Toner Cable HDE-QAM User Manual

HDE-QAM

HD Encoder QAM 1x HDMI ► 1x QAM

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

HDE-QAM (HD Encoder-QAM) accepts one input in HDMI format, and delivers one HD MPEG-2 encoded output in
QAM format in the 5.75-864 MHz range.

Features

• Utilizes advanced motion estimation search to reduce “pixel trailing” on fast-moving videos (i.e. sporting events)

• Output bandwidth of 38.8Mbps at QAM 256 and capable of larger bandwidth with higher QAM modes

• Compatible with a large selection of HDMI devices; ten HDMI input parameters are user-selectable

• Compatible with a large selection of QAM tuners; ten QAM output parameters are user-selectable

• HD MPEG-2 encoder chip-set encodes single channel video in 480i/480p/720p/1080i formats

• Accepts compressed AC-3 audio and re-inserts into transport stream

• Supports sub-band QAM output of T7-T14 (5.75-53.75 MHz)

• Local and remote monitoring and control capabilities

• Front-panel RF test point (at 20 dB below output level)

Ordering Information

Model Stock # Description

HDE-QAM 6310A HDMI-to-QAM Encoder

HD MPEG-2 Encoding

Specifications Subject To Change Without Notice Rev 04-12 ©Toner Cable Equipment, Inc.

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

HDE-QAM

HD Encoder QAM 1x HDMI ► 1x QAM

Specifications

Connector: HDMI
Video Standard

480i: 720 x 480

720p: Main profile I & P Frames, 4:2:0 color components,

1280 x 720

1080i: Main profile I & P Frames, 4:2:2 color components,

1920 x 1080

Transport Rate: Variable, user-selectable from 9.7 to 100 Mbps
Video Rate: Variable, user-selectable
Video Pre-filter: Variable, user-selectable
GOP Size: Variable, user-selectable from 1 to 60
Intra DC Precision: Variable, user-selectable from 8- to 11-bit
Chroma Formats: 4:2:0 and 4:2:2 (ITU-R BT.601)
Colorspace Formats: YCbCR and RGB
Packet Format: MPEG-2 188-byte Transport Stream

Audio: Compressed Dolby® Digital Pass-Thru

Indicators: Power (Green LED)

Encoder (Blue LED)
Temperature (Red LED)
720p (Green LED)
1080i (Green LED)

Local Monitoring: Front-panel 16-character, 2-line LCD screen
Local Control: Front-panel Navigational Key-pad
Remote Monitoring/Control: GUI-based menu via Web browser

INPUT OUTPUT

ALARMS / MONITORING / CONTROL

Dimensions (W x D x H): 19.0 x 18.125 x 1.75 inches (483 x 460 x 44 mm)
Power: Operator Selectable @ 115 VAC/60 Hz or 230

VAC/50 Hz (Fuse: 3.0 amp, 250 VDC, Slo Blo)

Power Dissipation: 129 W
Weight: 13 lbs (5.9 kg)
Operating Temperature: 32 to 122 °F (0 to 50°C)
Storage Temperature: -13 to 158 °F (-25 to 70°C)
Operating Humidity: 0 to 95% RH @ 35°C max, non-condensation
Storage Humidity: 0 to 95% RH @ 35°C max, non-condensation
Certifications: UL Listed 60950

GENERAL

Connectors:

Primary: “F” Female

RF Test Port: “F” Female
QAM Modulation Modes: 16, 32, 64, 128, 256, 512, & 1024
DVB Symbol Rate: Variable; 1 to 7 MSymbols/sec (MBaud)
Frequency Range: 5.75 to 864 MHz, and

sub-channel 5.75 to 53.75 MHz

QAM Tuning

NTSC: Per channel’s number from T7 to T14 & 2 to 135

PAL: 8.5 to 861.0 MHz Per channel’s center-frequency

(12.5 kHz increments)

RF Level: +60 dBmV (120 dBμV)
RF Level LCD Screen Error: ±2 dB
RF Level Adjustment Range: 50 to 60 dBmV
Frequency Tolerance: ±0.5 kHz @ 77°F (25°C)
Frequency Stability: ±5 kHz over 32 to 122°F (0 to 50°C)
Amplitude Flatness: ±0.25 dB (over 6 MHz channel)
Phase Noise: -98 dBc (@ 10 kHz)
Spurious: -60 dBc
Broadband Noise: -75 dBc (@ +60 dBmV output level,

4 MHz bandwidth)

Impedance: 75 Ω
Return Loss: 12 dB
Spectral Inversion: Auto Recognition
Carrier Suppression: 55 dB
SNR: Greater than 40 dB
MER: Greater than 40 dB
I/Q Phase Error: Less than 1 degree
I/Q Amplititued Imbalance: Less than 1%
Encoding Profile

Video: MPEG-2 HD; ISO 13818-2; 1080i

MPEG-2 SD; ISO 13818-2; 480i

Audio: Pass through compress audio

Does Not Support Closed Captioning