one additional choice of
inputs type.

Satellite Input Options

The RX8200 satellite input modules come with DVB-S QPSK sup­port as standard. The unit can optionally be licensed to support
the new highly efficient DVB-S2 satellite transmission standard.

DVB-S2 Capable Satellite Demodulator
(RX8200/HWO/DVBS2, FAZ 101 0113/5)

• 4x L-band inputs

• DVB-S QPSK demodulation

• DVB-S2 QPSK, 8PSK demodulation with license keys

Second Generation DVB-S2 Capable Satellite Demodulator
(RX8200/HWO/DVBS2/2, FAZ 101 0113/6)*

• 4x L-band inputs

• DVB-S QPSK demodulation

• DVB-S2 QPSK, 8PSK, 16APSK demodulation with license
keys

• DVB-S2 multi-transport stream capability with license key

DVB-S2 QPSK License
(RX82XX/SWO/DVBS2/QPSK, FAZ 101 0113/32)

• Adds DVB-S2 QPSK capability to DVB-S2 input option card

DVB-S2 8PSK License
(RX82XX/SWO/DVBS2/8PSK, FAZ 101 0113/30)

• Adds DVB-S2 QPSK, 8PSK capability to DVB-S2 input
option card

DVB-S2 16APSK License
(RX82XX/SWO/DVBS2/16APSK, FAZ 101 0113/29)

• Adds DVB-S2 QPSK, 8PSK and 16APSK capability to DVB­S2 input option card

• Second generation DVB-S2 card (RX8200/HWO/DVBS2/2,
FAZ 101 0113/6) only

DVB-S2 VCM License
(RX82XX/SWO/DVBS2/VCM, FAZ 101 0113/56)

• Provides DVB-S2 Multi-transport stream input capability

• Single transport stream output from receiver

• Second generation DVB-S2 card (RX8200/HWO/DVBS2/2,
FAZ 101 0113/6) only

DVB-S2 Low Symbol Rate License
(RX82XX/SWO/DVBS2/LSYM, FAZ 101 0113/31)

• Enables DVB-S2 symbol rate of 1 Msym/s to 5 Msym/s

IP Transport Stream Input Options

The RX8200 may be configured with IP transport stream input
connectivity via the following options.

100/1000BaseT Input
(RX8200/HWO/IP/GIGE, FAZ 101 0113/12)

• MPEG transport stream over IP

• 2x 100/1000BaseT input

• Very low latency

SMPTE 2022M Pro-MPEG FEC License

(RX8200/SWO/IP/PROMPEG, FAZ 101 0113/37)

• Enables SMPTE 2022M Pro-MPEG FEC capability for the IP
input card

• Requires IP input card

G.703 ATM Input Option

The RX8200 may be configured with G.703 ATM connectivity.

G703 ATM Input (RX8200/HWO/G703, FAZ 101 0113/8)

• E3 or DS-3 inputs

• 34 Mbps or 45 Mbps rates

Input Redundancy

The RX8200 Advanced Modular Receiver offers as standard auto­matic redundancy switching between ASI input and the additional
input option. This redundancy switching capability may be further
enhanced with the following option.

Null Packet Detection Redundancy Switching
(RX82XX/SWO/NULL, FAZ 101 0113/48)

• Redundancy switching from primary to secondary input
triggered by presence of null packets in the incoming stream

• User definable percent of null packets to trigger redundancy
switch

CONFIGURATION PHILOSOPHY

The RX8200 Advanced Modular Receiver offers ultimate config­urability at the point of order allowing the unit to be tailored to your
precise needs incorporating just the functionality you require thus
allowing an individual and optimal balance of price against func­tionality.

To configure your individual receiver follow this simple configura­tion philosophy to allow easy selection of all the features that you
require.

ERICSSON RX8200 ADVANCED MODULAR RECEIVER

VIDEO AND TRANSPORT STREAM OUTPUT
OPTIONS

The RX8200 Advanced Modular Receiver offers the option of an
SD only or HD and SD capable video output card. Both video out­put card options also provide ASI transport stream output connec­tivity. IP transport stream output capability may additionally be
specified.

SD Video and ASI Output
(RX8200/HWO/SD, FAZ 101 0113/18)

• 2x composite video outputs

• 2x switchable ASI/SDI outputs

3 Gbps HD and SD Video and ASI Output
(RX8200/HWO/HD/3G, FAZ 101 0113/10)

• 1x composite video output

• 1x RGB/YPrPb analog video output

• 3x switchable ASI/SDI/HD-SDI outputs

• 3 Gbps HD-SDI output compatible with MPEG-4 4:2:2
1080p50/60 capability

IP Transport Stream Output
(RX8200/HWO/IP/OUT, FAZ 101 0113/14)

• Encapsulation of transport stream output into IP multicast

• MPTS or single or multiple SPTS output stream with licence key

• 2x Gigabit Ethernet RJ-45 interfaces capability

CONDITIONAL ACCESS OPTIONS

The RX8200 Advanced Modular Receiver supports many types of
widely used conditional access systems to allow for secure trans­mission of content. By default the RX8200 is fitted with the capa­bility to accept a Conditional Access Module. Alternatively the
RX8200 may be ordered with the capability to directly accept NDS
BSkyB CA smart cards.

Director by Ericsson
(RX8200/SWO/DIR, FAZ 101 0113/27)

• Director CA

• Director over-air control

• Director over-air software downloads

Director by Ericsson Multi-service Decryption
(RX8200/SWO/DIR5/MSD, FAZ 101 0113/28)

• Multi-service decryption for Director by Ericsson DVB Common
Interface (RX8200/SWO/CI, FAZ 101 0113/25)

• Enables support for Conditional Access modules

DVB Common Interface Multi-service Decryption
(RX8200/SWO/MSD, FAZ 101 0113/46)

• Multi-service decryption DVB Common Interface

BISS CA (RX8200/SWO/BISS, FAZ 101 0113/23)

• BISS Mode 1 and BISS Mode E descrambling

BISS Multi-service CA
(RX8200/SWO/BISS/MSD, FAZ 101 0113/24)

• Multi-service decryption for BISS

NDS BSkyB CA (RX8200/HWO/BSKYB, FAZ 101 0113/4)

• Single service decryption for BSkyB services

• Mutually exclusive with other CA types

Ericsson RAS CA (RX8200/SWO/RAS, FAZ 101 0113/52)

• Ericsson RAS 1

Ericsson Signal Protection CA
(RX8200/SWO/SP, FAZ 101 0113/58)

• Ericsson Signal Protection CA

SECURITY OPTIONS

Password Protection of Web Browser
(RX8200/SWO/PW, FAZ 101 0113/51)

• Protects Web browser from malicious or accidental changes

STREAM PROCESSING OPTIONS

The RX8200 Advanced Modular Receiver offers as sophisticated
choice of transport stream processing capability allowing the unit
to operate as a cost effective network interface into a headend or
transport stream turn-around system

Single Service Filtering
(RX8200/SWO/SING/SERVFILT, FAZ 101 0113/53)

• Filter multiple services to output a single service

• Re-map PIDs for the outgoing service

Multi-Service Filtering
(RX8200/SWO/MULT/SERVFILT, FAZ 101 0113/47)

• Filter N multiple incoming services to M outgoing services

• Re-map PIDs for a single service

• CBR MPTS transport stream output

• Service splitting for multiple IP SPTS output

VIDEO DECODING OPTIONS

The RX8200 Advanced Modular Receiver provides capability to
decode every video compression standard in use today including
support for the highest quality MPEG-4 AVC 4:2:2 standard.

In order to offer ultimate cost effectiveness and flexibility 4:2:2 and
4:2:0 video standards are ordered separately.

4:2:0 Decode Options

MPEG-2 SD 4:2:0 Decoding
(RX8200/SWO/MPEG2/SD, FAZ 101 0113/45)

• Enables MPEG-2 SD 4:2:0 decoding

MPEG-2 HD 4:2:0 Decoding
(RX8200/SWO/MPEG2/HD, FAZ 101 0113/44)

• Enables MPEG-2 SD and HD 4:2:0 decoding

MPEG-4 AVC SD 4:2:0 Decoding
(RX8200/SWO/MP2/MP4/SD, FAZ 101 0113/40)

• Enables MPEG-2 and MPEG-4 AVC SD 4:2:0 video decoding

MPEG-4 AVC HD 4:2:0 Decoding
(RX8200/SWO/MP2/MP4/SD/HD, FAZ 101 0113/41)

• Enables MPEG-2 SD and HD, MPEG-4 AVC SD and HD 4:2:0
decoding