Thomson 26HS4246C, 26HU5253, 26HU5253W, 32HS4246C User Manual
Chapter 1
Getting started
Important information
Safety
Ensure that your domestic mains supply voltage
matches the voltage indicated on the identication
sticker located at the back of your set. Where the
mains plug or an appliance coupler is used as
disconnect device, the disconnect device shall remain
readily operable.
On certain models, the light indicator is located at the
side of the TV set. The absence of a light indication
at the front does not mean that the TV set is fully
disconnected from the mains. To disconnect the TV
set completely, the mains plug must be pulled out.
The TV set’s components are sensitive to heat. The
maximum ambient temperature should not exceed
º
Celsius. Do not cover the vents at the back or
35
sides of the TV set. Leave sufcient space around
it to allow adequate ventilation. Install the appliance
away from any source of heat (replace, ...) or
appliances creating strong magnetic or electric elds.
Moisture in rooms where the set is installed should
not exceed 85% humidity. Apparatus shall not be
exposed to dripping or splashing and no objects
lled with liquids, such as vases, shall be placed
on the apparatus. Moving the set from a cold place to
a warm one can cause condensation on the screen
(and on some components inside the TV set). Let the
condensation evaporate before switching the TV set
on again.
WARNING
To prevent the spread of re, keep candles or
other open ames away from this product at
all times.
or POWER/ button on the TV set or the
The
button on the remote control can be used to switch it
on and put it into standby mode. If you are not going
to be watching the TV for a lengthy period of time,
switch it off completely by removing the plug from the
mains power socket.
During thunderstorms, we recommend that you
disconnect the TV set from the mains and aerial so
that it is not affected by electrical or electromagnetic
surges that could damage it. For this reason, keep
the mains and aerial sockets accessible so they can
be disconnected, if necessary.
Unplug the TV set immediately if you notice it giving
off a smell of burning or smoke. You must never,
under any circumstances, open the TV set yourself,
as you run the risk of an electric shock in doing so.
TV screen
The TV screen used in this product is made of glass.
Therefore, it can break when the product is dropped
or impacted upon by other objects.
The TV screen is a very high technology product,
giving you nely detailed pictures. Occasionally, a few
nonactive pixels may appear on the screen as a xed
point of blue, green or red. This does not affect the
performance of your product.
Care
Use a glass-cleaning product to clean the screen and
a soft cloth and mild detergent to clean the rest of the
set.
Important: Using strong detergents, alcohol-based
and abrasive products may damage the screen.
Dust the vents at the back and sides regularly. Using
solvents, abrasive or alcohol-based products could
damage the TV set. If an object or liquid enters inside
the appliance, unplug it immediately and have it
checked by an authorized engineer. Never open the
appliance yourself since this may put you at risk or
damage the appliance.
Hanging the TV set on the wall
Warning: This operation requires two people.
To ensure a safe installation, observe the following
safety notes:
Check that the wall can support the weight of the TV •
set and wall mount assembly.
Follow the mounting instructions provided with the •
wall mount. For certain models, make sure to screw
the hexagonal VESA wall mounting screw bosses
(and screws) provided with the set into the nuts for
the wall mount at the back of your set before your
wall mounting.
The TV set must be installed on a vertical wall.•
Make sure to use only screws suitable for the •
material of the wall.
Make sure that the TV set cables are placed so that •
there is not danger of tripping over them.
All other safety instructions about our TV sets are
also applicable here.
Handling the TV set on the table
Before setting up your television set, make sure that
the surface you want to put the set on can support its
weight.
Don’t place the set on an unstable surface (e.g.
moving shelf, very edge of a unit) and make sure that
the front of the television set does not overhang the
surface it is sitting on.
This product is designed and manufactured
with high quality materials and components
which can be recycled and reused.
This symbol means that electrical and
elec
tronic equipment, at their end-of-life,
should be disposed of separately from
Please, dispose of this equipment at your local community
waste collection/recycling centre. In the European Union
there are separate collection systems for used electrical
and electronic product. Please, help us to conserve the
environment we live in!
your household waste.
EN 1
OUT
IN
ANTENNA
IN
OUT
OUT
IN
ANTENNA
OUT
OU
T
Getting started
OUT
Connect the power and antenna
To switch on TV after connecting power cord, press or
POWER/
Note: Position of power socket varies according to TV model.
.
DVD recorder, cable receiver
TV
On certain models, you have to turn on
the power switch rst.
Cable
Note: Disconnect the
DVD
recorder
Set-top
box
power cord before
connecting devices.
Cable
DVD player, home theatre system Blu-ray Disc player, headphones, HD game
TV
console & HD camcorder
TV
Notes:
- Excessive sound pressure
from earphones and
headphones can cause
hearing loss.
- Number of HDMI may vary.
- USB connector is for data
input from USB storage
devices.
English
PC
TV
Or use an HDMI
connection.
PC
Note:
Before connecting a PC, set the PC
monitor refresh rate to 60Hz.
DVD player/
Home theatre system
Blu-ray Disc player
HD game console
HD Camcorder
Notes:
- The gures are for representation only.
- Not all connections available on all models.
- The location of the power socket on the TV may
vary according to TV model.
- The positions and names of the function buttons
and connectors on the TV may vary according to
TV model.
EN 2
Getting started
Remote control functions
Most of your television's functions are available via the menus that appear on the screen. The remote control
supplied with your set can be used to navigate through the menus and to congure all the general settings.
Source
0-9
ECO
Guide
Menu
Exit
/*Zoom+/-
OK
To select connected devices.
Standby / quit standby.
To select a channel, page or setting.
To select desired power saving mode.
To toggle the Electronic Programme
Guide on or off (only available for digital
channels).
To access the main menu; to return to the
previous menu.
To exit the menu structure or Teletext.
To navigate in the main menu; to select
menu options; to switch to the previous or
next photo, song or video in USB function.
To navigate in the main menu; to set
functions and change values. ► can
also be used to open the corresponding
submenu.
* To select the picture format.
Note: You are recommended to use the full
screen mode. Do not use the display mode
with black bars on both sides of the picture
(such as 4:3) for long time, otherwise the
TV screen may be damaged permanently.
To open the corresponding submenu and
activate a setting in menus; to freeze/
SUBTITLE
unfreeze the picture in digital TV mode.
Option
To display the function menu to perform
certain operations; to display the Teletext
page in different mode.
Return
To return to the previous channel; to return
to the previous menu in USB function.
V+/-
To control the volume.
Info
To display programme information, if
available.
Mute
To switch the sound off and back on again.
P+/-
To change channels.
TEXT
To toggle Teletext on or off.
To select a subtitle language available for
selected digital TV programme.
LIST
To display channel list.
TV
To access TV mode.
Colour
To select tasks or Teletext pages. The
red button can also be used for MHEG
buttons
function.
Lang
To select a sound type available for
selected analog TV programme; to select
an audio language available for selected
digital TV programme.
Important:
Battery shall not be exposed to excessive heat such as sunshine, re or the like. If the batteries in your remote
control are run down you can use the buttons on your TV set. In TV mode, they have the same functions as the
corresponding buttons on the remote control. In the menus they have the following functions:
For models with OK button on the set: For models without OK button on the set:
PR+ or PR ▲ ▲ PR+ or PR ▲ ►
PR- or PR ▼ ▼ PR- or PR ▼ ◄ & OK
VOL+,
VOL-,
MENU or
+ or VOL ► ► VOL+, + or VOL ► ▲
- or VOL ◄ ◄ VOL-, - or VOL ◄ ▼
Menu MENU or Menu
OK OK
Switching on/off and standby mode
Switch on/off your TV
When powered on, the TV will be turned on directly.
To switch it off, unplug the mains socket from the
mains outlet.
Switch to standby
Press the
button on the remote control. The TV set remains
or POWER/ button on the set or the
powered up, but with low energy consumption.
Switch on from standby
Press the
or POWER/ button on the set or the
button on the remote control to switch the television
on at the last channel in the last mode, i.e. analog or
digital, or AV programme you were watching.
(*On certain models, you have to turn on the power
switch rst.)
EN 3
Loading...