Page 1
B
51100956
MAintenAnce
GUiDe
Page 2
MAxIMIzING THE LIFE OF YOUR CARRIER DEPENDS ON HOW
WELL THE PRODUCT HAS BEEN LOOKED AFTER AND MAINTAINED,
AS WELL AS THE TYPE AND INTENSITY OF USE, SUCH AS:
FREQUENCY AND MILEAGE
The more often the carrier is used and the farther it goes, the more it will wear.
LOADING
The higher the weight in the carrier, the faster certain components will wear.
ROAD CONDITIONS
Hard cornering, fast acceleration, braking and rough terrain all contribute to
increased wear of various components.
EFFECTS OF THE WEATHER
Long exposure to UV rays, extreme temperatures, humidity, road grit (sand and
dirt), and contact with salt contribute to the wear of your carrier.
STORAGE
Storing your carrier properly is essential to reducing the amount of wear
to components.
LEVEL OF MAINTENANCE
Service intervals, means of maintenance, storage, cleaning, servicing and
inspection work will all help to dramatically reduce wear of critical components.
DID YOU KNOW?
www.thule.com
51100956 - B
Page 3
Hitcharm
Remove to inspect for any damage
a. Ball joint
b. Backup straps
c. Cracks in main body, especially around holes that
attach to VersaWing
VersaWings
Inspect for any damage, including breaks, cracks or
looseness
Fabric
Inspect for tears, holes, open seams and any
other damage
Harnesses and seatbelts
Inspect webbing and thread for fraying, cuts and
any other damage
Buckles
Inspect for damaged buckles
Wheels, bearings, spokes and axles
Inspect for cleanliness, corrosion, smooth operation
and proper push-button function
Suspension
Inspect the springs for cracks, breaks or severe
corrosion
Handlebars
Inspect for secure attachment of quick release
buttons and brackets on CX
Autolock brackets
Inspect folding for proper engagement, looseness,
damage, cracks and smooth function
Quick release mechanisms
Inspect for proper lever attachment
Parking brake function
Inspect for proper function and locking ability
Fasteners
Inspect for tightness, missing nuts, missing bolts,
excessive corrosion
Frame
Inspect any frame piece for dents, cracks, excessive
corrosion or breaks
Accessories
Inspect any accessories in the same way as
the carrier
THE BEST WAY TO PROLONG THE LIFE OF YOUR CARRIER
DURING USE IS TO INSPECT IT MONTHLY AS PER THE MANUAL,
PAYING PARTICULAR ATTENTION TO THE FOLLOWING:
INSPECTION CHECKLIST
www.thule.com
NOTE - If you find any item on your carrier that is showing signs of abnormal wear and tear contact your
authorized Thule Chariot retailer immediately. Your authorized Thule Chariot retailer will advise you on the
required maintenance to ensure that you get the maximum performance and enjoyment from your carrier or
contact us directly at thule@mailnj.custhelp.com
51100956 - B
Page 4
OUR PRODUCTS HAVE
COMPONENTS OR PARTS
WHICH ARE SUBJECT TO
NATURAL WEAR AND TEAR
DEPENDING ON THE TYPE AND
DEGREE OF USE, AS WELL AS
HOW WELL THE INDIVIDUAL
PRODUCT HAS BEEN SERVICED
AND MAINTAINED.
Where there has been regular use (day in and
day out, in varying weather conditions) individual
parts or components can reach their wear limit
before the warranty has expired. Please note
that in cases where the product has become
prematurely worn because of excessive use, the
product is not considered defective.
For more information, email us at:
thule@mailnj.custhelp.com
www.thule.com
51100956 - B
SERVICE AND CARE
There are certain factors that influence wear and
tear and some of these can be prevented by
following these guidelines:
If at all possible, avoid long exposure to
sunlight
Always store carrier in a dry place
If storing outside, use storage covers to
protect from the elements
Regularly check the air pressure in the tires
Cold: At extremely cold temperatures below
-20°C/-4°F some materials can get brittle
and are more susceptiple to cracking
Regularly check the carrier for damage and
have any damage repaired immediately
Regularly clean the carrier as per the manual
Do not make any modifications to the carrier
Loading...