Thomann UL 241 Quick Start Guide

Thomann UL 241 Quick Start Guide

UL 241 | Headset

Safety instructions

Intended use

This device is used to convert acoustic signals into electrical signals as well as their wireless transmission. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts from the product. They could swallow the pieces and choke! Never let children unattended use electrical devices.

Possible hearing damage

With headset connected, the device can produce volume levels that may cause temporary or permanent hearing impairment. Do not operate the device permanently at a high volume level. Decrease the volume level immediately if you experience ringing in your ears or hearing impairment.

Incorrect handling of lithium batteries can result in injury

In the event of a short circuit, overheating or mechanical damage, lithium batteries can cause severe injuries. Store lithium batteries in a cool, dry place, away from heat sources, ideally in the original packaging.

Features

Wireless headset with transmitter and volume control

Compact receiver with 3.5 mm mini jack plug

Adapter to 6.3 mm jack (with thread) included

2.4 GHz technology, worldwide free of registration and charge

Quick Start Guide

EN

 

This quick start guide contains important information on the safe operation of the product. Read and follow the safety advices and instructions given. Retain the quick start guide for future reference. If you pass the product on to others please include this quick start guide.

Lithium batteries are hermetically sealed. Never attempt to open a lithium battery. Only use powder extinguishers or other suitable extinguishing agents to extinguish a burning device containing lithium batteries.

Electromagnetic compatibility with other electrical equipment

Using the device near radios or TV sets may cause interference. Then increase the distance between the devices.

Where to use the product

Never use the product

in direct sunlight

in conditions of extreme temperature or humidity

in extremely dusty or dirty areas

at locations where the unit can become wet

near magnetic elds

General handling

To prevent damage, never use force when operating the switches and controls.

Never immerse the appliance in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or ammable cleaning agents.

Keep foreign substances from the unit!

Keep the device away from containers with liquids. Should any liquid get into the unit, this could lead to its destruction or re. Be sure not to let any metal objects into the unit.

Built-in lithium-ion batteries (3.7 V, 500 mAh, not replaceable)

Charging via supplied USB adapter

Battery life up to 6 hours

Operating range up to 15 m

Operating elements & connections

1

Receiver

2

Headband

3

Transmitter

4

Volume controls on transmitter

5

Microphone

6

3.5 mm jack plug of the receiver

7

Charging port receiver

8

On / off switch receiver

9

Charging port transmitter

10

On / Off switch transmitter

Using the device

1.Connect the 3.5 mm jack plug of the receiver to the microphone input of a mixer or other audio device. If necessary, use the supplied 6.3 mm jack adapter.

2.Turn on the receiver by setting its on / o switch to the ON position. The power indicator ashes.

3.Turn on the transmitter by setting its on / o switch to the ON position. The power indicator ashes. Transmitter and receiver now synchronize automatically. After successful synchronization, the power indicator lights up solid.

4.Put on the headset with the headband running behind the head.

5.Speak or sing into the microphone and adjust the volume as desired using the control on the transmitter. Do not move farther than 15 m from the receiver, otherwise the connection will break o .

6.Fully charged batteries allow operation for about 6 hours. When the charge of the built-in batteries decreases, the power indicators turn red. If it drops below 10%, the power indicator goes out. The batteries must then be charged.

7.To charge the built-in batteries, connect the devices to a USB Type-A power source or USB power adapter (e.g., item no. 373709) using the supplied USB adapter.

8.After use, switch o the devices by turning their on / o switches to the OFF position. The operating indications then go out.

Technical speci cations

Operating range:

max. 15 m

Battery life:

approx. 6 hours

Lithium-ion-battery:

3.7 V, 500 mAh (not replaceable)

Weight:

48 g

For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.

Remove replaceable lithium batteries from the device before disposal. Protect used lith- ium batteries from short circuits, for example by covering the poles with adhesive tape. Permanently installed lithium batteries must be disposed of together with the device. Please inquire about a suitable acceptance point.

This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose of your old device with your normal household waste. Dispose of this product through an approved waste disposalrm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de

DocID: 462303_21.12.2020

Loading...