Toner Cable RTC 360 User Manual
Cable Pro RTC 360 and F-Conn Connectors
Telephone: Nationwide: Fax: E-mail: Internet:
215-675-2053 800-523-5947 215-675-7543 info@tonercable.com http://www.tonercable.com
12/00
969 Horsham Road
Horsham, Pennsylvania 19044 USA
Cable Pro RTC 360
A True 360°
Round Crimp
• High Quality Stainless Steel Tool
• Makes Standard F-Connector
Universal (Works with F-Conn,
Gilbert, LRC, Pyramid and others)
• 360° Electrical Integrity
• Water-tight Crimp
(Passes SCTE-IPS #TP013)
• Greater Pull-out Strength
(Exceeds minimum pull out of
SCTE-IPS #TP-400)
• Soon Available for RG7 & 11
Cable. Call for details
• Reduces Radiation Leakage
• Also Available with Ratchet
Mechanism
• By reducing the outside and inside diameters by an average of .72 thousandths we achieve the same
reduction in area as you get using a .360 Hex Crimp Tool and a universal connector. This reduction
in area is for the full 360° circumference of the connector (NOT JUST 6 POINTS). The results are an
excellent water and radiation seal while providing a strong connection with improved electrical properties that maintains a 75 ohm impedance.
• The RTC 360 Crimp Tool is made of hardened stainless steel and utilizes a die to extrude the F-
Fitting into a 360° true round tapered crimp.
• RG-6 cable uses a .342 I.D. connector with a .370 to .375 O.D. This crimp is universal from quad-
shield down to 60% braid.
• RG-59 cable uses a .312 I.D. connector with a .370 to .375 O.D. (Ringed connectors work very well).
This crimp is universal from quad-shield down to 53% braid.
See back for connector ordering information.
Telephone: Nationwide: Fax: E-mail: Internet:
215-675-2053 800-523-5947 215-675-7543 info@tonercable.com http://www.tonercable.com
Toner Cable Equipment, Inc. Specifications Subject To Change Without Notice.
Cable Pro RTC 360 and F-Conn Connectors
FFCC FF-CCOONNNN IINNDDUUSSTTRRIIEESS RRGG-66 && RRGG-5599 FF CCOONNNNEECCTTOORRSS
FEATURES
1. Internal Rings are drawn into smaller rings around the outer jacket. This forms
two small, half O-Rings out of the cable’s outer jacket (see Figure 1).
2. The internal post is extended to provide a larger surface area at the crimp point
(See Figure 2).
3. This reduction provides space for the braid to be folded back. The braid cannot
reach the crimp area (Figure 1), and therefore the O-Ring seal is preserved. By
keeping the loose braid out of the crimp area, we reduce the chance of uneven
braid distribution that might cause an impedance problem. The 360° crimp provides exceptional pull out strength while creating a 360° tight electrical connection (See Figure 3).
WR SERIES
WRO SERIES
The WRO Series incorporates an
O-Ring in the nut for added sealing
against moisture and dirt.
CONNECTOR I.D. O-RING CABLE SIZE UNIVERSAL
RG-6 NR .342 NO QUAD TO 67% YES
RG-6 NRO .342 YES QUAD TO 67% YES
RG-6 WR .336 NO TRI TO 67% YES
RG-59 WR .312 NO QUAD TO 53% YES
RG-6 WRO .336 YES TRI TO 67% YES
RG-59 WRO .312 YES QUAD TO 53% YES
Connectors to use with CABLE PRO RTC-360 Crimper
Loading...