Model T117
Travel Alarm Clock
With Flashlight
For Models That Require More Than One Battery
• Do not mix with used or other battery types/brands • Do not heat above 75ºC (167ºF)
• Replace all batteries at the same time • Do not expose contents to water
• Do not open batteries • Do not charge or recharge
• Do not dispose of in fire • Do not install backwards
Thank you for purchasing this Timex model T117 Travel Alarm Clock with Flashlight.
Please read this instruction manual carefully and completely to insure that you
understand the proper operation of your new alarm clock, and that you get the
maximum benefit from all the advanced features included in this model.
For additional information, online registration,
and exclusive special offers visit our website:
www.timexaudio.com
For questions or comments regarding this or other
products, please call our toll-free number 1-800-888-4491.
LED Flashlight
(pull out to turn on,
push in to turn off)
Fig. 2
(battery cover removed)
Controls and Their Functions
Fig.1
Front of Unit
Reverse Set
Rear of Unit
12/24 Hour Button
Forward Set
Alarm / Clock
Setting Turn Knob
(pull out for clock
setting)
12/24 HR
Snooze/Light Button
Snooze /
Alarm Off Switch
Battery Installation
Installing the Batteries
Remove the battery compartment cover by pressing on both of the locking tabs
together and lifting the cover upward.
Insert 4 “AAA” batteries in the battery compartment located at rear. We recommend
using a well-known brand of alkaline batteries for longest life and best performance.
Be sure to insert the batteries according to the polarity markings engraved in the
compartment. If the batteries are inserted incorrectly the unit will not work.
Replace the battery compartment cover and make sure it is securely locked.
Battery Door
Battery Compartment