Toner Cable PSA-2500C User Manual

©Toner Cable Equipment, Inc. Specifications Subject To Change Without Notice.

Telephone: Nationwide: Fax: E-mail: Internet:

03/10

Avcom Portable Spectrum Analyzers

215-675-2053 800-523-5947 215-675-7543 [e-mail] http://www.tonercable.com

969 Horsham Road

Horsham, Pennsylvania 19044 USA

Portable Spectrum Analyzers

• Small Compact Design

• Battery Powered for Remote Field Use

• 13/18 Volt LNB Power & 22 KHz

• 4 R.B.W. Selections including 10 KHz

• Ethernet & Serial Communications

• Ability to Monitor the 10MHz Reference Signal

• User Friendly and Intuitive GUI

Technical Specifications PSA-2150C PSA-2500C

Frequency Coverage: 950MHz – 2,150 MHz 5 MHz - 2,500 MHz

Span Width: 0 - 1300 MHz

Resolution Bandwidth: 10KHz, 100KHz, 300KHz, 1MHz

RF Sensitivity: Greater than - 85 dBm Typical

Reference Levels: Selectable - 10 dBm, - 30 dBm, -50 dBm

Scale: 5 dB & 2dB per Division

Dynamic Range: 40 dB on Application Window

Amplitude Accuracy: +/- 1 dB typical

Frequency Accuracy: +/- 1KHz typical

Input Connector: “BNC” is standard “F”, “N”, “SMA” & “TNC” available

Inputs: Single is Standard, Dual Available

Size: 9.25” W x 6” H x 7” D

Weight: 6 lbs

Power Requirements: +15 VDC

Display: Full VGA Color LCD

PSA-2150C

Small Compact Design

The PSA-2150C was designed for the Field Engineer to have a very use­ful, compact tool that eliminates the need for carrying around a big bulky
bench-top unit. The PSA-2150C has the option to have dual switching
inputs so that you can easily setup cross pole or monitor 2 different feeds
simultaneously.

Improved Performance & Specifications

The new PSA-2150C was designed for excellent frequency and amplitude
accuracy with a wide variety of resolution bandwidth selections ranging
from 10KHz to 1MHz. This is required to allow for viewing and monitoring
of small TT&C and data carriers found in many satellite communications
markets today. The wideband input will also allow for monitoring of a
10MHz reference signal as well.

Versatile Graphical User Interface

The new Avcom Graphical User interface (GUI) is based on the National
Instruments Labview Platform and has been customized for several of our
customer’s applications. The Avcom GUI will run on the WINDOWS 2000,
XP and Vista platforms. Avcom also offers a multi user version of the
software so that multiple users can monitor at the same time.

PSA-2500C

950 - 2150 MHz

5 - 2500 MHz