THUNDER TIGER Explorer 1500 Pro, 4385-F00 Assembly Manual

Specifications

Wing Span: 59-1/16”(1500mm)

Length: 40”(1016mm)

Weight: 2 lbs.(915g)

Thunder Tiger Corporation guarantees this model kit to be free from defects in both material and workman­ship. The total monetary value under warranty will in no case exceed the cost of the original kit purchased.
This warranty does not cover any components damaged by use or modification. Part or parts missing from
this model must be reported within 60 days of purchase. No part or parts will be sent under warranty without
proof of purchase. To receive part or parts under warranty, the service center must receive a proof of
purchase and/or the defective part or parts. Should you find a defective or missing part, contact the autho­rized Thunder Tiger Service/Distributor nearest you. Under no circumstances can a dealer or distributor
accept return if assembly has started.

WARRANTY

This is not a toy. Assembly and flying of this product requires adult supervision.
Read through this book completely and become familiar with the assembly and flight of this airplane. Inspect
all parts for completeness or damage. Contact authorized distributors for customer service if you encounter
any problem.

NOTICE: ADULT SUPER VISION REQUIRED

No.4385-F00

INTRODUCTION

Thank you for your purchase of the Explorer 1500, a great choice to relax yourself to fly in blue sky wih this environ­mentally friendly glider. Features lite and durable EPO material, efficient C2415-1150KV motor and advanced folding
propeller make this glider high power-to-weight ratio for ultra performance and rapid climbing.
Explorer is speiclly designed for intermediate to advance pilots. Before beginning the assembly read this instroduc­tion thoroughly to gain an understanding of the sequence of your kit. If you find any of the parts are either missing or
damaged, please contact the authorized distrbutors for customer service.
Thank you for purchasing the"Explorer 1500"remote control model airplanes from THUNDER TIGER, and we hope
this plane will bring endless joy to you after you choose it.

1. Explorer 1500 is a sport glider for intermediate to advance pilots with basic flying skill and experience.

2. High Speed,stable flight and easy to control. Explorer 1500 can achieve axial rolls, inverted flight,inside loops,
outside loops and other aerobatic actions.

3. With modular and humanization design, Explorer 1500 is easy to carry and maintain.

4. With automatic heat dissipation function in power system, it ensures the high efficiency and prolongs the use life of
the motor, ESC and battery for Explorer 1500.

5. With many Carbon Fiber reinforced Polymer material, it ensures the strong structure in the flight.

INDEX

IMPORTANT NOTES & WARRANTY
INTRODUCTION
CONTENT
ASSEMBLY PROCEDURE
ADJUSTMENT STEPS
CONFIRMATION OF CG LOCATION
SAFETY PRECAUTIONS
SPARE PARTS
DECLARATION OF CONFORMITY
DISCLAIMER

00
01
01
02
03
03
03
04
05
06

01

OTHER ITEMS REQUIRED

A checklist is provided as below which will makes shop­ping for these items easier.

Transmitter

Transmitter (4CH) with Receiver
are highly recommened.

LiPo Charger

Battery

Recommend the use of a 3S
(11.1V) 2200mAh 20C LiPo
Battery.

CONTENT

Fuselage, main wings, horizontal tails, connecting
rods and Y harness as shown in the picture.

02

ASSEMBLY PROCEDURE

1. Assembly of the horizontal tails

Take of the horizontal tails and the
connection rod for the horizontal tails,
please install them to the assembling
groove at the tail parts of fuselage as
per the right position, then lock the
horizontal tails by screws.

2. Assembly of the main wings

Take of the Main wings & Aileron servo
Y harness & Connection rod for the
main wings & Screws. Firstly, please
insert the connecting rod into right and
left main wings and connect them
together. Then please connect aileron
servo with Receiver by the Y harness.
Finally, please put the assembled main
wings to the right position on the back
of fuselage and lock them by the
screws. Please make sure there is no
gap or shaking.

3. Close the canopy and then the assem­bly of "Explorer 1500" is finished.