Toner Cable IRD 3045 User Manual

IRD 3030/3035/3040/3045
Integrated Receiver Decoder
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
The IRD line offers today’s video professional a satel­lite or MPEGoIP inputs with a standard ASI input. The IRD provides high quality MPEG2 and H.264 decoding of HD and SD video formats with composite or SDI outputs. The SDI output can be enabled to support HD outputs as well.
Key Features
Commonly used inputs include DVB-S2, MPEGoIP and ASI, for a truly economical solution for SD decoding with an easy HD migration path
MPEG2/H.264 video decoding including two audio services and supported downmix/pass-through for a variety of supported common audio types
High quality SDI digital video and analog video out­puts
Receive and down-convert HD video to and SD output for broadcast or monitoring
Use the simultaneous ASI output to facilitate trans­port stream analysis or as an input directly to a multiplexer
Compatible with popular conditional access sys­tems including DVB-CI and BISS
Supports common metadata in VANC including closed captions and teletext
Supports DVB-subtitles
Applications
Decoding of MPEG2/H.264 video carried on satel­lite and IP networks for re-encode/retransmission applications
Decoding for confidence monitoring
Hospitality network operations
Decryption for turnaround applications
Specifications Subject To Change Without Notice Rev 03-11 ©Toner Cable Equipment, Inc.
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
AVAILABLE FORMATS
INPUTS
ASI: (2) BNC up to 160Mb/s DVB S/S2/DSNG: (4) F- Type (A/B)
QPSK, 16QAM, 8PSK, 16APSK, VCM,ACM,ISI filtering (advanced/license - able)
LNB Power: 13,18VDC, 22KHz tone
1-45Msym/s 950-2150 MHz
MPEGoIP: (2)10/100/1000 Base-T, RJ45
Encapsulation type- UDP and RTP Unicast/Multicast (IGMPv3) ProMPEG CoP3r2 FEC/SMPTE2022
Conditional Access: BISS 1/E
DVB-CI- (2) Slots,
Control: Front Panel
Web Interface-IE7 and up, Firefox3.0 and up SNMPV2 with traps
DECODER
Video: MPEG2- MP@ML (4:2:0)
MPEG2- HP@ML (4:2:0) H.264 - MP@L3.0
PAL, NTSC Max TS Bitrate: 160Mb/s Display Modes: Letterbox, cropped, anamorphic
AFD(SMPTE2016) Audio: (2) audio pair (decode, embed and
pass-through both compressed and
decoded formats)
AES
MPEG2
MPEG1
AC-3
DD+
DolbyE
Linear PCM
HE-AAC v2 ISO/IEC 14496-3:2005/
Amd.2(Including HE-AAC 7.1,
LOAS,ADTS)
PCM Downmix (selectable): L/R
(Stereo), Lt/Rt (Surround), Mono1,
Mono2
OUTPUTS
SDI: (2 BNC) ITU-BT.601/SMPTE 259M
Embedded Audio Format:
SMPTE272M
Number of Embedded Audio Channel
Pairs: 4 (2 complete audio groups)
Embedded Audio Types- MPEG-2,-1, AC3,DD+, DolbyE, PCM, HE-AAC Embedded CC- EIA-708B
Display Modes: Letterbox, cropped, anamorphic
Other Embedded Data Types:
Teletext, WSS,VPS (EN301775 embedded per SMPTE2031) VITC,AMOL I-II,TV Guide (SCTE127 embedded per SMPTE2031) AFD (SMPTE2016) VBI Insertion- Teletext, WSS,VPS,VITC,AMOL I-II,TV Guide, V-Chip
Composite: (1) BNC- NTSC/PAL
Overlay closed caption selectable Line21 CC Insertion-EIA-608B VBI Insertion- Teletext, WSS,VPS,VITC,AMOL I-II,TV Guide, V-Chip
Audio: (2) BNC (selectable)
(2) Stereo pair (balanced,terminal connector) AES MPEG2 MPEG-1 AC-3 DD+ DolbyE Linear PCM HE-AAC v2 ISO/IEC 14496-3:2005/ Amd.2(Including HE-AAC 7.1, LOAS,ADTS) PCM Downmix (selectable): L/R (Stereo), Lt/Rt (Surround), Mono1,
Mono2 ASI: (1) BNC up to 160 Mb/s MPEGoIP: (2)10/100/1000 Base-T, RJ45
Encapsulation type- UDP and RTP
Unicast/Multicast (IGMPv3)
Specifications
IRD 3030/3035/3040/3045
Integrated Receiver Decoder
MODEL INPUT OUTPUT
IRD-3030 DVB-S2 Composite IRD-3035 DVB-S2 SDI IRD-3040 IP Composite IRD-3045 IP SDI
Loading...