Titan HSTNW-D02W User Manual

Engineered by HP

2

CONTENTS

English . . . . . . . . . . 4

French . . . . . . . . . 15

Regulatory Notices . . . 27

ENGLISH

54

Color Cover:
CMYK + CO OL GRE Y 9 +
PMS 293; fu ll bleed on e side

Flat size:
10 x 5 in.

Fol d 1:

saddle-stitched
booklet;

Color Inside pages:

CMYK + CO OL GRE Y 9 +PMS 293

Finished size:
5 x 5 in.

A B

CHARGING & TURNING ON THE WATCHSETTING THE TIME

1. Gently pull crown out to its

outermost position B.

2. Rotate the crown to the

correct time.

3. Press the crown to return it to

its normal position A.

NOTE: If you are storing the
watch, make sure to pull the
crown out to its outermost
position

B

.

2

1

3

Before you set up the watch, you
must charge the watch fully and
then turn it on.

1. Charge the watch for at least

two hours

1

,

2

,

3.

WARNING: Do not attempt to
change the battery yourself.
Opening the watch case will void
your warranty. Using an incorrect
battery may cause the watch to
overheat or catch fire.

NOTE: The first time you charge
the watch, the display might be
blank. After you set up the watch,
the charging icon is displayed
while the watch charges.

2. To turn on the watch, press and hold the top

watch button until the setup screen displays.

76

Color Cover:
CMYK + CO OL GRE Y 9 +
PMS 293; fu ll bleed on e side

Flat size:
10 x 5 in.

Fol d 1:

saddle-stitched
booklet;

Color Inside pages:

CMYK + CO OL GRE Y 9 +PMS 293

Finished size:
5 x 5 in.

1. Install the Titan Smartwatch

app. On your phone, go to
watches.hp.com or searc h for
Titan smartwatch in your
app store.
NOTE: Your phone must
have either iOS 8 or higher or
Android 4.4 operating system
or higher.

2. Make sure that your phone’s

Bluetooth® is turned on. See
your phone documentation
for instructions.

3. Open the Titan Smartwatch

app on your phone, and
then follow the on-scre en
instructions to set up
your account.

SETTING UP YOUR PHONE APP AND WATCH FOR THE FIRST TIME

4. The phone app automatically searches for nearby watches. Press the top

watch bu tton 1 so that the setup scree n is displayed and the app can fin d

your watc h.

5. In the phone app, select your watch. If prompted, press the top watch button

1

and enter the PIN displ ayed on your watch.

6. In the phone app, enable notification permissions. You can choose to push any

notifications from a third-par ty app, s uch as Face book or Twitter, to the watch.
See your phone documentation for instructions for enabling notifications.

7. To configure the watch, in the phone app, select Activity Tracker, World

Clock, Notifications, or Preferences. Notifications also controls vibration
notification settings. See Vibration Notifications on page 12 for more
information.

1

98

Color Cover:
CMYK + CO OL GRE Y 9 +
PMS 293; fu ll bleed on e side

Flat size:
10 x 5 in.

Fol d 1:

saddle-stitched
booklet;

Color Inside pages:

CMYK + CO OL GRE Y 9 +PMS 293

Finished size:
5 x 5 in.

DI SP L AYI NG TH E W ATC H S TATU S

To display the watch status,
press and hold button 2 for three
seconds. The status dismisses
automatically after five seconds.

Bluetooth status icon:
Appears when Bluetooth is
disconnected.

Charging status icon:
Appear s when the watch is
connected to power.

Battery status icon: Displays

remaining battery charge.

RE STA RT IN G T H E WAT CH

To restart the watch, press
and hold both buttons for three
seconds. Press button 2

to confirm.

1

2

NAVIGATING THE WATCH

TURNING BLUETOOTH ON OR OFF

To turn Bluetooth on or off, press and hold button 2 for three seconds.

NAVIGATING BETWEEN APPS

To navigate between apps (such as World Clock and Activity Tracker), press button

1

. To scroll the screen to read a text message or view the next page of an app (such

as yesterday’s steps in the Activity Tracker app), press button 2.

DISMISSING NOTIFICATIONS

To dismiss notifications or to decline a call, press button 1. Press and hold button 1
to dismiss all notifications.

TURNING AIRPLANE MODE ON OR OFF

To turn airplane mode on or off, press both buttons.

RESETTING TO FACTORY SETTINGS

To reset to factory settings, press and hold button 2 while pressing button 1 three
times. Press button 2 to confirm.

1110

Color Cover:
CMYK + CO OL GRE Y 9 +
PMS 293; fu ll bleed on e side

Flat size:
10 x 5 in.

Fol d 1:

saddle-stitched
booklet;

Color Inside pages:

CMYK + CO OL GRE Y 9 +PMS 293

Finished size:
5 x 5 in.

WATCH FUNCTIONS

TEXT MESSAGE

When you receive
a text message,
the sende r’s name

and message are
displayed. Press but ton 2 to scroll and
press but ton 1 to dismiss th e text.

ACTIVIT Y TR ACKER

The activity

tracker ke eps

track of your daily

steps and your
progress to your daily goal. You can check
today and yesterday’s steps on the watch.
A notification is displayed whe n you reach
your daily goal. Use the app to check your
progress over the week o r the month.

INCOMING CALL

1

2

When you have a n incoming call,
the calle r’s name is displayed. If
the calle r is not in your contacts,
their phone number is displayed
instead. Press button 1 to
decline the call.

WORLD CLOCK

The world clock syncs automatically with your phone.
In the app, you can select other time zones to be
displayed. Press button 2 to scroll through your
selected cities.

CALENDAR REMINDERS

The watch syncs with the calendar on your phone to
notify you of upcoming appointments. Press button 2
to scroll for mo re information, such as meeting time and
location. Press button 1 to dismiss the notification.

BAT T ER Y STAT U S

When the watch batter y has less than a 20% charg e,
there is a notification. There is also a notification when
the watch batte ry has less than a 10% charge.