Toner Cable RS-1906S User Manual

Specifications Subject To Change Without Notice Rev 06-11 ©Toner Cable Equipment, Inc.

RS Series

Black Ventilated Rack Shelves

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

RS-1906S

RS-1915S

RS-2915S

RS-3915S

The Toner RS series of rack shelves are industry standard 19” rack shelves for mounting items in relay racks or
cabinet type racks. The shelves are available in several sizes, 1RU (1.750”) 2 RU (3.50”) and 3 RU (5.25”) and all
are of a slotted shelf design for both ventilation and mounting of equipment. These equipment shelves (except the
RS-1906S) feature a 3/16” lip at the front and back for increased strength and also to prevent equipment from
falling off. All the shelves are black powder coated. A optional SRB-1 bracket is available to hold DSS type satellite
receivers upright. The bracket engages in the slots in the rack shelf.

RS-SRB-1

Optional Receiver
Bracket to Hold
DSS Receiver

*Patent Pending

Features

• Standard 19” Wide Rack Shelves

• 1RU, 2RU, and 3RU Sizes

• All with Ventilation / Mounting Slots

• 16 Gauge Cold Rolled Steel (RS-1906S, RS-1915S, RS2915S)

• 14 Gauge Cold Rolled Steel (RS-3915S)

• Black Powder Coated Finish

• Standard EIA Mounting

Model Size
RS-1906S 1RU - 1.75 H x 17.625” W x 6”D
RS-1915S 1RU - 1.75 H x 17.625” W x 15”D
RS-2915S 2RU - 3.5 H x 17.625” W x 15”D
RS-3915S 3RU - 5.25 H x 17.625” W x 15”D
RS-SRB-1 Optional Receiver Bracket to Hold Multiple DSS

Receivers on Edge