TrueTone T-20
Pick-up for acoustic string instruments
Safety instructions
Intended use
This product is intended to be used as a pick-up for acoustic string instruments. Any
other use or use under other operating conditions is considered to be improper and
may result in personal injury or property damage. No liability will be assumed for
damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure
that children do not detach any small parts from the product. They could
swallow the pieces and choke! The adhesive must not be swallowed.
Keep away from children. If swallowed, seek medical attention immediately!
Where to use the product
Never use the product
• in direct sunlight
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
• near magnetic elds
Features
• Housing made of maple
• Advanced shielding
• Easy handling and installation
Quick Start Guide
This quick start guide contains important information on the safe operation of the
product. Read and follow the safety advices and instructions given. Retain the quick
start guide for future reference. If you pass the product on to others please include this
quick start guide.
General handling
• To prevent damage, never use force when using the pick-up.
• Never immerse the appliance in water. Just wipe it with a clean dry cloth. Do not
use liquid cleaners such as benzene, thinners or ammable cleaning agents.
• Not suitable for use on guitars with nitro lacquer or shellac. With long-term
mounting on instruments with polyester coating, the lack of light exposure on the
mounting spot can cause discolouration on the instrument.
Keep foreign substances from the unit!
Keep the device away from containers with liquids. Should any liquid get into the
unit, this could lead to its destruction. Be sure not to let any metal objects into the
unit.
• Balanced timbre
• High sensitivity
• Re-usable adhesive included
EN
Installation
1. Clean the instrument surface where you want to put the pick-up.
2. Try dierent positions for pick-up location. Here are some suggestions:
3. Connect the pick-up cable to a suitable amplier.
4. You can use the pick-up with the following instruments:
Acoustic guitar Banjo Cello
Classical guitar Mandolin Ukulele
Violin
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow
the notes and markings on the packaging.
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de DocID: 382442_22.12.2020