TOA M864D User Manual

Download

Page 1

M-864D

DIGITAL STEREO MIXER

A Fader-type Digital Stereo Mixer

for Multi-Purpose Venues

Permitting Analog-feel Parameter Setting

As Well As PC or LAN Operation

Page 2

TOA's proprietary digital technolog

ies enable optimal sound quality

adjustment for events of all kinds.

TOA's new M-864D digital stereo mixer maintains the basic functionality and operability of its predecessor,

the M-633D, but adds such versatile features as analog-feel fader operation, 8 monaural and 7 stereo input

channels, remote controller operation and fine-tuning of settings with GUI software. With its release, TOA has

made the clear sound achieved by its proprietary resonance control technology available for use in hotel

banquet rooms, multipurpose halls and other facilities that host events of various types.

Digital Stereo Mixer M-864D

Optimal sound control features

• Automatic Resonance Control (ARC) measurement and processing algorithm that optimizes speech

and sound clarity for individual acoustic environments

• Feedback Suppressor (FBS) function that eliminates feedback caused

by carrying the microphone from place to place

• Automatic stereo input mute (Auto Mute or Ducker) function that mutes

stereo input automatically when detecting a monaural control signal

Easy, convenient operation functions

• Analog-feel fine-tuning by slider control

• Front-mounted stereo input allowing connection of digital audio player

• Preset memory enabling operators to store user-specified settings in

response to specific needs

• Interconnection of up to five M-864D units in preset memory system via LAN

• Optional remote control panels (ZM-9011/9012/9013/9014) permitting

convenient remote operation and featuring an assign function supporting

convenient remote operation and featuring an assign function supporting assignment of such settings as volume control, channel ON/OFF,

assignment of such settings as volume control, channel ON/OFF, matrix switching and preset memory recall to specified buttons.

matrix switching and preset memory recall to specified buttons.

Response to exacting user requirements

• Dedicated GUI software facilitating higher-precision

parameter setting adjustment on PC via Ethernet LAN

Flexible configuration choices

• Stand-alone installation (4U rack-mountable)

• Finer speaker setting possible when used in combination

with optional Digital Speaker Processor DP-SP3

Page 3

Dynamic Microphone

Room Combining Application

5000 Series Wireless Microphone System

M-864D DIGITAL STEREO MIXER

• 4U fader-type digital mixer

• Automatic Resonance Control (ARC) function

• Feedback Suppressor (FBS) function

• Automatic Mute function

• Built-in analog gain/trim control

• Wall-mount remote controller

• Operation by external control device via LAN

• Advanced setting with intuitive GUI software

Ceiling Speaker F-2852C

••

DVD

HUB

PC software

DA-250FH 4-Channel Digital Amplifier

Ceiling Speaker F-2852C

Remote Controller ZM-9014Remote Controller ZM-9014

For those who require superior sound quality with easy, one-touch operation in a single-purpose venue

5000 Series Wireless Microphone

CD Player

M-633D Digital Stereo Mixer

DA-250D Dual-channel Power Amplifier

SR-H Line Array Speaker

M-633D DIGITAL STEREO MIXER

• Compact 1U size

• Automatic Resonance Control (ARC) function

• Feedback Suppressor (FBS) function

• Automatic Clipguard (ACG) function

• Automatic Mute function

Dynamic Microphone

Recording Device

Page 4

SPECIFICATIONS

Frequency Response 20Hz – 20kHz Sampling Frequency 48kHz Dynamic Range 100dB or more (IHF-A weighted) Distortion 0.03% or less, 1kHz, +4dB* input/output, 20Hz – 20kHz BPF Crosstalk -80dB or less, 1kHz Input 8 monaural input channels, removable terminal block (3P)

Phantom power (+24V DC, 10mA, ON/OFF switchable for each channel) Gain setting (settable for each channel) 7 stereo input (L, R) channels (1-A, 1-B, 1-C, 2-A, 2-B, 2-C, front mounted input) RCA jack (stereo mini jack provided on the front panel) : -10dB* (max. +10dB*), 10k Trim gain for each individual channel: - to 0dB (except front mounted input)

Output 4 output channels, +4dB* (max. +24dB*), applicable load 600 or more, electronically-balanced, removable terminal block (3P) 1 recording output (L, R) channel: -10dB* (max. +10dB*), applicable load 1k or more, RCA jack Gain is adjustable

Contact Input 8 channels, open voltage: 24V DC, short-circuit current: 5mA, removable terminal block (10P)

Contact Output 8 channels, no-voltage make contact, contactcapacity: 24V DC/100mA, removable terminal block (10P)

Remote Control Panel 2 channels, Maximum number of units: 8 units per channel 24V DC input x 2, termination ON/OFF switch x 1, removable terminal block (10P)

cable) or shielded Cat 5 twisted pair cable for LAN (CAT5-STP) Network Network I/F: 1 channel of 10BASE-TX (auto-negotiation),

RJ45 connector, connection via switching hub Network protocol: TCP/IP Connection cable: Shielded Cat. 5 or higher twisted pair cable for LAN (CAT5-STP or better) Maximum cable length: 100m (between M-864D and switching hub)

Preset Memory 16 Signal Processing

Feedback Suppressor Function Filter: 8 channels (each monaural input channel), high-pass filter: 20Hz – 20kHz Tone Controller: BASS, MID, TREBLE Paranetric Equalizer: 20Hz – 20kHz, 15dB, 4 channels (each output channel) Matrix: 12 x 4 Crosspoint Gain: - to 0dB in 1dB steps Auto Mute Function

Function Input PAD control, Low cut control, Analog output attenuator control, Front panel operation lock function, Stereo summing function, Function setting panel

Front Panel Section Input Level Indicator, Output Level Indicator, ARC Measuring Start Switch: ON/OFF switch, Feedback Suppressor (FBS) Function: ON/OFF switch, Low Cut: ON/OFF switch, Stereo Summing: ON/OFF switch Tone Control: BASS/MID/TRWBLE, Monaural Input, Analog Setting: Gain setting, PAD ON/OFF, Phantom power ON/OFF Stereo Input, Analog Setting: Trim setting, REC OUT gain setting, Preset Memory switch,

Option Remote control panel: ZM-9011/9012/9013/9014, AC adapter: AD-246 *0dB = 0.775V

Type of cable: Shielded CPEV cable (a pair of data cable and a pair of power supply

Automatic Resonance Control (ARC) Function

Operation Status Indication

Personal Computer Requirements

Requirements CPU: Pentium 4, 2GHz or faster/ Memory: 1.5GB or more (2GB recommended)

Display: 1024 x 768 resolution or higher Free hard Disk Space: 16MB or more. however 600MB or more is required for the 32-bit version or 1.5GB or more for the 64-bit version when "NET Framework" is not yet installed Optical Driver: CD-ROM drive, Network Adapter: 10BASE-T or faster connection

OS Windows XP SP3 or later, Windows Vista (32/64-it) SP1 or later, Windows 7 (32/64-it edition)

Required Component NET Framework 4 Client Profile

*Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. *Pentium is a registered trademark of Intel Corporation. *Other company names and products are also trademarks of individual companies.

M-864D Digital Stereo Mixer

Front Panel Operation Lock switch

, Analog Volume Fader

M-633D Digital Stereo Mixer

Frequency Response 20Hz – 20kHz Sampling Frequency 48kHz Dynamic Range 90dB or more (IHF-A weighted) Distortion 0.03% or less, 1kHz, -10dB* input, 0dB* output (20Hz – 20kHz BPF) Input 6 monaural input channels (MONO IN 1 – 6),

selectable independently from 3 types of inputs below for each channel LINE : -10dB*, 2.4k MIC : -46dB*, 2.4k PHANTOM : -46dB*, 2.4k supplies phantom power of +24V DC, 10mA electronically balanced Removable terminal block (3 pins), phone jack 3 stereo inputs (L, R) (STEREO IN 1 - 3) -10dB*/10k, RCA jack (STEREO IN 1 - 3), Stereo mini jack (ST IN 1)

Output 2 monaural output channels (MONO OUT 1, 2), 0dB* (applicable load: 1k or more), electronically balanced, removable terminal block (3 pins) 1 stereo output (L, R) channels (ST OUT L, R) 0dB* (applicable load: 1k or more), electronically balanced, removable terminal block (3 pins) 1 stereo recording output (L, R) channels (ST OUT L, R)

-10dB* (applicable load: 1k or more), RCA jack

Bus Line Monaural channel x 2, Stereo channel x 1 Signal Processing

Feedback Suppressor Function, Automatic Clipguard Function, Automatic Mute Function

*0dB = 1V

Automatic Resonance Control (ARC) Function,

Optional Remote Control Panels

ZM-9011 ZM-9012 ZM-9013 ZM-9014

Human Society with Sound & Communication

TOA Electronics, Inc.

www.toaelectronics.com

orders@toaelectronics.com

Tel: 1-800-733-7088

Specifications are subject to change without notice.

TOA Canada Corporation

www.toacanada.com

sales@toacanada.com

Tel: 1-800-263-7639

(1305) 833-64-126-7B u