Toner Cable QMOD-YPB2 User Manual
QMOD-<3% HDTV Modulator
Applications
HD/SD Cable Receivers
HD/SD Satellite Receivers
HD/SD Media Sources
Sources
Two Component inputs; 1080i, 720p, 480p, 480i
Two Composite/CC video inputs for encoding, captioning, or EAS use
Two sets of stereo and SPIDF coax audio inputs
Encoding
Creates a high-denition 720p/1080i MPEG-2 stream for broadcast
Accepts stereo, PCM, or pass-through AC-3 audio, can create two MTS
sub-channels for each input, supporting two languages each
Includes captioning from Line 21 data on composite video inputs
Flex encoding compensates for slightly off-frequency video, or 60/30 Hz
sources such as consumer HD cameras
Output
Delivers a fully agile QAM 64/256 digital cable channel 2-135
Up to 270 HD Programs/Channels per system
Streams IPTV from GigE Ethernet port
Distributes channel over an on-site broadband cable system with
adjustable output level to 29 dBmV, compatible with all cable format
broadband systems
Operation
Sets up with front-panel buttons and easy to use menus, including inputs,
encoding, channel, and RF options.
Onboard Web page for setup and monitoring
Control with IP Telnet commands
Saves power and rack space using efcient design
Includes compact switching power supply
Mounts in optional 1RU single (RK1) or dual (RK2EZ) 19” rack kits
Meets RoHS safety and California energy standards
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The QMOD-YPB2 continues the QMODTM track
record for quality and innovation, setting a
new benchmark for features and performance,
converting two HD Component sources into one
HD RF channel.
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
QMOD-<3%+'79Modulator
Specifications
Feature
General Integrated HD/SD A/D converter/modulator
Physical 8.5” [216mm] wide x 1.73” [62mm] height (1RU) x 6.0” [153mm] deep
1.5 lbs [0.68kg]
+32° to 122° F operating temperature, fan cooled
Rack mounting for one or two units side-by-side optional (RK1, RK2EZ)
Encoding MPEG2 Profile:MP@HL for HD, MP@ML for SD
Auto-syncs to1080i, 720p, 480p, and 480i resolution, depending on input
Compensates for 60/30 Hz Component sources
Video Encoding bitrate 11, 13, 15, 18 or 25 Mbps (18 or less for dual-channel)
AC-3 (Pass-through or stereo) or MPEG1, Layer 2 audio
MTS Dual-language capability
Dual-channel operation carries 2 full HD sub-channels
Modulation Switchable 64/256 QAM, J83 Annex B, Interleaving Modes (128,1)
MER 38 dB typical
Compliance FCC Class B, ROHS, meets California standards
Front Panel Power button
Select and directional buttons for menu setup
Menu LCD, 2 lines of 20 white characters each
Back Panel
Power
EAS
2.1mm coaxial jack (inside center conductor positive)
1.1A maximum, 11.5 to 13.5 VDC, 12 VDC typical
Captive-screw terminal with 3 GPI Pins for momentary or latching control
Ethernet RJ-45 GigE Ethernet: Web page, control, streaming video, firmware updates
Video Inputs
Two Component Y, Pb, Pr RCA inputs (1080i/720p/480p/480i), 59.94/60, 29.97/30 Hz
Composite Video: RCA female (480i), 29.97 Hz, also used for Line 21 captioning data
Audio Inputs
Two Digital SPDIF Coax RCA jacks, PCM/AC-3 48K sample rate
Two stereo analog RCA inputs
Inputs assignable to video inputs
RF ‘F’, female, 75 ohm impedance
Agile, channels 2-135 (48-860 MHz), standard, HRC, or IRC spacing
6 MHz bandwidth fits any open channel without interference to adjacent channels
1 KHz resolution, +/- 30 ppm accuracy, +/- 35 ppm stability
29 dB typical output power, attenuated in 5 steps, approx 4 dB
Includes Compact PS12-1.5 switching power supply, 1.5A 12 VDC, fits power strip
Options RK1 Single Rack Kit
RK2EZ Dual Rack Kit
Specifications Subject To Change Without Notice Rev 06-13 © Toner Cable Equipment, Inc.
Loading...