Toa TZ-606W AS, TZ-606B AS, TZ-406W AS, TZ-406B AS, TZ-206W AS Instruction Manual

TOA Corporation

INSTRUCTION MANUAL

COLUMN SPEAKER

TZ-206B AS TZ-206W AS
TZ-406B AS TZ-406W AS
TZ-606B AS TZ-606W AS

Thank you for your confidence in our product.

Please follow the instructions stated in the manual carefully to ensure proper installation and to prevent any damage
to the equipment. This is important for longer duration of your equipment.

TOA Corporation

533-06-221-20

Traceability Information for Europe (EMC directive 2004/108/EC)

Manufacturer:
TOA Corporation
7-2-1, Minatojima Nakamachi, Chuo-Ku, Kobe, Hyogo,
Japan

Authorized representative:
TOA Electrics Europe GmBH
Suederstrasse 282, 20537 Hamburg,
Germany

URL: http://www.toa.jp/

1. SAFETY PRECAUTIONS

● Prior to installation or use of the speaker u nit, please read carefully the instruction manuals.

● You must thoroughly understand the safety precautions and important safety warnings stated in the

Instruction manual.

•

After reading, please keep the instruction manual for future use at any time.

6.3. TZ-606B AS and TZ-606W AS

Model No. TZ-606B AS TZ-606W AS
Enclosure Sealed type

Rated Input 60 W

Rated Impedance

100V line: 170Ω (60W), 330Ω (30W), 670Ω (15W), 1.3kΩ (7.5W)

70V line: 170Ω (30W), 330Ω (15W), 670Ω (7.5W), 1.3kΩ (3.8W)
Sensitivity 95 dB (1W, 1m)
Frequency Response 150 – 16,000Hz

Speaker Component 10 cm(4”) cone-type x 6
Input Terminals Push-in terminals

Finish

Enclosure HIPS, black HIPS, white
Punched Net Surface-treated steel plate, black, paint Surface-treated steel plate, white, paint
Speaker Bracket Aluminum die-cast, black, paint Aluminum die-cast, white, paint
Joint Bracket
Wall Bracket

Steel plate, t1.6, black, paint Steel plate, t1.6, white, paint

Dimensions 135 (W) x 746 (H) x 128 (D) mm (5.31” X 29.37” X 5.04”)
Weight 5.5 kg (12.12 lb) unit only

Accessories

Speaker bracket … 1, Joint bracket … 1, Wall bracket … 1, Fixing bolt M5 x 60 … 1,
Hexagon bolt M6 x 12 (with plain washer and spring washer) … 2,
Machine screw M5 x 20 (with plain washer and spring washer) … 2
Hexagon bolt M8 x 15 … 1

Option Speaker stand: ST-16A

Note: The design and specifications are subject to change without notice for product improvement.

WARNING

WARNINGWARNING

WARNING

CAUTIO

CAUTIOCAUTIO

CAUTIO

NNNN

Indicates a dangerous situation, improper action may result in
death or serious injury.

Indicates potential danger, improper action may result in minor
injury or equipment damage.

Installing the speaker unit with mounting brackets

• Mount the unit on a location strong enough to
support the weight of the unit and mounting
bracket. Doing otherwise may cause the speaker
unit to fall and result in personal injury / equipment
damage.

•

Do not apply other methods to mount the

Mounting Bracket other than the method
specified in the instruction manual. Speaker unit
may fall and cause personal injury.

• Use the screw compatible with the composition and

structure of the wall. Doing otherwise may cause
the speaker to fall and result in personal injury.

• Tighten each screw securely. Ensure no loose bolt

after speaker unit is mounted to prevent it from
falling and causing personal injury.

• Do not mount on a location exposed to constant

vibration because it may dismount or drop the
speaker.

• The speaker is designed for in-door use therefore
do not use it outdoors. Doing otherwise may bring

damage to the speaker or cause it to fall, resulting
in personal injury. If the speaker is wet due to rain,
it may cause short circuit.

• Do not apply anti-rust lubricant as it will damage the
plastic (resin) or rubber surface when applied and
cause the speaker unit to fall, resulting in personal
injury.

• Do not mount the unit in a humid room or poor
ventilation. Bracket will easily get rusty if mounted
in such a location, causing the speaker unit to fall
and resulting in personal injury.

When mounting Speaker Unit

• At least 2 people are required to lift it up or put it
into the box. If the unit topples, it may cause
personal injury.

• Avoid the sharp edge of the unit to prevent any
injury.

• To prevent short-circuit, ensure amplifier is
TURNED OFF when connecting it to the speaker
unit.

When Speaker Unit is in use (turned on)

• Do not place any heavy object on the speaker
which may cause the speaker to fall, resulting in
personal injury or damage to the unit. The
respective object will also fall and cause harm to
others.

• Do not operate the speaker for an extended
period of time with distorted sound. This indicates
improper operation and it may cause heat and
fire.

• Do not sit, stand or hang on the speaker unit.
Doing so may cause the speaker unit to fall,
resulting in personal injury or damage to the unit.

• Conduct regular check to detect any damage to

the unit or corrosion to the mounting bracket as
early as possible. Failure to do so may cause the
speaker to fall, resulting in personal injury.

CAUTI

CAUTICAUTI

CAUTION

ONON

ON

2

11