Titus T3SQ-2 QuickStart Manual

QUI C K S TA R T M ANU A L

DIGITAL T 3SQ

DIGITAL T 3SQ

www.titus-hvac.com | www.titus-energysolutions.com

T3SQ-2

Q U I C K S TA R T MANUA L

Loading the Software onto your PC

• Plug USB module into your PC

• Place Titus MLM CD into your PC drive

• Run the LHA Systems setup.exe file and follow the instructions for automatic installation.

• Also follow automatic instructions to load the required drivers onto your PC.

• Open the bacs.exe program by double clicking on

the icon.

• If no user levels are available in your software ver
sion password is “password”

• If user levels are available in your software version:
Password for installer is “password”, building ad
ministrator is “password2), Viewer is “password3”

• Go into the Tool-Bacs screen.

• Connect to the diffuser network by clicking the
“connect” icon below the word “file” on the screen.

• When using a USB module type in the serial num

ber on the box.

• When logging in using a TCP/IP network, type in
the IP address.

• Click on the “Connect bar”

• The diffusers will appear on the screen

• By pressing the “sync” icon the software will up

date information between controllers and
the software.

• Diffusers will now be displayed on
screen. All masters will display room and set point
temperature as well.

Quick Start Manual - T3SQ-2

2