Toner Cable QMOD-SDI User Manual

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Applications

HD-SDI

Digital Signage

HD/SD Cable Receivers

HD/SD Satellite Receivers

HD/SD Media Sources

QMOD HDTV Modulators

CR QMOD™ technology is opening the door to new HDTV
applications. Innovative in design and value, QMOD™ HDTV
Modulators enable cost-effective distribution of digital sig­nage and HD subscriber sources using existing broadband
coax cabling in sports, retail and entertainment facilities, cor­porate offices, colleges, schools and worship centers.

• Create your own on-site HDTV broadband distribution sys­tem using a variety digital signage, HD, SD, and AV
sources

• Distribute digital signage, satellite, cable, and media as
HD digital cable channels over existing broadband wiring

• View HD sources at any destination using HDTV displays
or tuners

QMOD-SDI HD-SDI Modulator

• HD/SD-SDI auto-syncs video input with embedded audio

• HD Component, and S-Video/Composite video inputs

• Switchable between SDI, Component, and video

QMOD-HDSC HDTV Scaler Modulator

• In-stream scaler for RGBHV/Component inputs up to
1080p

• Formats and positions video for broadcast

• Converts PAL HD video to NTSC

• SD S-video and composite video

• Buffered RGBHV Out for monitoring RGB input

• Switchable between RGB/Component and composite
video

QMOD-HD HDTV Modulator

• HD RGBHV, Component, and S-Video/Composite video
inputs

• Switchable between RGBHV/Component and video

Shared Features

• Employs pro-grade HD encoding by NTT that minimizes
artifacts for motion video and signage “tickers”

• Merges audio with video from stereo, digital optical and
coax inputs

• Digital coax/optical and stereo audio inputs

• Switches via GPI inputs to present EAS AV broadcasts

• Creates an HD 720p/1080i or SD 480p/480i MPEG2
stream with MPEG1 stereo audio for broadcast

• Delivers a fully agile QAM 64/256 digital cable channel 2­135

• Amplifies for distribution over an on-site broadband cable
system with adjustable output level to 29 dBmV

• Sets up with front-panel buttons and easy to use menus,
including inputs, encoding, channel, and RF options

• Fast processing - starts up in less than 4 seconds

• Integrates with RS-232 control and feedback with simple
ASCII commands

• Saves power and rack space using efficient design, fan­free cooling, and compact enclosure

• Mounts in optional 1RU single (RK1) or dual (RK2,
RK2EZ) 19” rack kits

Specifications Subject To Change Without Notice Rev 11-11 ©Toner Cable Equipment, Inc.

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Specifications

QMOD HDTV Modulators

Feature QMOD-SDI QMOD-HDSC QMOD-HD

Application HD/SD-SDI Video Digital Signage/PAL Video HD Analog Media

HD Video SDI: Female BNC RGB In: RGBHV DB-15 female, RGB In: RGBHV DB-15 female

(1080i/720p/480i), auto-sync up to 1080p check crwww.com (1080i/720p/480p/480i),
Embedded SDi audio, selectable for resolution specs 59.94/29.97 Hz
for 1+2, 3+4, 5+6, 7+8 RGB Out: DB-15 female

Power 0.8 A maximum 1.1 A Maximum 0.7 A Maximum

Includes PS12-1.0 switching power PS12-1.5 switching power PS12-1.0 switching power

supply, 1A 12 VDC supply, 1.5A 12 VDC supply, 1A 12 VDC

Shared Features

Physical 8.5” [216mm] wide x 1.73” [62mm] height (1RU) x 6.0” [153mm] deep

1.5 lbs [0.68kg]
+32° to 122° F operating temperature, convection cooled
Rack mounting for one or two units side-by-side (RK1, RK2)

Encoding MPEG2 Profile:MP@HL for HD, MP@ML for SD

1080i, 720p, 480p, and 480i resolution, depending on input
Video Encoding bitrate 18 or 25 Mbps
MPEG1, Layer 2 audio
Latency 275ms 720p, 550ms 1080i

Modulation Switchable 64/256 QAM, J83 Annex B, Interleaving Modes (128,1) MER 38 dB typical

FCC Class B, ROHS, meets California standards

Front Power button

Setup, Select and directional buttons for menu setup
Menu LCD, 2 lines of 20 blue characters each

Back

Power 2.1mm coaxial jack (inside center conductor positive) 11.5 to 13.5 VDC, 12 VDC typical

Control DB-9 male, RS-232 data link to control system

300 to 19,200 baud (9600 default), 8 data bits, no parity, 1 stop bit
2 GPI contacts on pins trigger EAS

Analog Video RGBHV: HD-15, QMOD-HD1080i/720p 29.97/ 59.94 Hz, QMOD-HDSC up to 1920 x 1080

Component: RCA Y, Pb, Pr (1080i/720p/480p/480i) , 59.94/29.97 Hz
S-Video: Y(Composite), C (Blue Pb) 480i, 29.97 Hz
Composite Video: RCA female (480i), 29.97 Hz

Audio Digital SPDIF: Coax and TOSlink optical output, PCM 48K sample rate

Analog L and R: 2 stereo RCA female jacks
Inputs assignable to video inputs

EAS GPI inputs switch AV to composite video and assigned audio

RF ‘F’, female, 75 ohm impedance

Agile, channels 2-135 (48-860 MHz), standard, HRC, or IRC spacing
6 MHz bandwidth fits any open channel without interference to adjacent channels
1 KHz resolution, +/- 30 ppm accuracy, +/- 35 ppm stability
29 dBmV typical output power, attenuated in 5 steps, approx 4 dB

Options RK1 Single Rack Kit , RK1-AC Single Rack Kit with accessory shelf

RK2 Dual Rack Kit, RK2 EZ Dual Rack Kit