Timeguard TRT030DN, TRT030N, TRT031N, TRT032N Operating Instructions Manual

Installation & Operating Instructions

Digital Electronic

Room Thermostat

Model: TRT030DN

1

1. General Information

These instructions should be read carefully and retained for further reference
and maintenance.

2. Safety

• Before installation or maintenance, ensure the mains supply to the
thermostat is switched off and the circuit supply fuses are removed
or the circuit breaker turned off.

• It is recommended that a qualified electrician is consulted or used for the
installation of this thermostat and install in accordance with the current
IEE wiring and Building Regulations.

• Check that the total load on the circuit including when this thermostat is
fitted does not exceed the rating of the circuit cable, fuse or circuit breaker.

• To clean use a clean dry cloth only. Do not use any liquid cleaners.

3. Technical Specifications

• 230V AC 50 Hz

• This time switch is of Class ll Construction and must not be earthed

• Switch Rating: 6(2)A

• Switch Type: Single pole, single throw (SPST)

• Connection Type: 3 wire

• Installation Type: Surface mount with wall plate

• Micro Disconnection: Type 1.B control action

• Operating Temperature Range: 0°C to +40°C

• Set Temperature Range: Minimum +5°C (frost setting)
to maximum +30°C

• Temperature Swing Adjuster: +/- 0.5°C or 1.0°C set by DIP switch

• PID Adjustment: ON or OFF set by DIP switch

2

• Boiler Type Adjustment: 3CYC = Gas, 6CYC = Oil, set by DIP switch

• Output Light: Blue LED

• CE Compliant

• Dimensions (H x W x D): 86 x 88mm x 38mm

TRT030DN Front View

Digital room temperature display

The heating symbol
will show when heat
is demanded

Blue LED output indicator

Easy set dial adjuster