Toner Cable QMOD-HDMI User Manual
QMOD-HDMI 1.5 HDTV Modulator
Sources
One HDMI (non-HDCP) input, up to 1080p video and audio
One RGBHV/Component input, up to 1080p video
Two Composite video inputs for encoding, captioning, or EAS use
Two sets of stereo and SPIDF coax audio inputs
Encoding
Creates a high-denition 720p/1080i MPEG-2 stream for broadcast
Accepts stereo, PCM, or pass-through AC-3 audio, can create two MTS
sub-channels for each input, supporting two languages each
Includes captioning from Line 21 data on composite video inputs
Flex encoding downscales 1080p to 1080i, allows use of 720p/1080p 60Hz
sources, and compensates for 60/30 Hz sources such as consumer HD
cameras
Scaling upgrade adds scaling for many VGA resolutions, overscan
compensation, and positioning
2-channel upgrade allows selection of inputs to create
2 HD channels
Output
Delivers a fully agile QAM 64/256 digital cable channel 2-135
Up to 270 HD Programs/Channels per system
Streams IPTV from GigE Ethernet port
Distributes channel over an on-site broadband cable system with
adjustable output level to 29 dBmV, compatible with all cable format
broadband systems
Operation
Sets up with front-panel buttons and easy to use menus, including inputs,
encoding, channel, and RF options.
Onboard Web page for setup and monitoring
Control with IP Telnet commands
Saves power and rack space using efcient design
Includes compact switching power supply
Mounts in optional 1RU single (RK1) or dual (RK2EZ) 19” rack kits
Meets RoHS safety and California energy standards
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Applications
Digital Signage
HD/SD Cable Receivers
HD/SD Satellite Receivers
HD/SD Media Sources
Employing a totally new HD encoding
technology, the QMOD-HDMI1.5 continues
the QMODTM track record for quality and
innovation, setting a new benchmark for
features and performance. Users can
upgrade operation for digital signage
scaling and dual-channel operation by
entering optional upgrade key codes.
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
QMOD-HDMI 1.5 HDTV Modulator
Specifications
Feature
Physical 8.5” [216mm] wide x 1.73” [62mm] height (1RU) x 6.0” [153mm] deep
1.5 lbs [0.68kg]
+32° to 122° F operating temperature, fan cooled
Rack mounting for one or two units side-by-side optional (RK1, RK2EZ)
Encoding MPEG2 Profile:MP@HL for HD, MP@ML for SD
Auto-syncs to1080i, 720p, 480p, and 480i resolution, depending on input
Compensates for 60/30 Hz Component sources
Video Encoding bitrate 11, 13, 15, 18 or 25 Mbps (18 or less for dual-channel)
AC-3 (Pass-through or stereo) or MPEG1, Layer 2 audio
MTS Dual-language capability
Optional scaling accepts VGA resolutions, overscan compensation, and positioning
Optional dual-channel operation carries 2 full HD channels
Modulation Switchable 64/256 QAM, J83 Annex B, Interleaving Modes (128,1)
MER 38 dB typical
Compliance FCC Class B, ROHS, meets California standards
Front Panel Select and directional buttons for menu setup
Menu LCD, 2 lines of 20 white characters each
Back Panel
Power
EAS
2.1mm coaxial jack (inside center conductor positive)
1.1A maximum, 11.5 to 13.5 VDC, 12 VDC typical
Captive-screw terminal with 3 GPI Pins for momentary or latching control
Ethernet RJ-45 GigE Ethernet: Web page, control, streaming video
Video Inputs
HDMI (non-HDCP), up to 1080p
HD15 RGBHV/Component input up to 1080p, 59.94/60, 29.97/30 Hz
Composite Video: RCA female (480i), 29.97 Hz, also used for Line 21 captioning data
Audio Inputs
Two Digital SPDIF Coax RCA, PCM/AC-3 48K sample rate
Two 3.5mm stereo analog inputs
Inputs assignable to video inputs
RF ‘F’, female, 75 ohm impedance
Agile, channels 2-135 (48-860 MHz), standard, HRC, or IRC spacing
6 MHz bandwidth fits any open channel without interference to adjacent channels
1 KHz resolution, +/- 30 ppm accuracy, +/- 35 ppm stability
29 dB typical output power, attenuated in 5 steps, approx 4 dB
Includes Compact PS12-1.5 switching power supply, 1.5A 12 VDC, fits power strip
Free option to include PS12-4Y power supply with every 2-3 modulators when ordered
HD15 to RCA Component adapter cable
Options RK1 Single Rack Kit
RK2EZ Dual Rack Kit
Specifications Subject To Change Without Notice Rev 06-13 © Toner Cable Equipment, Inc.
Loading...