IPQT-12
GbE IP-Input Edge QAM Modulation System
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
GbE INPUTS
Input Connector Type 2 x RJ-45
Layer 1 Ethernet GbE (1000Base-T)
Layer 2 Addressing/Protocols Unicast (IP address
and Port), Multicast
Packetized data types SPTS/MPTS (ITU13818-1)
ETHERNET COMMUNICATION MANAGEMENT PORT
Input Connector Type 1 x RJ-45
Layer 2 Ethernet 10/100Base-T
Layer 4 Protocol TCP/IP
QAM-RF OUTPUTS
Output Frequency Range 50-1002 MHz
Channels Twelve (6 or 8MHz)
QAM Modulation Modes 16, 32, 64,128, 256
QAM Types ITU-A (DISH/DVB), ITU-B (USA/DCII)
QAM Symbol Rates 2.24~2.98, 4.85 to 7.0 Msps
PCR Re-Stamping Auto
Channel Plans/Frequencies EIA, HRC, IRC, custom
Output Level (effective, per channel) >45 dBmV
(combined, 12 channels) >32 dBmV
Output Attenuation 0-10 dB (0.5 dB step)
Output Level Flatness (50-1002 MHz) ± 0.75 dB
Spurious > 60 dBc
Output Connector 1 x 75Ω, F-Female
Output Return Loss >15 dB
GENERAL
INTERNAL AC POWER SUPPLY
Line Voltage 93-254 VAC, 47-63 Hz
Power Consumption 60 W
EXTERNAL DC POWER BACKUP
Voltage 12VDC±5%
Current < 4 A.
Ordering Information
IPQT-12 GbE IP-Input Edge QAM Modulation System
X-PS External Redundant Power Supply
Features
• Accepts a GbE IP input from
Technicolor COM100 systems
and other clear or preencrypted sources
• Two RJ45 inputs support
redundant IP input, dual
sourcing, or loop through
• Supports up to 12 QAM-RF
channels form 50 to 1002MHz
organized as 3 independent groups of 4 channels
• Provides a 10/100Base-T Ethernet port for configuration, control and monitoring
• Integrated web server allows local or remote access using standard PC internet browser and provides simple,
easy navigation of all IPQT-12 status and setup parameters
• Highly integrated 1RU rack mount chassis with support for external DC redundant power
• Includes EAS override support for clear QAM programming (with third party EAS receivers.)
Specifications
Front View Rear View